scholarly journals The Yeast Spindle Pole Body Component Spc72p Interacts with Stu2p and Is Required for Proper Microtubule Assembly

1998 ◽  
Vol 141 (5) ◽  
pp. 1169-1179 ◽  
Author(s):  
Xiaoyue Peter Chen ◽  
Hongwei Yin ◽  
Tim C. Huffaker
Keyword(s):  
Chromosome Segregation ◽  
Spindle Pole Body ◽  
Spindle Pole ◽  
Microtubule Assembly ◽  
Temperature Sensitive ◽  
Pole Body ◽  
Cytoplasmic Microtubules ◽  
Spindle Elongation

We have previously shown that Stu2p is a microtubule-binding protein and a component of the Saccharomyces cerevisiae spindle pole body (SPB). Here we report the identification of Spc72p, a protein that interacts with Stu2p. Stu2p and Spc72p associate in the two-hybrid system and can be coimmunoprecipitated from yeast extracts. Stu2p and Spc72p also interact with themselves, suggesting the possibility of a multimeric Stu2p-Spc72p complex. Spc72p is an essential component of the SPB and is able to associate with a preexisting SPB, indicating that there is a dynamic exchange between soluble and SPB forms of Spc72p. Unlike Stu2p, Spc72p does not bind microtubules in vitro, and was not observed to localize along microtubules in vivo. A temperature-sensitive spc72 mutation causes defects in SPB morphology. In addition, most spc72 mutant cells lack cytoplasmic microtubules; the few cytoplasmic microtubules that are observed are excessively long, and some of these are unattached to the SPB. spc72 cells are able to duplicate and separate their SPBs to form a bipolar spindle, but spindle elongation and chromosome segregation rarely occur. The chromosome segregation block does not arrest the cell cycle; instead, spc72 cells undergo cytokinesis, producing aploid cells and polyploid cells that contain multiple SPBs.

scholarly journals A microtubule polymerase cooperates with the kinesin-6 motor and a microtubule cross-linker to promote bipolar spindle assembly in the absence of kinesin-5 and kinesin-14 in fission yeast

2017 ◽  
Vol 28 (25) ◽  
pp. 3647-3659 ◽  
Author(s):  
Masashi Yukawa ◽  
Tomoki Kawakami ◽  
Masaki Okazaki ◽  
Kazunori Kume ◽  
Ngang Heok Tang ◽  
...  
Keyword(s):  
Fission Yeast ◽  
Chromosome Segregation ◽  
Spindle Pole Body ◽  
Spindle Assembly ◽  
Spindle Pole ◽  
Temperature Sensitive ◽  
Bipolar Spindle ◽  
Pole Body ◽  
Cross Linker ◽  
Spindle Elongation

Accurate chromosome segregation relies on the bipolar mitotic spindle. In many eukaryotes, spindle formation is driven by the plus-end–directed motor kinesin-5 that generates outward force to establish spindle bipolarity. Its inhibition leads to the emergence of monopolar spindles with mitotic arrest. Intriguingly, simultaneous inactivation of the minus-end–directed motor kinesin-14 restores spindle bipolarity in many systems. Here we show that in fission yeast, three independent pathways contribute to spindle bipolarity in the absence of kinesin-5/Cut7 and kinesin-14/Pkl1. One is kinesin-6/Klp9 that engages with spindle elongation once short bipolar spindles assemble. Klp9 also ensures the medial positioning of anaphase spindles to prevent unequal chromosome segregation. Another is the Alp7/TACC-Alp14/TOG microtubule polymerase complex. Temperature-sensitive alp7cut7pkl1 mutants are arrested with either monopolar or very short spindles. Forced targeting of Alp14 to the spindle pole body is sufficient to render alp7cut7pkl1 triply deleted cells viable and promote spindle assembly, indicating that Alp14-mediated microtubule polymerization from the nuclear face of the spindle pole body could generate outward force in place of Cut7 during early mitosis. The third pathway involves the Ase1/PRC1 microtubule cross-linker that stabilizes antiparallel microtubules. Our study, therefore, unveils multifaceted interplay among kinesin-dependent and -independent pathways leading to mitotic bipolar spindle assembly.

