Numerical Study of Oscillatory Natural Convection During Solidification of a Liquid Metal in a Rectangular Enclosure with and without Magnetic Field

2008 ◽  
Vol 54 (3) ◽  
pp. 331-348 ◽  
Author(s):  
Rachid Bessaïh ◽  
Saïd Bouabdallah
2010 ◽  
Vol 14 (2) ◽  
pp. 341-352 ◽  
Author(s):  
Lioua Kolsi ◽  
Awatef Abidi ◽  
Naceur Borjini ◽  
Ben Aïssia

A 3-D original numerical study of entropy generation in the case of liquid metal laminar natural convection in a differentially heated cubic cavity and in the presence of an external magnetic field orthogonal to the isothermal walls is carried out. The effect of this field on the various types of irreversibilities is analyzed. It was observed that in the presence of a magnetic field the generated entropy is distributed on the entire cavity and that the magnetic field limits the 3-D character of the distribution of the generated entropy.


2016 ◽  
Vol 138 (9) ◽  
Author(s):  
Amin Bouraoui ◽  
Rachid Bessaïh

In this paper, a numerical study of three-dimensional (3D) natural convection air-cooling of two identical heat sources, simulating electronic components, mounted in a rectangular enclosure was carried out. The governing equations were solved by using the finite-volume method based on the SIMPLER algorithm. The effects of Rayleigh number Ra, spacing between heat sources d, and aspect ratios Ax in x-direction (horizontal) and Az in z-direction (transversal) of the enclosure on heat transfer were investigated. In steady state, when d is increased, the heat transfer is more important than when the aspect ratios Ax and Az are reduced. In oscillatory state, the critical Rayleigh numbers Racr for different values of spacing between heat sources and their aspect ratios, at which the flow becomes time dependent, were obtained. Results show a strong relation between heat transfers, buoyant flow, and boundary layer. In addition, the heat transfer is more important at the edge of each face of heat sources than at the center region.


2011 ◽  
Vol 674 ◽  
pp. 132-162 ◽  
Author(s):  
C. MISTRANGELO

A numerical study has been carried out to analyse liquid metal flows in a sudden expansion of electrically conducting rectangular ducts under the influence of an imposed uniform magnetic field. Separation phenomena are investigated by selecting a reference Reynolds number and by increasing progressively the applied magnetic field. The magnetic effects leading to the reduction of the size of separation zones that form behind the cross-section enlargement are studied by considering modifications of flow topology, streamline patterns and electric current density distribution. In the range of parameters investigated, the magnetohydrodynamic flow undergoes substantial transitions from a hydrodynamic-like flow to one dominated by electromagnetic forces, where the influence of inertia and viscous forces is confined to thin internal layers aligned with the magnetic field and to boundary layers that form along the walls. Scaling laws describing the reattachment length and the pressure drop in the sudden expansion are derived for intense magnetic fields.


Sign in / Sign up

Export Citation Format

Share Document