scholarly journals Personal Exposure to Inhalable Dust and the Specific Latex Aero-Allergen, Hev b6.02, in Latex Glove Manufacturing in Thailand

2011 ◽  
Vol 64 (5) ◽  
pp. 1073-1080 ◽  
Author(s):  
O. Schlosser ◽  
A. Huyard ◽  
V. Catalán

The objective of this study was to assess workers' exposure to bioaerosols in sludge drying units. Simultaneous collection of inhalable dust and airborne biological agents was carried out using rotating cup samplers (CIP 10, Arelco). Sixteen stationary and 30 personal measurements were performed in three drying plants, during summer and winter. Microbial content of air was characterized by high amounts of Gram-negative bacteria, endotoxin, and thermophilic actinomycetes. High differences between exposure levels were observed with regard to workplaces and tasks. Dryers and conveyors in operation were closed, and the monitoring task in the dryer room was associated with low levels of personal exposure, close to background levels. Conversely, cleaning and maintenance of the dryer and conveyors required the equipment to be opened, giving significantly higher task-based personal exposure levels. The fall of dried sludge into indoor containers resulted in high emission and spreading of dust. Mean personal exposure levels to fungi were moderate or low for all tasks. Based on the results of this study, appropriate means of operational control and personal protection are being developed and implemented on sites.


2013 ◽  
Vol 70 (Suppl 1) ◽  
pp. A108.3-A109
Author(s):  
I Basinas ◽  
Sigsgaard ◽  
Erlandsen ◽  
Kromhout ◽  
Heederik ◽  
...  

2009 ◽  
Vol 69 (9) ◽  
pp. 1306-1310
Author(s):  
Basile Chaix ◽  
Juan Merlo ◽  
David Evans ◽  
Cinira Leal ◽  
Sabrina Havard

2014 ◽  
Vol 13 (4) ◽  
pp. 282-289 ◽  
Author(s):  
Jong-dae Lee ◽  
◽  
Hee-jin Park ◽  
Hyunsoo Lee ◽  
Hee-kyung Jang ◽  
...  

2020 ◽  
Author(s):  
Gaurav Mahamuni ◽  
Jiayang He ◽  
Jay Rutherford ◽  
Byron Ockerman ◽  
Edmund Seto ◽  
...  

<p>Exposure to combustion generated aerosols such as PM from residential woodburning, forest fires, cigarette smoke, and traffic emission have been linked to adverse health outcomes. It is important to assess the chemical composition of PM to examine personal exposure. Excitation-emission matrix (EEM) spectroscopy has been shown as a sensitive and cost-effective technique for evaluation of combustion PM composition and as a source apportionment tool. However, EEM measurements are hindered by a solvent extraction step and a need for benchtop instrumentation. Here, we present a methodology that eliminates this labor-intensive sample preparation and allows to automate and miniaturize the detection platform. A miniature electrostatic collector deposits PM sample onto transparent polydimethylsiloxane (PDMS) coated substrate, where PAH components are extracted into solid-phase (SP) solvent and analyzed using EEM spectroscopy in-situ. We evaluated external and internal excitation schemes to optimized signal to noise ratio. Analysis of woodsmoke and cigarette smoke samples showed good agreement with liquid extraction EEM spectra. Internal excitation is hindered by fluorescent interference from PDMS at λ<250nm. The external excitation EEM spectra are dependent on the incident angle; ranges of 30-40⁰ and 55-65⁰ showed the best results. The proposed SP-EEM technique can be used for development of miniaturized sensors for chemical analysis of combustion generated PM. </p>


Sign in / Sign up

Export Citation Format

Share Document