scholarly journals The microtubule polymerase Stu2 promotes oligomerization of the γ-TuSC for cytoplasmic microtubule nucleation

eLife ◽  
2018 ◽  
Vol 7 ◽  
Author(s):  
Judith Gunzelmann ◽  
Diana Rüthnick ◽  
Tien-chen Lin ◽  
Wanlu Zhang ◽  
Annett Neuner ◽  
...  
Keyword(s):  
Budding Yeast ◽  
Spindle Pole Body ◽  
Family Members ◽  
Spindle Pole ◽  
Microtubule Nucleation ◽  
Cytoplasmic Microtubule ◽  
Pole Body ◽  
Cytoplasmic Microtubules

Stu2/XMAP215/ZYG-9/Dis1/Alp14/Msps/ch-TOG family members in association with with γ-tubulin complexes nucleate microtubules, but we know little about the interplay of these nucleation factors. Here, we show that the budding yeast Stu2 in complex with the γ-tubulin receptor Spc72 nucleates microtubules in vitro without the small γ-tubulin complex (γ-TuSC). Upon γ-TuSC addition, Stu2 facilitates Spc72–γ-TuSC interaction by binding to Spc72 and γ-TuSC. Stu2 together with Spc72–γ-TuSC increases microtubule nucleation in a process that is dependent on the TOG domains of Stu2. Importantly, these activities are also important for microtubule nucleation in vivo. Stu2 stabilizes Spc72–γ-TuSC at the minus end of cytoplasmic microtubules (cMTs) and an in vivo assay indicates that cMT nucleation requires the TOG domains of Stu2. Upon γ-tubulin depletion, we observed efficient cMT nucleation away from the spindle pole body (SPB), which was dependent on Stu2. Thus, γ-TuSC restricts cMT assembly to the SPB whereas Stu2 nucleates cMTs together with γ-TuSC and stabilizes γ-TuSC at the cMT minus end.

scholarly journals NDC10: a gene involved in chromosome segregation in Saccharomyces cerevisiae.

1993 ◽  
Vol 121 (3) ◽  
pp. 503-512 ◽  
Author(s):  
P Y Goh ◽  
J V Kilmartin
Keyword(s):  
Chromosome Segregation ◽  
Staining Pattern ◽  
Essential Gene ◽  
Spindle Pole Body ◽  
Spindle Pole ◽  
Polyploid Cell ◽  
Temperature Sensitive ◽  
Sensitive Mutant ◽  
Pole Body

A mutant, ndc10-1, was isolated by anti-tubulin staining of temperature-sensitive mutant banks of budding yeast. ndc10-1 has a defect chromosome segregation since chromosomes remains at one pole of the anaphase spindle. This produces one polyploid cell and one aploid cell, each containing a spindle pole body (SPD. NDC10 was cloned and sequenced and is identical to CBF2 (Jiang, W., J. Lechnermn and J. Carbon. 1993. J. Cell Biol. 121:513) which is the 110-kD component of a centromere DNA binding complex (Lechner, J., and J. Carbon. 1991. Cell. 61:717-725). NDC10 is an essential gene. Antibodies to Ndc10p labeled the SPB region in nearly all the cells examined including nonmitotic cells. In some cells with short spindles which may be in metaphase, staining was also observed along the spindle. The staining pattern and the phenotype of ndc10-1 are consistent with Cbf2p/Ndc10p being a kinetochore protein, and provide in vivo evidence for its role in the attachment of chromosomes to the spindle.

scholarly journals Constitutive dynein activity inshe1mutants reveals differences in microtubule attachment at the yeast spindle pole body

2012 ◽  
Vol 23 (12) ◽  
pp. 2319-2326 ◽  
Author(s):  
Zane J. Bergman ◽  
Xue Xia ◽  
I. Alexandra Amaro ◽  
Tim C. Huffaker
Keyword(s):  
Spindle Pole Body ◽  
Spindle Pole ◽  
Microtubule Assembly ◽  
Microtubule Organizing Center ◽  
Microtubule Attachment ◽  
Pole Body ◽  
Organizing Center ◽  
Cytoplasmic Microtubules ◽  
G1 Cells

