scholarly journals A hybrid finite volume/finite element method for shallow water waves by static deformation on seabeds

2020 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Alia Al-Ghosoun ◽  
Ashraf S. Osman ◽  
Mohammed Seaid
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Free Surface ◽  
Shallow Water ◽  
Finite Volume ◽  
Second Order ◽  
Static Deformation ◽  
Wave Runup ◽  
Content Type ◽  
Element Method

Purpose The purpose of this study is twofold: first, to derive a consistent model free-surface runup flow problems over deformable beds. The authors couple the nonlinear one-dimensional shallow water equations, including friction terms for the water free-surface and the two-dimensional second-order solid elastostatic equations for the bed deformation. Second, to develop a robust hybrid finite element/finite volume method for solving free-surface runup flow problems over deformable beds. The authors combine the finite volume for free-surface flows and the finite element method for bed elasticity. Design/methodology/approach The authors propose a new model for wave runup by static deformation on seabeds. The model consists of the depth-averaged shallow water system for the water free-surface coupled to the second-order elastostatic formulation for the bed deformation. At the interface between the water flow and the seabed, transfer conditions are implemented. Here, hydrostatic pressure and friction forces are considered for the elastostatic equations, whereas bathymetric forces are accounted for in the shallow water equations. As numerical solvers, the authors propose a well-balanced finite volume method for the flow system and a stabilized finite element method for elastostatics. Findings The developed coupled depth-averaged shallow water system and second-order solid elastostatic system is well suited for modeling wave runup by deformation on seabeds. The derived coupling conditions at the interface between the water flow and the bed topography resolve well the condition transfer between the two systems. The proposed hybrid finite volume element method is accurate and efficient for this class of models. The novel technique used for wet/dry treatment accurately captures the moving fronts in the computational domain without generating nonphysical oscillations. The presented numerical results demonstrate the high performance of the proposed methods. Originality/value Enhancing modeling and computations for wave runup problems is at an early stage in the literature, and it is a new and exciting area of research. To the best of our knowledge, solving wave runup problems by static deformation on seabeds using a hybrid finite volume element method is presented for the first time. The results of this research study, and the research methodologies, will have an important influence on a range of other scientists carrying out research in related fields.

Parallel finite-element method using domain decomposition and Parareal for transient motor starting analysis

2019 ◽  
Vol 38 (5) ◽  
pp. 1507-1520 ◽  
Author(s):  
Yasuhito Takahashi ◽  
Koji Fujiwara ◽  
Takeshi Iwashita ◽  
Hiroshi Nakashima
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Parallel Computing ◽  
Domain Decomposition ◽  
Parallel Computation ◽  
Domain Decomposition Method ◽  
Space Time ◽  
Content Type ◽  
Parallel Performance ◽  
Element Method

Purpose This paper aims to propose a parallel-in-space-time finite-element method (FEM) for transient motor starting analyses. Although the domain decomposition method (DDM) is suitable for solving large-scale problems and the parallel-in-time (PinT) integration method such as Parareal and time domain parallel FEM (TDPFEM) is effective for problems with a large number of time steps, their parallel performances get saturated as the number of processes increases. To overcome the difficulty, the hybrid approach in which both the DDM and PinT integration methods are used is investigated in a highly parallel computing environment. Design/methodology/approach First, the parallel performances of the DDM, Parareal and TDPFEM were compared because the scalability of these methods in highly parallel computation has not been deeply discussed. Then, the combination of the DDM and Parareal was investigated as a parallel-in-space-time FEM. The effectiveness of the developed method was demonstrated in transient starting analyses of induction motors. Findings The combination of Parareal with the DDM can improve the parallel performance in the case where the parallel performance of the DDM, TDPFEM or Parareal is saturated in highly parallel computation. In the case where the number of unknowns is large and the number of available processes is limited, the use of DDM is the most effective from the standpoint of computational cost. Originality/value This paper newly develops the parallel-in-space-time FEM and demonstrates its effectiveness in nonlinear magnetoquasistatic field analyses of electric machines. This finding is significantly important because a new direction of parallel computing techniques and great potential for its further development are clarified.

Semi-analytical finite element method for simulating chemical dissolution-front instability problems in fluid-saturated porous media

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Chongbin Zhao ◽  
B.E. Hobbs ◽  
Alison Ord
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Porous Media ◽  
Chemical Dissolution ◽  
Saturated Porous Media ◽  
Content Type ◽  
Front Instability ◽  
Fluid Saturated Porous Media ◽  
Dissolution Front ◽  
Element Method

PurposeThe objective of this paper is to develop a semi-analytical finite element method for solving chemical dissolution-front instability problems in fluid-saturated porous media.Design/methodology/approachThe porosity, horizontal and vertical components of the pore-fluid velocity and solute concentration are selected as four fundamental unknown variables for describing chemical dissolution-front instability problems in fluid-saturated porous media. To avoid the use of numerical integration, analytical solutions for the property matrices of a rectangular element are precisely derived in a purely mathematical manner. This means that the proposed finite element method is a kind of semi-analytical method. The column pivot element solver is used to solve the resulting finite element equations of the chemical dissolution-front instability problem.FindingsThe direct use of horizontal and vertical components of the pore-fluid velocity as fundamental unknown variables can improve the accuracy of the related numerical solution. The column pivot element solver is useful for solving the finite element equations of a chemical dissolution-front instability problem. The proposed semi-analytical finite element method can produce highly accurate numerical solutions for simulating chemical dissolution-front instability problems in fluid-saturated porous media.Originality/valueAnalytical solutions for the property matrices of a rectangular element are precisely derived for solving chemical dissolution-front instability problems in fluid-saturated porous media. The proposed semi-analytical finite element method provides a useful way for understanding the underlying dynamic mechanisms of the washing land method involved in the contaminated land remediation.

Sign in / Sign up

Export Citation Format

Share Document