scholarly journals Third-order discrete unified gas kinetic scheme for continuum and rarefied flows: Low-speed isothermal case

2018 ◽  
Vol 97 (2) ◽  
Author(s):  
Chen Wu ◽  
Baochang Shi ◽  
Chang Shu ◽  
Zhen Chen
2020 ◽  
Vol 2 (1) ◽  
Author(s):  
Rui Zhang ◽  
Chengwen Zhong ◽  
Sha Liu ◽  
Congshan Zhuo

AbstractIn this paper, we introduce the discrete Maxwellian equilibrium distribution function for incompressible flow and force term into the two-stage third-order Discrete Unified Gas-Kinetic Scheme (DUGKS) for simulating low-speed turbulent flows. The Wall-Adapting Local Eddy-viscosity (WALE) and Vreman sub-grid models for Large-Eddy Simulations (LES) of turbulent flows are coupled within the present framework. Meanwhile, the implicit LES are also presented to verify the effect of LES models. A parallel implementation strategy for the present framework is developed, and three canonical wall-bounded turbulent flow cases are investigated, including the fully developed turbulent channel flow at a friction Reynolds number (Re) about 180, the turbulent plane Couette flow at a friction Re number about 93 and lid-driven cubical cavity flow at a Re number of 12000. The turbulence statistics, including mean velocity, the r.m.s. fluctuations velocity, Reynolds stress, etc. are computed by the present approach. Their predictions match precisely with each other, and they are both in reasonable agreement with the benchmark data of DNS. Especially, the predicted flow physics of three-dimensional lid-driven cavity flow are consistent with the description from abundant literature. The present numerical results verify that the present two-stage third-order DUGKS-based LES method is capable for simulating inhomogeneous wall-bounded turbulent flows and getting reliable results with relatively coarse grids.


2020 ◽  
Author(s):  
Rui Zhang ◽  
Chengwen Zhong ◽  
Sha Liu ◽  
Congshan Zhuo

Abstract In this paper, we introduce the incompressible discrete Maxwellian equilibrium distribution function and external forces into the two-stage third-order Discrete Unified Gas-Kinetic Scheme (DUGKS) for simulating low-speed incompressible turbulent flows with forcing term. The Wall-Adapting Local Eddy-viscosity (WALE) and Vreman sub-grid models for Large-Eddy Simulations (LES) of wall-bounded turbulent flows are coupled within the present framework. In order to simulate the three-dimensional turbulent flows associated with great computational cost, a parallel implementation strategy for the present framework is developed, and is validated by three canonical wall-bounded turbulent flows, viz., the fully developed turbulent channel flow at a friction Reynolds number (Re) about 180, the turbulent plane Couette flow at a friction Re number about 93 and three-dimensional lid-driven cubical cavity flow at a Re number of 12000. The turbulence statistics are computed by the present approach with both WALE and Vreman models, and their predictions match precisely with each other. Especially, the predicted flow physics of three-dimensional lid-driven cavity are consistent with the description from abundant literatures. While, they have small discrepancies in comparison to the Direct Numerical Simulation (DNS) due to the relatively low grid resolution. The present numerical results verify that the present two-stage third-order DUGKS-based LES method is capable for simulating inhomogeneous wall-bounded turbulent flows and getting reliable results with relatively coarse grids.


2015 ◽  
Vol 17 (5) ◽  
pp. 1127-1150 ◽  
Author(s):  
Vishnu Venugopal ◽  
Sharath S. Girimaji

AbstractAccurate simulations of high-speed rarefied flows present many physical and computational challenges. Toward this end, the present work extends the Unified Gas Kinetic Scheme (UGKS) to a wider range of Mach and Knudsen numbers by implementing WENO (Weighted Essentially Non-Oscillatory) interpolation. Then the UGKS is employed to simulate the canonical problem of lid-driven cavity flow at high speeds. Direct Simulation Monte Carlo (DSMC) computations are also performed when appropriate for comparison. The effect of aspect ratio, Knudsen number and Mach number on cavity flow physics is examined leading to important insight.


2013 ◽  
Vol 14 (5) ◽  
pp. 1147-1173 ◽  
Author(s):  
Juan-Chen Huang ◽  
Kun Xu ◽  
Pubing Yu

AbstractDue to the rapid advances in micro-electro-mechanical systems (MEMS), the study of microflows becomes increasingly important. Currently, the molecular-based simulation techniques are the most reliable methods for rarefied flow computation, even though these methods face statistical scattering problem in the low speed limit. With discretized particle velocity space, a unified gas-kinetic scheme (UGKS) for entire Knudsen number flow has been constructed recently for flow computation. Contrary to the particle-based direct simulation Monte Carlo (DSMC) method, the unified scheme is a partial differential equation-based modeling method, where the statistical noise is totally removed. But, the common point between the DSMC and UGKS is that both methods are constructed through direct modeling in the discretized space. Due to the multiscale modeling in the unified method, i.e., the update of both macroscopic flow variables and microscopic gas distribution function, the conventional constraint of time step being less than the particle collision time in many direct Boltzmann solvers is released here. The numerical tests show that the unified scheme is more efficient than the particle-based methods in the low speed rarefied flow computation. The main purpose of the current study is to validate the accuracy of the unified scheme in the capturing of non-equilibrium flow phenomena. In the continuum and free molecular limits, the gas distribution function used in the unified scheme for the flux evaluation at a cell interface goes to the corresponding Navier-Stokes and free molecular solutions. In the transition regime, the DSMC solution will be used for the validation of UGKS results. This study shows that the unified scheme is indeed a reliable and accurate flow solver for low speed non-equilibrium flows. It not only recovers the DSMC results whenever available, but also provides high resolution results in cases where the DSMC can hardly afford the computational cost. In thermal creep flow simulation, surprising solution, such as the gas flowing from hot to cold regions along the wall surface, is observed for the first time by the unified scheme, which is confirmed later through intensive DSMC computation.


Sign in / Sign up

Export Citation Format

Share Document