scholarly journals Optimal dynamic control for a maglev vehicle moving on multi-span guideway girders

2021 ◽  
Vol 37 ◽  
pp. 373-379
Author(s):  
Linya Liu ◽  
J D Yau ◽  
Jialiang Qin ◽  
S Urushadze

Abstract An optimal control algorithm using a virtual tuned mass damper called virtual TMD to control the levitation force of a magnetic system is developed for resonance suppression of a maglev vehicle moving on multi-span guideway girders. Since the optimal dynamic parameters of a TMD in vibration control are well developed, the optimal tuning gains required to control the magnetic oscillations of the maglev bogie can be directly used and fed back to the maglev control system. To address the dynamic interaction analysis from the maglev vehicle to the guideway girders and vice versa, the entire coupling system is decomposed into two subsystems, one is the moving vehicle subsystem and another the stationary guideway subsystem. Then, an incremental–iterative procedure associated with the Newmark method is presented to solve the two sets of subsystem equations. Finally, the control effectiveness and parametric studies of the optimal virtual TMD scheme on resonance reduction of the moving maglev vehicle are demonstrated.

2003 ◽  
pp. 119-134 ◽  
Author(s):  
Masamichi SOGABE ◽  
Nobuyuki MATSUMOTO ◽  
Makoto TANABE ◽  
Yozo FUJINO ◽  
Hajime WAKUI ◽  
...  

2008 ◽  
Vol 14 (6) ◽  
pp. 867-884 ◽  
Author(s):  
Morio Obata ◽  
Yoji Shimazaki

1989 ◽  
Vol 15 (10) ◽  
pp. 1188-1198 ◽  
Author(s):  
Kang G. Shin ◽  
C.M. Krishna ◽  
Yann-hang Lee

Author(s):  
Ging-Long Lin ◽  
Chi-Chang Lin

Vibration control using tuned mass damper (TMD) for civil structures has been widely accepted and used in buildings and bridges. However, the TMD provides a frequency-dependent damping for the primary structure. The control effectiveness of TMD will vary with the frequency content of the excitation. A method to verify the control performance of TMD is lack in the literatures. In this study, two simple indicators were developed to judge the TMD control performance based on the theoretical derivation, which indicates the maximum power flow is occurred when the TMD stroke lags the structural displacement by ninety degree. The proposed indicators were verified by numerical simulation. The results show the proposed indicators can judge the effective of TMD correctly. In addition, the waveform of the instantaneous phase is helpful to adjust the TMD stiffness to the right value.


2017 ◽  
Vol 17 (01) ◽  
pp. 1750006 ◽  
Author(s):  
Dong-Ju Min ◽  
Myung-Rag Jung ◽  
Moon-Young Kim ◽  
Jong-Won Kwark

The purpose of this paper is to develop a detailed 3D maglev vehicle and guideway model and investigate the dynamic response characteristics of the coupled system. For this, the maglev vehicle is modeled as one cabin and four bogies having eight electromagnetics, four sensors, and four secondary suspensions based on the Urban Transit Maglev (UTM) system in Korea. The 3D dynamic equilibrium equations of the cabin and bogies are derived by considering the actively controlled electromagnetic forces. Also, the equations of motion for the guideway are derived using the modal superposition method for vertical, lateral, and torsional modes. The resulting coupled equations of motion are then solved using a predictor–corrector iterative algorithm. Finally, through the numerical simulation of the developed system, the responses using the 3D maglev vehicle model are compared with those obtained by the corresponding 2D model. The effects of surface irregularity on the dynamic interaction behaviors are then evaluated for increasing vehicle speeds. Particularly, the 3D resonance conditions of the guideway girder and the maglev vehicle are presented considering the resonance conditions due to equidistant moving loads. In addition, some resonance phenomena are rigorously explored, including the lateral resonance by a series of vehicles running on a girder.


Sign in / Sign up

Export Citation Format

Share Document