Liquid Chromatographic Determination of Allopurinol in Tablets: Collaborative Study

1984 ◽  
Vol 67 (6) ◽  
pp. 1121-1122
Author(s):  
Donald Shostak ◽  
◽  
M P Uribe ◽  
T Poplawski ◽  
T S Savage ◽  
...  
Keyword(s):  
Collaborative Study ◽  
Internal Standard ◽  
Ammonium Phosphate ◽  
Chromatographic Determination ◽  
Reverse Phase ◽  
Liquid Chromatographic Method ◽  
Liquid Chromatographic Determination ◽  
The Mean ◽  
Liquid Chromatographic

Abstract A liquid chromatographic method for the determination of allopurinolin tablets was collaboratively studied by 7 laboratories. The methoduses a C,8 reverse phase column, a 0.05M ammonium phosphate mobilephase, hypoxanthine as the internal standard, and photometric detectionat 254 nm. Collaborators were supplied with samples of 2 commercialtablets and 1 synthetic tablet powder. The mean recovery value of allopurinol from the synthetic tablet powder was 100.0%. The combinedmean coefficient of variation for all 3 types of sample analyzedwas less than 2%. The method has been adopted official first action.

Liquid Chromatographic Determination of Diazepam in Tablets: Collaborative Study

1985 ◽  
Vol 68 (3) ◽  
pp. 545-546
Author(s):  
Michael Tsougros
Keyword(s):  
Collaborative Study ◽  
Internal Standard ◽  
Chromatographic Determination ◽  
Reverse Phase ◽  
Photometric Detection ◽  
Liquid Chromatographic Method ◽  
Liquid Chromatographic Determination ◽  
The Mean ◽  
Liquid Chromatographic

Abstract A stability indicating liquid chromatographic method for the determination of diazepam in tablets was collaboratively studied by 6 laboratories. The method uses a Cig reverse phase column, a methanolwater mobile phase, p-tolualdehyde as the internal standard, and photometric detection at 254 nm. The collaborators were supplied with a synthetic tablet powder and 3 commercial tablet samples. The mean recovery of diazepam from the synthetic tablet powder was 100.2%. For all samples analyzed, the coefficient of variation was < 1.5%. The method has been adopted official first action.

Liquid Chromatographic Determination of Propoxur in Technical and Formulated Products: Collaborative Study

1984 ◽  
Vol 67 (3) ◽  
pp. 497-499
Author(s):  
Stephen C Slahck ◽  
◽  
J B Audino ◽  
O O Bennett ◽  
B D Folsom ◽  
...  
Keyword(s):  
Chromatographic Method ◽  
Collaborative Study ◽  
Internal Standard ◽  
Chromatographic Determination ◽  
Reverse Phase ◽  
Liquid Chromatographic Method ◽  
Wettable Powder ◽  
Liquid Chromatographic Determination ◽  
Liquid Chromatographic

Abstract A liquid chromatographic method for the determination of propoxur in technical and formulated products has been subjected to a collaborative study with 8 participating collaborators. Formulations are extracted with acetonitrile and analyzed by reverse phase chromatography, with n-butyrophenone as an internal standard. Collaborators were furnished with samples of technical, 70% wettable powder, 1.5 emulsifiable, and 2% bait. Coefficient of variation values obtained on the 4 samples were 0.34, 0.68, 3.25, and 5.41%, respectively. The method has been adopted official first action.

Liquid Chromatographic Determination of Flucytosine in Capsules: Collaborative Study

1988 ◽  
Vol 71 (1) ◽  
pp. 33-35
Author(s):  
Donald Shostak ◽  
Clifford Klein ◽  
◽  
C Cappon ◽  
N Falcone ◽  
...  
Keyword(s):  
Collaborative Study ◽  
Internal Standard ◽  
Chromatographic Determination ◽  
Photometric Detection ◽  
Acid Sodium Salt ◽  
Liquid Chromatographic Method ◽  
Liquid Chromatographic Determination ◽  
The Mean ◽  
Liquid Chromatographic

Abstract A liquid chromatographic method for the determination of flucytosine in capsules was collaboratively studied by 7 laboratories. The method uses a C18 reverse phase column, water-methanol-acetic acid mobile phase containing 1-octanesulfonic acid sodium salt, p-aminobenzoic acid as internal standard, and photometric detection at 285 nm. The mean recovery value (±SD) of flucytosine from a synthetic formulation representing capsules was 99.2 ± 1.72% (CV = 1.73%). Composited samples of 250 and 500 mg commercial capsules gave assay values of (mean ± SD) 103.17 ± 2.21 and 99.29 ± 1.29% of declared, respectively. CV values were 2.15 and 1.30%. Reproducibility and repeatability CVs were 2.19 and 1.50%, respectively, for the 250 mg capsules, and 1.34 and 0.63%, respectively, for the 500 mg capsules. The method has been adopted official first action.

