The objective of this article is to present finite element modelling protocols and validation studies for the new cold-formed-steel-framed shear walls sheathed with steel sheet and gypsum boards. In this model, the nonlinear behaviours of the tapping screw connectors are represented by employing the ‘Pinching4’ material along with ‘zeroLength’ elements. The constitutive relationship parameters of the ‘Pinching4’ material were determined based on experimental data from the self-tapping screw connector shear test performed by the authors. The proposed procedure is implemented to generate the analytical specimens of seven full-scale cold-formed steel shear walls in the OpenSees platform. The load–deformation relationships, hysteresis curves and skeleton curves are compared with the test results performed by the authors. The results show that the finite element models can accurately simulate the shear characteristics of the new cold-formed steel shear walls. Finally, the effects of steel sheet thickness, stud thickness, sheathed material and height-to-width ratio of walls on the shear resistance were investigated.
Fire resistance of cold‐formed steel framed shear walls under various fire scenarios
