Exploratory Analysis of Long-Term Performance of Pavement Using Reclaimed Asphalt Pavement

Author(s):  
Zijun Mei
2020 ◽  
Vol 12 (20) ◽  
pp. 8343
Author(s):  
Ana E. Hidalgo ◽  
Fernando Moreno-Navarro ◽  
Raúl Tauste ◽  
M. Carmen Rubio-Gámez

The main characteristics of bituminous mixtures manufactured with a considerable amount of reclaimed asphalt pavement (RAP), compared to conventional mixtures, are a reduction in workability, an increase in stiffness, and a loss of ductility, due to the presence of the aged bitumen contained in the RAP particles. To minimize these impacts, softer binders or rejuvenators are commonly used in the design of these mixtures in order to restore part of the ductility lost and to reduce the stiffness. In spite of previous investigations demonstrating that the mortar plays an essential role in the workability, long-term performance, and durability of bituminous mixtures (where cracking, cohesion, and adhesion problems all start at this scale), not many studies have assessed the impacts caused by the presence of RAP. In response to this, the present paper analyzes the workability, fatigue performance, and water sensitivity of bituminous mortars containing different amounts of RAP (from 0% to 100%) and rejuvenators. Mortar specimens were compacted using a gyratory compactor and studied via dynamic mechanical analysis under three point bending configuration. The results demonstrated that the presence of RAP reduces the workability and ductility of asphalt mortars. However, it also causes an increase in their stiffness, which induces a more elastic response and causes an increase in their resistance to fatigue, which could compensate for the loss of ductility. This aspect, together with the low water sensitivity shown, when using Portland cement as an active filler, would make it possible to produce asphalt materials with high RAP contents with a similar long-term mechanical performance as traditional ones. In addition, the use of rejuvenators was demonstrated to effectively correct the negative workability and ductility impacts caused by using RAP, without affecting the fatigue resistance and material adhesion/cohesion.


Author(s):  
Milad Zokaei Ashtiani

This study is an attempt to create a framework, using the best available inventory data, to perform lifecycle assessment (LCA) on asphalt pavement production. In particular, the use of reclaimed asphalt pavement (RAP) as an end-of-life product of deteriorated pavements is under consideration. Following ISO 14000 series standards, the framework constitutes the four major LCA steps in defining goal and scope, lifecycle inventory analysis, environmental impact assessment, and results interpretation. Three different scenarios in which varying portions of RAP are incorporated into hot mix asphalt production are to be compared. The system boundary of this study is limited to the construction and rehabilitation phases and ignores the vehicular use phase. It was found under this study that since high RAP mixtures require more frequent and aggressive maintenance activities, the overall footprint of asphalt pavements constructed with higher RAP contents is also higher. This would necessitate more efficient design procedures and protocols for mixtures produced with high RAP contents to compensate for their lack of long-term performance.


2015 ◽  
Vol 84 ◽  
pp. 277-283 ◽  
Author(s):  
Mulian Zheng ◽  
Juanlan Zhou ◽  
Shujuan Wu ◽  
Haitao Yuan ◽  
Jiandang Meng

2020 ◽  
Vol 9 (1) ◽  
pp. 20200026
Author(s):  
Shujuan Wu ◽  
Mulian Zheng ◽  
Qing Liu ◽  
Wen Zhou ◽  
Yifeng Li ◽  
...  

Author(s):  
Yuan Zhang ◽  
Daniel Swiertz ◽  
Hussain U. Bahia

The purpose of this study is to assess the use of blended binder tests to estimate mixture performance properties of high reclaimed asphalt pavement (RAP)/recycled asphalt shingles (RAS) mixtures utilizing recycling agents as a means to evaluate different recycling agents and estimate their doses for a given mixture. Blended binder properties are measured by using standard performance grading (PG) and PG+ test methods and correlating the results with corresponding performance properties of mixtures. Blended binders consisting of virgin and recovered binders and recycling agents were prepared and tested for PG grading properties, multiple stress creep recovery grades, and linear amplitude sweep fatigue life after the rolling thin-film oven and pressure aging vessel aging. Mixtures were tested for rutting resistance and cracking resistance at intermediate temperature and at low temperatures after being subjected to short-term oven aging and long-term oven aging. The correlation between the blended binder properties and mixture performance properties is used to identify the binder test parameters that can be used to predict the long-term performance of high RAP/RAS mixtures and the effects of various recycling agents. Results generally indicate that use of direct testing of recovered binders with recycling agents is an effective means to estimate required initial dose for recycling agent, and testing actual blended binders can be used to predict mixture performance-related properties for the testing conditions used in this study.


2021 ◽  
Vol 14 (6) ◽  
pp. 697-707 ◽  
Author(s):  
Ling Yu ◽  
Lingyun You ◽  
Huaizhi Zhang ◽  
Siyu Jia ◽  
Yitong Zhang ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document