Liquid Chromatographic Determination of Methiocarb in Technical and Formulated Products: Collaborative Study

1984 ◽  
Vol 67 (3) ◽  
pp. 492-493
Author(s):  
Stephen C Slahck ◽  
◽  
A A Carlstrom ◽  
L T Chenery ◽  
N D Ellis ◽  
...  
Keyword(s):  
Coefficient Of Variation ◽  
Collaborative Study ◽  
Internal Standard ◽  
Chromatographic Determination ◽  
Reverse Phase ◽  
Reverse Phase Chromatography ◽  
Wettable Powder ◽  
Liquid Chromatographic Determination ◽  
Liquid Chromatographic

Abstract An LC method for the determination of methiocarb in methiocarb technical and formulated products has been subjected to a collaborative study with 9 participating collaborators. Formulations are extracted with acetonitrile and analyzed by reverse phase chromatography, with acetophenone as an internal standard. Collaborators were furnished samples of technical, 75% wettable powder, 75% seed treater, 75% concentrate, and 50% hopper box treater. Coefficient of variation values obtained on the 5 samples were 0.71, 0.83, 0.62, 1.57, and 0.82%, respectively. The method has been adopted official first action.

Liquid Chromatographic Determination of Carbofuran in Technical and Formulated Products: Collaborative Study

1986 ◽  
Vol 69 (5) ◽  
pp. 915-918
Author(s):  
Edward J Kikta ◽  
◽  
E Bane ◽  
A Burns ◽  
A Christensen ◽  
...  
Keyword(s):  
Mobile Phase ◽  
Collaborative Study ◽  
Internal Standard ◽  
Chromatographic Determination ◽  
Data Sets ◽  
Matched Pairs ◽  
Reverse Phase ◽  
Liquid Chromatographic Determination ◽  
Liquid Chromatographic

Abstract A liquid chromatographic (LC) method for the analysis of technical and formulated carbofuran samples was evaluated in a collaborative study. Carbofuran is determined by reverse phase LC, using a water-methanol mobile phase and acetophenone as internal standard, and detected at 280 nm. Twelve samples, 5 formulations and technical matched pairs, were analyzed by 17 collaborating laboratories. Accuracy and variability of results are typical of large LC data sets. The method has been adopted official first action.

Liquid Chromatographic Determination of Triadimefon in Technical and Formulated Products: Collaborative Study

1985 ◽  
Vol 68 (3) ◽  
pp. 586-589
Author(s):  
Stephen C Slahck
Keyword(s):  
Collaborative Study ◽  
Internal Standard ◽  
Chromatographic Determination ◽  
Normal Phase ◽  
Coefficients Of Variation ◽  
Liquid Chromatographic Method ◽  
Liquid Chromatographic Determination ◽  
Liquid Chromatographic ◽  
Technical Products

Abstract A liquid chromatographic method for the determination of triadimefon (Bayleton™) in triadimefon technical and formulated products has been developed and subjected to a collaborative study with 7 participating collaborators. Formulations were extracted with mobile solvent and analyzed by normal phase chromatography, with 4-chlorophenyl sulfoxide as an internal standard. Collaborators were furnished with standards and samples of technical products, 50% wettable powders, and 25% wettable powders for analysis. Coefficients of variation of the values obtained on these samples were 1.42, 0.82, and 1.05%, respectively. The method has been adopted official first action.

Liquid Chromatographic Determination of Bendiocarb in Technical Materials and Wettable Powder Formulations: Collaborative Study

1986 ◽  
Vol 69 (5) ◽  
pp. 908-911
Author(s):  
Peter L Carter ◽  
Keith C Overton ◽  
◽  
P G Baker ◽  
O O Bennett ◽  
...  
Keyword(s):  
Statistical Data ◽  
Collaborative Study ◽  
Internal Standard ◽  
Chromatographic Determination ◽  
Liquid Chromatograph ◽  
Coefficients Of Variation ◽  
Liquid Chromatographic Method ◽  
Liquid Chromatographic Determination ◽  
Liquid Chromatographic

