scholarly journals Study on Dimension of Landing Gear Bogie for Civil Aircraft

2019 ◽  
Vol 563 ◽  
pp. 042042
Author(s):  
Zhongjian Li ◽  
Tengfei Mu
Keyword(s):  
Landing Gear ◽  
Civil Aircraft

Metrological aspects of pre-flight anti-icing procedures for civil aircraft

2019 ◽  
pp. 22-26
Author(s):  
А. Богоявленский ◽  
A. Bogoyavlenskiy
Keyword(s):  
Negative Impact ◽  
Landing Gear ◽  
Flight Performance ◽  
Spray Nozzle ◽  
Subsequent Formation ◽  
Inlet Guide Vanes ◽  
Civil Aircraft ◽  
Engine Compressor ◽  
Temperature And Pressure ◽  
Instrumental Control

Snow-ice deposits formed on the outer surfaces of aircrafts on the ground during parking can have a negative impact during take-off due to the deterioration of aerodynamic and flight performance, a significant and even critical decrease in lift, increased drag, blocking controls, difficulty or blocking of landing gear retraction, damage to the blades of inlet guide vanes and/or the blades of an engine compressor. To exclude the influence of snow and ice deposits, anti-icing treatment is performed, including their removal and/or protection from subsequent formation. For this purpose, special anti-icing machines (deicers), equipped with such means of instrumental control as counters of anti-icing fluid pumps, measuring scales of anti-icing fluid tanks, thermometers and pressure gauges for temperature and pressure measuring at the outlet of a spray nozzle, are used. The article deals with the metrological aspects of civil aircrafts anti-icing prior to flight.

scholarly journals High-fidelity simulations of unsteady civil aircraft aerodynamics: stakes and perspectives. Application of zonal detached eddy simulation

2014 ◽  
Vol 372 (2022) ◽  
pp. 20130325 ◽  
Author(s):  
Sébastien Deck ◽  
Fabien Gand ◽  
Vincent Brunet ◽  
Saloua Ben Khelil
Keyword(s):  
Turbulent Flows ◽  
Hybrid Methods ◽  
Landing Gear ◽  
High Fidelity ◽  
Detached Eddy Simulation ◽  
High Lift ◽  
Eddy Simulation ◽  
Civil Aircraft ◽  
Aircraft Aerodynamics ◽  
Transonic Buffet

This paper provides an up-to-date survey of the use of zonal detached eddy simulations (ZDES) for unsteady civil aircraft applications as a reflection on the stakes and perspectives of the use of hybrid methods in the framework of industrial aerodynamics. The issue of zonal or non-zonal treatment of turbulent flows for engineering applications is discussed. The ZDES method used in this article and based on a fluid problem-dependent zonalization is briefly presented. Some recent landmark achievements for conditions all over the flight envelope are presented, including low-speed (aeroacoustics of high-lift devices and landing gear), cruising (engine–airframe interactions), propulsive jets and off-design (transonic buffet and dive manoeuvres) applications. The implications of such results and remaining challenges in a more global framework are further discussed.

Fatigue fracture of a main landing gear swinging lever in a civil aircraft

2008 ◽  
Vol 15 (6) ◽  
pp. 755-765 ◽  
Author(s):  
F. Bagnoli ◽  
F. Dolce ◽  
M. Colavita ◽  
M. Bernabei
Keyword(s):  
Fatigue Fracture ◽  
Landing Gear ◽  
Civil Aircraft

Metrological aspects of pre-flight anti-icing procedures for civil aircraft

2019 ◽  
pp. 26-31
Author(s):  
А. Богоявленский ◽  
A. Bogoyavlenskiy
Keyword(s):  
Negative Impact ◽  
Landing Gear ◽  
Flight Performance ◽  
Spray Nozzle ◽  
Subsequent Formation ◽  
Inlet Guide Vanes ◽  
Civil Aircraft ◽  
Engine Compressor ◽  
Temperature And Pressure ◽  
Instrumental Control

Snow-ice deposits formed on the outer surfaces of aircrafts on the ground during parking can have a negative impact during take-off due to the deterioration of aerodynamic and flight performance, a significant and even critical decrease in lift, increased drag, blocking controls, difficulty or blocking of landing gear retraction, damage to the blades of inlet guide vanes and/or the blades of an engine compressor. To exclude the influence of snow and ice deposits, anti-icing treatment is performed, including their removal and/or protection from subsequent formation. For this purpose, special anti-icing machines (deicers), equipped with such means of instrumental control as counters of anti-icing fluid pumps, measuring scales of anti-icing fluid tanks, thermometers and pressure gauges for temperature and pressure measuring at the outlet of a spray nozzle, are used. The article deals with the metrological aspects of civil aircrafts anti-icing prior to flight.

Sign in / Sign up

Export Citation Format

Share Document