Closure to “Surface Treatment of High-Strength Bolted Joints”

1969 ◽  
Vol 95 (8) ◽  
pp. 1768-1769
Author(s):  
Conrad P. Heins ◽  
Charles T. G. Looney
Keyword(s):  
Surface Treatment ◽  
High Strength ◽  
Bolted Joints

Exploration of novel faying surface treatment for high-strength frictional bolted joints to enhance its after-slip performance

2021 ◽  
Author(s):  
Hitoshi Moriyama ◽  
Ryo Sakura ◽  
Takashi Yamaguchi ◽  
Takai Toshikazu ◽  
Yuta Yamamoto
Keyword(s):  
Surface Treatment ◽  
Load Transfer ◽  
High Strength ◽  
Bolted Joints ◽  
Deformation Capacity ◽  
Slip Coefficient ◽  
Faying Surface ◽  
Treatment Concepts ◽  
Local Slip

<p>Welded joints is adopted rather than bolted joints for megastructure’s connections because the former can carry large force. However, the former has several problems, such as quality control of welding in situ, which the latter can solve. By contrast, as the load transfer ratio of each bolt becomes uneven proportionally to the number of bolts, local slip around extreme bolts occurs before the whole slip. Extreme bolts to which a large shear force is applied will break before other bolts. For utilizing the strength of all bolts, the problem is solved by improving shear deformation capacity in faying surface with novel surface treatment. Here, the treatment concepts were explored, and the coating’s effectiveness was evaluated through friction tests. The deformation capacity can be twice or more than that of conventional treatment, and the slip coefficient doesn’t depend on contact pressure. These features have the advantage to give stable slip behaviour.</p>

Surface Treatment of High-Strength Bolted Joints

1968 ◽  
Vol 94 (3) ◽  
pp. 671-681
Author(s):  
George C. Brookhart ◽  
Iqtidar H. Siddiqi ◽  
Desi D. Vasarhelyi
Keyword(s):  
Surface Treatment ◽  
High Strength ◽  
Bolted Joints

PYROTOOL A

Alloy Digest ◽  
1971 ◽  
Vol 20 (4) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Good Ductility ◽  
Extrusion Dies ◽  
Temperature Performance

Abstract PYROTOOL A has been designed to display high strength and good ductility at temperatures up to 1200 F. It is used for high-temperature tooling, extrusion dies, liners, dummy blocks, forging dies, mandrels, holders, etc. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Fe-47. Producer or source: Carpenter.

ALCOA 6061 COLD FINISHED BAR

Alloy Digest ◽  
1998 ◽  
Vol 47 (6) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
High Resistance ◽  
High Strength ◽  
Wire Rod ◽  
Good Workability

Abstract Alcoa 6061 alloy has excellent joining characteristics and good acceptance of applied coatings. It combines relatively high strength, good workability, and high resistance to corrosion. The alloy is widely available. The T8 and T9 tempers offer better chipping characteristics than the T6 temper. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on corrosion resistance as well as machining and surface treatment. Filing Code: AL-349. Producer or source: ALCOA Wire, Rod & Bar Division.

DELTALLOY 4032

Alloy Digest ◽  
1998 ◽  
Vol 47 (4) ◽  
Keyword(s):  
Wear Resistance ◽  
Thermal Expansion ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Surface Finish ◽  
Coefficient Of Thermal Expansion ◽  
Single Point ◽  
High Strength ◽  
Corrosion And Wear

Abstract Deltalloy 4032 has good machinability and drilling characteristics when using single-point or multispindle screw machines and an excellent surface finish using polycrystalline or carbide tooling. The alloy demonstrates superior wear resistance and may eliminate the need for hard coat anodizing. Deltalloy 4032 is characterized by high strength and a low coefficient of thermal expansion. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on corrosion and wear resistance as well as machining and surface treatment. Filing Code: AL-347. Producer or source: ALCOA Wire, Rod & Bar Division.

ALCOA 2024

Alloy Digest ◽  
1998 ◽  
Vol 47 (3) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Surface Finish ◽  
High Strength ◽  
Machined Surface ◽  
2024 Alloy ◽  
Structural Applications ◽  
Strength Material

Abstract Alcoa 2024 alloy has good machinability and machined surface finish capability, and is a high-strength material of adequate workability. It has largely superseded alloy 2017 (see Alloy Digest Al-58, August 1974) for structural applications. The alloy has comparable strength to some mild steels. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on corrosion resistance as well as machining and surface treatment. Filing Code: AL-346. Producer or source: ALCOA Wire, Rod & Bar Division.

DURANICKEL ALLOY 301

Alloy Digest ◽  
1963 ◽  
Vol 12 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Heat Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
High Strength ◽  
Heat Treating ◽  
International Nickel Company ◽  
Temperature Performance

Abstract DURANICKEL Alloy 301 is a wrought, age-hardenable nickel alloy having high strength, high corrosion and heat resistance. It is recommended for springs, diaphrams, bearings, pump and valve parts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-83. Producer or source: The International Nickel Company Inc..

UDIMET 520

Alloy Digest ◽  
1962 ◽  
Vol 11 (9) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Elevated Temperatures ◽  
Base Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Nickel Base Alloy ◽  
Nickel Base

Abstract UDIMET 520 is a nickel-base alloy recommended for applications where high strength at elevated temperatures is required. It is suitable for service at temperatures up to 1800 F. This datasheet provides information on composition, physical properties, and tensile properties as well as creep. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-74. Producer or source: Special Metals Inc..

BRIMCOLLOY

Alloy Digest ◽  
1971 ◽  
Vol 20 (1) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
High Corrosion Resistance ◽  
Rolling Mills ◽  
High Corrosion ◽  
Copper Zinc

Abstract BRIMCOLLOY is a copper-zinc tin alloy having high strength, spring temper, superior conductivity and high corrosion resistance. It is produced in three grades: BRIMCOLLOY 100, BRIMCOLLOY 200, and BRIMCOLLOY 300. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Cu-225. Producer or source: Bridgeport Rolling Mills Company.

Sign in / Sign up

Export Citation Format

Share Document