The organization of microtubules is determined in most cells by a microtubule-organizing center, which nucleates microtubule assembly and anchors their minus ends. In Saccharomyces cerevisiae cells lacking She1, cytoplasmic microtubules detach from the spindle pole body at high rates. Increased rates of detachment depend on dynein activity, supporting previous evidence that She1 inhibits dynein. Detachment rates are higher in G1 than in metaphase cells, and we show that this is primarily due to differences in the strengths of microtubule attachment to the spindle pole body during these stages of the cell cycle. The minus ends of detached microtubules are stabilized by the presence of γ-tubulin and Spc72, a protein that tethers the γ-tubulin complex to the spindle pole body. A Spc72–Kar1 fusion protein suppresses detachment in G1 cells, indicating that the interaction between these two proteins is critical to microtubule anchoring. Overexpression of She1 inhibits the loading of dynactin components, but not dynein, onto microtubule plus ends. In addition, She1 binds directly to microtubules in vitro, so it may compete with dynactin for access to microtubules. Overall, these results indicate that inhibition of dynein activity by She1 is important to prevent excessive detachment of cytoplasmic microtubules, particularly in G1 cells.

scholarly journals BIK1, a protein required for microtubule function during mating and mitosis in Saccharomyces cerevisiae, colocalizes with tubulin.

1990 ◽  
Vol 111 (6) ◽  
pp. 2573-2586 ◽  
Author(s):  
V Berlin ◽  
C A Styles ◽  
G R Fink
Keyword(s):  
Synthetic Lethality ◽  
Nuclear Fusion ◽  
Spindle Pole Body ◽  
Spindle Pole ◽  
Microtubule Assembly ◽  
Chromosome Loss ◽  
Physical Interaction ◽  
Pole Body ◽  
Cytoplasmic Microtubules ◽  
And Function

BIK1 function is required for nuclear fusion, chromosome disjunction, and nuclear segregation during mitosis. The BIK1 protein colocalizes with tubulin to the spindle pole body and mitotic spindle. Synthetic lethality observed in double mutant strains containing a mutation in the BIK1 gene and in the gene for alpha- or beta-tubulin is consistent with a physical interaction between BIK1 and tubulin. Furthermore, over- or underexpression of BIK1 causes aberrant microtubule assembly and function, bik1 null mutants are viable but contain very short or undetectable cytoplasmic microtubules. Spindle formation often occurs strictly within the mother cell, probably accounting for the many multinucleate and anucleate bik1 cells. Elevated levels of chromosome loss in bik1 cells are indicative of defective spindle function. Nuclear fusion is blocked in bik1 x bik1 zygotes, which have truncated cytoplasmic microtubules. Cells overexpressing BIK1 initially have abnormally short or nonexistent spindle microtubules and long cytoplasmic microtubules. Subsequently, cells lose all microtubule structures, coincident with the arrest of division. Based on these results, we propose that BIK1 is required stoichiometrically for the formation or stabilization of microtubules during mitosis and for spindle pole body fusion during conjugation.

scholarly journals The yeast protein kinase Mps1p is required for assembly of the integral spindle pole body component Spc42p

2002 ◽  
Vol 156 (3) ◽  
pp. 453-465 ◽  
Author(s):  
Andrea R. Castillo ◽  
Janet B. Meehl ◽  
Garry Morgan ◽  
Amy Schutz-Geschwender ◽  
Mark Winey
Keyword(s):  
Protein Kinase ◽  
Spindle Pole Body ◽  
Spindle Checkpoint ◽  
Spindle Pole ◽  
Physical Interaction ◽  
Gene Encoding ◽  
Pole Body ◽  
Conditional Allele

Saccharomyces cerevisiae MPS1 encodes an essential protein kinase that has roles in spindle pole body (SPB) duplication and the spindle checkpoint. Previously characterized MPS1 mutants fail in both functions, leading to aberrant DNA segregation with lethal consequences. Here, we report the identification of a unique conditional allele, mps1–8, that is defective in SPB duplication but not the spindle checkpoint. The mutations in mps1-8 are in the noncatalytic region of MPS1, and analysis of the mutant protein indicates that Mps1-8p has wild-type kinase activity in vitro. A screen for dosage suppressors of the mps1-8 conditional growth phenotype identified the gene encoding the integral SPB component SPC42. Additional analysis revealed that mps1-8 exhibits synthetic growth defects when combined with certain mutant alleles of SPC42. An epitope-tagged version of Mps1p (Mps1p-myc) localizes to SPBs and kinetochores by immunofluorescence microscopy and immuno-EM analysis. This is consistent with the physical interaction we detect between Mps1p and Spc42p by coimmunoprecipitation. Spc42p is a substrate for Mps1p phosphorylation in vitro, and Spc42p phosphorylation is dependent on Mps1p in vivo. Finally, Spc42p assembly is abnormal in a mps1-1 mutant strain. We conclude that Mps1p regulates assembly of the integral SPB component Spc42p during SPB duplication.

