reclaimed asphalt pavement
Recently Published Documents


TOTAL DOCUMENTS

734
(FIVE YEARS 327)

H-INDEX

41
(FIVE YEARS 12)

2022 ◽  
Vol 177 ◽  
pp. 106014
Author(s):  
Moins Ben ◽  
Hernando David ◽  
Buyle Matthias ◽  
France Cyril ◽  
Wim Van den bergh ◽  
...  

2022 ◽  
Vol 13 (1) ◽  
pp. 231-249
Author(s):  
Eslam Deef-Allah ◽  
Magdy Abdelrahman

Reclaimed asphalt pavement (RAP) has been used in asphalt mixes for several years in the United States. However, the interactions between the RAP binder and the virgin asphalt binder (VAB) need further investigations. Thus, the main objective of this study was to explore the rheological and chemical properties of extracted asphalt binders (EABs) from plant, field, and lab mixes. The plant mixes were collected from behind the paver, reheated to the compaction temperature, and compacted in the lab. The field mixes were collected as cores within two weeks after the end of the construction process. The lab mixes were fabricated in the lab using the same materials used in the plant and field mixes. The mixes contained high asphalt binder replacement percentages by RAP, which were greater than 30%. The EABs were treated as rolling thin film oven aged VABs (RTFO AVABs). The rheological properties of EABs and RTFO AVABs were analyzed using temperature sweep, frequency sweep, and multiple stress creep recovery tests. Chemical investigations of EABs and RTFO AVABs were carried out using Fourier transform infrared spectroscopy and thermogravimetric analysis. The EABs from plant or lab mixes showed higher stiffnesses than EABs from field mixes. This occurred because of the extra heating that was implemented for the plant mixes before the compaction in the lab, which caused more interactions between the RAP binder and VABs. The fabrication mechanism, mixing and short-term aging processes, used in lab mixes caused more interactions between RAP binder and VABs than in the field mixes.


2022 ◽  
Vol 14 (1) ◽  
pp. 573
Author(s):  
Iran Rocha Segundo ◽  
Behzad Zahabizadeh ◽  
Salmon Landi ◽  
Orlando Lima ◽  
Cátia Afonso ◽  
...  

The sustainable development of our societies demands strong efforts on scientific and technological research while informing and educating students and the general population. Air pollution and road safety hazards constitute two main public health problems that are insufficiently addressed pedagogically. With this work, we aim to contribute to tackeling the problem by presenting the results of scientific research on the development of photocatalytic, superhydrophobic, and self-cleaning recycled asphalt mixtures to achieve an eco-social friendly and smart material able to mitigate socioenvironmental impacts. The functionalization of asphalt is implemented by spraying particles’ solutions over a conventional AC 10, then evaluated by dye degradation and wettability. Firstly, different particles’ solutions (with nano-TiO2 and/or micro-PTFE under water, ethyl alcohol, and dimethyl ketone) were sprayed to select the best solution (BS), which was composed of TiO2-PTFE (4 g/L each) in ethyl alcohol. Two successive spraying coatings (diluted epoxy resin and BS) were performed over conventional and recycled AC 10 (with reclaimed asphalt pavement and steel slags). Their efficiency decreases with the highest resin amounts. The best results were obtained with 0.25 g resin and BS. For the lowest resin amount, all mixtures achieved superhydrophobicity and performed similarly regarding wettability.


Sign in / Sign up

Export Citation Format

Share Document