Abstract A liquid chromatographic method for determination of bendiocarb in technical materials and wettable powders was tested by 12 collaborators. Bendiocarb is dissolved in acetonitrile containing 0.1% propiophenone as internal standard. This solution is analyzed on a liquid chromatograph utilizing a reverse phase (C18) column. The compound is detected at 254 nm and peak area is used for quantitation. The 3 different materials studied contained 20, 80, and nominally 100% bendiocarb. Each was examined in duplicate to provide the necessary matched pairs. Collaborators approved of the ease and simplicity of the method and, in particular, the way the method can be applied to automatic injection assemblies. The statistical data show acceptable precision of the method: Reproducibility coefficients of variation were 20% material, 2.04%; 80% material, 1.02%; and nominal 100% material (technical product), 0.64%. The method has been adopted official first action.

High Pressure Liquid Chromatographic Determination of Oxazepam Dosage Forms: Collaborative Study

1983 ◽  
Vol 66 (4) ◽  
pp. 864-866
Author(s):  
Eileen S Bargo ◽  
◽  
E Aranda ◽  
C Bonnin ◽  
S Hauser ◽  
...  
Keyword(s):  
High Pressure ◽  
Collaborative Study ◽  
Chromatographic Determination ◽  
Reverse Phase ◽  
High Pressure Liquid Chromatographic ◽  
Coefficients Of Variation ◽  
Liquid Chromatographic Method ◽  
Liquid Chromatographic Determination ◽  
Liquid Chromatographic

Abstract A reverse phase high pressure liquid chromatographic method for the determination of oxazepam in tablets and capsules was collaboratively studied by 9 laboratories. Collaborators were supplied with 6 samples that included synthetic and commercial formulations. Tablet and capsule composites are diluted with methanol and filtered. Oxazepam is determined at 254 nm by using a C18 column. Mean recoveries of oxazepam from synthetic tablet and capsule formulations were 97.2 and 99.0%, respectively. Mean coefficients of variation for tablets and capsules ranged from 1.85 to 2.86%. The method has been adopted official first action.

High Pressure Liquid Chromatographic Determination of Physostigmine Salicylate and Physostigmine Sulfate in Liquids and Ointments: Collaborative Study

1982 ◽  
Vol 65 (1) ◽  
pp. 132-137
Author(s):  
Norlin W Tymes ◽  
◽  
G Briguglio ◽  
C Corcoran ◽  
R Everett ◽  
...  
Keyword(s):  
High Pressure ◽  
Collaborative Study ◽  
Internal Standard ◽  
Pharmaceutical Formulations ◽  
Chromatographic Determination ◽  
Reverse Phase ◽  
High Pressure Liquid Chromatographic ◽  
Liquid Chromatographic Determination ◽  
Liquid Chromatographic

Abstract Results of 11 laboratories are presented for the collaborative study of a proposed method for the quantitative reverse phase high pressure liquid chromatographic (HPLC) determination of physostigmine salicylate and physostigmine sulfate in pharmaceutical formulations. The samples consisted of commercial solution, injection, and ointment preparations, each containing one of the physostigmine salts. The physostigmine salt is extracted from ointments with acetonitrile after the ointment is dissolved in hexane. Liquid preparations are diluted directly. Physostigmine is determined at 254 nm on a C18 column by comparison with a physostigmine standard. Flurazepam hydrochloride is the internal standard. The method has been adopted official first action for the solution dosage form.

Liquid Chromatographic Determination of Aminocarb in Technical and Formulated Products: Collaborative Study

1985 ◽  
Vol 68 (3) ◽  
pp. 567-569 ◽  
Author(s):  
Stephen C Slahck
Keyword(s):  
Collaborative Study ◽  
Internal Standard ◽  
Chromatographic Determination ◽  
Reverse Phase ◽  
Reverse Phase Chromatography ◽  
Coefficients Of Variation ◽  
Liquid Chromatographic Determination ◽  
Liquid Chromatographic

Abstract An LC method for determination of aminocarb (Matacil™) in aminocarb technical and formulated products has been developed and subjected to a collaborative study with 10 participating collaborators. Formulations are extracted with tetrahydrofuran-buffer (60 + 40) and analyzed by reverse phase chromatography, with n-butyrophenone as internal standard. Collaborators were furnished with standards and samples of technical and 180 oil flowable products for analysis. Coefficients of variation obtained on these samples were 0.72 and 1.7%, respectively. The method has been adopted official first action.

Sign in / Sign up

Export Citation Format

Share Document