scholarly journals Mps3p is a novel component of the yeast spindle pole body that interacts with the yeast centrin homologue Cdc31p

2002 ◽  
Vol 159 (6) ◽  
pp. 945-956 ◽  
Author(s):  
Sue L. Jaspersen ◽  
Thomas H. Giddings ◽  
Mark Winey
Keyword(s):  
Mitotic Spindle ◽  
Spindle Pole Body ◽  
Integral Membrane Protein ◽  
Spindle Pole ◽  
Temperature Sensitive ◽  
Nonpermissive Temperature ◽  
Reading Frame ◽  
Pole Body ◽  
Monopolar Spindle

Accurate duplication of the Saccharomyces cerevisiae spindle pole body (SPB) is required for formation of a bipolar mitotic spindle. We identified mutants in SPB assembly by screening a temperature-sensitive collection of yeast for defects in SPB incorporation of a fluorescently marked integral SPB component, Spc42p. One SPB assembly mutant contained a mutation in a previously uncharacterized open reading frame that we call MPS3 (for monopolar spindle). mps3-1 mutants arrest in mitosis with monopolar spindles at the nonpermissive temperature, suggesting a defect in SPB duplication. Execution point experiments revealed that MPS3 function is required for the first step of SPB duplication in G1. Like cells containing mutations in two other genes required for this step of SPB duplication (CDC31 and KAR1), mps3-1 mutants arrest with a single unduplicated SPB that lacks an associated half-bridge. MPS3 encodes an essential integral membrane protein that localizes to the SPB half-bridge. Genetic interactions between MPS3 and CDC31 and binding of Cdc31p to Mps3p in vitro, as well as the fact that Cdc31p localization to the SPB is partially dependent on Mps3p function, suggest that one function for Mps3p during SPB duplication is to recruit Cdc31p, the yeast centrin homologue, to the half-bridge.

scholarly journals Novel Phosphorylation States of the Yeast Spindle Pole Body

2018 ◽  
Author(s):  
Kimberly K. Fong ◽  
Alex Zelter ◽  
Beth Graczyk ◽  
Jill M. Hoyt ◽  
Michael Riffle ◽  
...  
Keyword(s):  
Cell Cycle ◽  
Spindle Pole Body ◽  
Mitotic Checkpoint ◽  
Spindle Pole ◽  
Temperature Sensitive ◽  
Phosphorylation Sites ◽  
Microtubule Nucleation ◽  
Data Set ◽  
Pole Body

ABSTRACTPhosphorylation regulates yeast spindle pole body (SPB) duplication and separation and likely regulates microtubule nucleation. We report a phosphoproteomic analysis using tandem mass spectrometry of purifiedSaccharomyces cerevisiaeSPBs for two cell cycle arrests, G1/S and the mitotic checkpoint, expanding on previously reported phosphoproteomic data sets. We present a novel phosphoproteomic state of SPBs arrested in G1/S by acdc4-1temperature sensitive mutation, with particular interest in phosphorylation events on the γ-tubulin small complex (γ-TuSC). Thecdc4-1arrest is the earliest arrest at which microtubule nucleation has occurred at the newly duplicated SPB. Several novel phosphorylation sites were identified in G1/S and during mitosis on the microtubule nucleating γ-TuSC. These sites were analyzedin vivoby fluorescence microscopy and were shown to be required for proper regulation of spindle length. Additionally,in vivoanalysis of two mitotic sites in Spc97 found that phosphorylation of at least one of these sites is required for progression through the cell cycle. This phosphoproteomic data set not only broadens the scope of the phosphoproteome of SPBs, it also identifies several γ-TuSC phosphorylation sites influencing microtubule regulation.

scholarly journals Requirement for the Budding Yeast Polo Kinase Cdc5 in Proper Microtubule Growth and Dynamics

2008 ◽  
Vol 7 (3) ◽  
pp. 444-453 ◽  
Author(s):  
Chong J. Park ◽  
Jung-Eun Park ◽  
Tatiana S. Karpova ◽  
Nak-Kyun Soung ◽  
Li-Rong Yu ◽  
...  
Keyword(s):  
Budding Yeast ◽  
Spindle Pole Body ◽  
Spindle Pole ◽  
Growth Defect ◽  
Temperature Sensitive ◽  
Independent Manner ◽  
Polo Kinase ◽  
Early Anaphase

ABSTRACT In many organisms, polo kinases appear to play multiple roles during M-phase progression. To provide new insights into the function of the budding yeast polo kinase Cdc5, we generated novel temperature-sensitive cdc5 mutants by mutagenizing the C-terminal noncatalytic polo box domain, a region that is critical for proper subcellular localization. One of these mutants, cdc5-11, exhibited a temperature-sensitive growth defect with an abnormal spindle morphology. Strikingly, provision of a moderate level of benomyl, a microtubule-depolymerizing drug, permitted cdc5-11 cells to grow significantly better than the isogenic CDC5 wild type in a FEAR (cdc Fourteen Early Anaphase Release)-independent manner. In addition, cdc5-11 required MAD2 for both cell growth and the benomyl-remedial phenotype. These results suggest that cdc5-11 is defective in proper spindle function. Consistent with this view, cdc5-11 exhibited abnormal spindle morphology, shorter spindle length, and delayed microtubule regrowth at the nonpermissive temperature. Overexpression of CDC5 moderately rescued the spc98-2 growth defect. Interestingly, both Cdc28 and Cdc5 were required for the proper modification of the spindle pole body components Nud1, Slk19, and Stu2 in vivo. They also phosphorylated these three proteins in vitro. Taken together, these observations suggest that concerted action of Cdc28 and Cdc5 on Nud1, Slk19, and Stu2 is important for proper spindle functions.

scholarly journals The Yeast Centrin, Cdc31p, and the Interacting Protein Kinase, Kic1p, Are Required for Cell Integrity

1998 ◽  
Vol 143 (3) ◽  
pp. 751-765 ◽  
Author(s):  
Donald S. Sullivan ◽  
Sue Biggins ◽  
Mark D. Rose
Keyword(s):  
Protein Kinase ◽  
Calcium Binding ◽  
Spindle Pole Body ◽  
Spindle Pole ◽  
Permissive Temperature ◽  
Cell Integrity ◽  
Interacting Protein ◽  
Pole Body

Cdc31p is the yeast homologue of centrin, a highly conserved calcium-binding protein of the calmodulin superfamily. Previously centrins have been implicated only in microtubule-based processes. To elucidate the functions of yeast centrin, we carried out a two-hybrid screen for Cdc31p-interacting proteins and identified a novel essential protein kinase of 1,080 residues, Kic1p (kinase that interacts with Cdc31p). Kic1p is closely related to S. cerevisiae Ste20p and the p-21– activated kinases (PAKs) found in a wide variety of eukaryotic organisms. Cdc31p physically interacts with Kic1p by two criteria; Cdc31p coprecipitated with GST–Kic1p and it bound to GST–Kic1p in gel overlay assays. Furthermore, GST–Kic1p exhibited in vitro kinase activity that was CDC31-dependent. Although kic1 mutants were not defective for spindle pole body duplication, they exhibited a variety of mutant phenotypes demonstrating that Kic1p is required for cell integrity. We also found that cdc31 mutants, previously identified as defective for spindle pole body duplication, exhibited lysis and morphological defects. The cdc31 kic1 double mutants exhibited a drastic reduction in the range of permissive temperature, resulting in a severe lysis defect. We conclude that Kic1p function is dependent upon Cdc31p both in vivo and in vitro. We postulate that Cdc31p is required both for SPB duplication and for cell integrity/morphogenesis, and that the integrity/morphogenesis function is mediated through the Kic1p protein kinase.

Sign in / Sign up

Export Citation Format

Share Document