Effect of spatial side-wall temperature variation on transient natural convection of a nanofluid in a trapezoidal cavity

2017 ◽  
Vol 27 (6) ◽  
pp. 1365-1384 ◽  
Author(s):  
Ammar I. Alsabery ◽  
Ishak Hashim ◽  
Ali J. Chamkha ◽  
Habibis Saleh ◽  
Bilal Chanane
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Temperature Variation ◽  
Wall Temperature ◽  
Convection Heat Transfer ◽  
Side Wall ◽  
Natural Convection Heat Transfer ◽  
Convection Heat ◽  
Content Type ◽  
Transient Natural Convection

Purpose This paper aims to study analytically and numerically the problem of transient natural convection heat transfer in a trapezoidal cavity with spatial side-wall temperature variation. Design/methodology/approach The governing equations subject to the initial and boundary conditions are solved numerically by the finite difference scheme consisting of the alternating direction implicit method and the tri-diagonal matrix algorithm. The left sloping wall of the cavity is heated to non-uniform temperature, and the right sloping wall is maintained at a constant cold temperature, while the horizontal walls are kept adiabatic. Findings It is shown that the heat transfer rate increases in non-uniform heating increments, whereby low wave number values are more affected by the convection. The best heat transfer enhancement results from larger side wall inclination angle; however, trapezoidal cavities require longer time compared to that of square to reach steady state. Originality/value The study of natural convection heat transfer in a trapezoidal cavity filled with nanofluid and heated by spatial side-wall temperature has not yet been undertaken. Thus, the authors of the present study believe that this work is valuable.

Convective heat transfer enhancement: effect of multi-frequency heating

2019 ◽  
Vol 29 (10) ◽  
pp. 3822-3856 ◽  
Author(s):  
Nirmal Kumar Manna ◽  
Nirmalendu Biswas ◽  
Pallab Sinha Mahapatra
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Heat Transfer Enhancement ◽  
Convection Heat Transfer ◽  
Enhancement Effect ◽  
Natural Convection Heat Transfer ◽  
Convection Heat ◽  
Transfer Enhancement ◽  
Content Type ◽  
Frequency Heating

Purpose This study aims to enhance natural convection heat transfer for a porous thermal cavity. Multi-frequency sinusoidal heating is applied at the bottom of a porous square cavity, considering top wall adiabatic and cooling through the sidewalls. The different frequencies, amplitudes and phase angles of sinusoidal heating are investigated to understand their major impacts on the heat transfer characteristics. Design/methodology/approach The finite volume method is used to solve the governing equations in a two-dimensional cavity, considering incompressible laminar flow, Boussinesq approximation and Brinkman–Forchheimer–Darcy model. The mean-temperature constraint is applied for enhancement analysis. Findings The multi-frequency heating can markedly enhance natural convection heat transfer even in the presence of porous medium (enhancement up to ∼74 per cent). Only the positive phase angle offers heat transfer enhancement consistently in all frequencies (studied). Research limitations/implications The present research idea can usefully be extended to other multi-physical areas (nanofluids, magneto-hydrodynamics, etc.). Practical implications The findings are useful for devices working on natural convection. Originality/value The enhancement using multi-frequency heating is estimated under different parametric conditions. The effect of different frequencies of sinusoidal heating, along with the uniform heating, is collectively discussed from the fundamental point of view using the average and local Nusselt number, thermal and hydrodynamic boundary layers and heatlines.

Numerical analysis of natural convection heat transfer and entropy generation in a porous quadrantal cavity

2019 ◽  
Vol 29 (12) ◽  
pp. 4826-4849 ◽  
Author(s):  
Shantanu Dutta ◽  
Arup Kumar Biswas ◽  
Sukumar Pati
Keyword(s):  
Heat Transfer ◽  
Porous Medium ◽  
Natural Convection ◽  
Convection Heat Transfer ◽  
Bottom Wall ◽  
Natural Convection Heat Transfer ◽  
Convection Heat ◽  
Uniform Temperature ◽  
Content Type ◽  
Temperature Heating

Purpose The purpose of this paper is to analyze the natural convection heat transfer and irreversibility characteristics in a quadrantal porous cavity subjected to uniform temperature heating from the bottom wall. Design/methodology/approach Brinkmann-extended Darcy model is used to simulate the momentum transfer in the porous medium. The Boussinesq approximation is invoked to account for the variation in density arising out of the temperature differential for the porous quadrantal enclosure subjected to uniform heating on the bottom wall. The governing transport equations are solved using the finite element method. A parametric study is carried out for the Rayleigh number (Ra) in the range of 103 to 106 and Darcy number (Da) in the range of 10−5-10−2. Findings A complex interaction between the buoyant and viscous forces that govern the transport of heat and entropy generation and the permeability of the porous medium plays a significant role on the same. The effect of Da is almost insignificant in dictating the heat transfer for low values of Ra (103, 104), while there is a significant alteration in Nusselt number for Ra ≥105 and moreover, the change is more intense for larger values of Da. For lower values of Ra (≤104), the main contributor of irreversibility is the thermal irreversibility irrespective of all values of Da. However, the fluid friction irreversibility is the dominant player at higher values of Ra (=106) and Da (=10−2). Practical implications From an industrial point of view, the present study will have applications in micro-electronic devices, building systems with complex geometries, solar collectors, electric machinery and lubrication systems. Originality/value This research examines numerically the buoyancy driven heat transfer irreversibility in a quadrantal porous enclosure that is subjected to uniform temperature heating from the bottom wall, that was not investigated in the literature before.

Physical–numerical parameters in turbulent simulations of natural convection on three-dimensional square plates

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Sílvio Aparecido Verdério Júnior ◽  
Vicente Luiz Scalon ◽  
Santiago del Rio Oliveira ◽  
Mario Cesar Ito
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Open Source Software ◽  
Convection Heat Transfer ◽  
Turbulence Models ◽  
Natural Convection Heat Transfer ◽  
Problem Situation ◽  
Convection Heat ◽  
Wall Functions ◽  
Content Type

Purpose This paper aims to study, experimentally validate and select the main physical and numerical parameters of influence in computational numerical simulations to evaluate mean heat flux by natural convection on square flat plates. Design/methodology/approach Several numerical models were built to study the influence of physical and numerical parameters about the predictions of the natural convection heat transfer rates on the surface of a flat plate with aspect ratio = 1, in isothermal conditions, turbulent regime and using the free and open-source software OpenFOAM®. The studied parameters were: boundary conditions (using or not using wall functions in properties ε, κ, νt and ω), degree of mesh refinement, refinement layers and turbulence models [κ – ε and κ – ω Shear Stress Transport (SST)]. From the comparison of the values of the mean Nusselt number, obtained from numerical simulations and literature experimental results, the authors evaluated the precision of the studied parameters, validating and selecting the most appropriate to the analyzed problem situation. Findings The validation and agreement of the numerical results could be proven with excellent precision from experimental references of the technical scientific literature. More refined meshes with refinement layers were not suitable for the studies developed. The κ – ε and κ – ω SST turbulence models, in meshes without refinement layers, proved to be equivalent. Whether or not to use wall functions in turbulent boundary conditions proved to be irrelevant as to the accuracy of results for the problem situation studied. Practical implications Use of the physical and numerical parameters is studied and validated for various applications in natural convection heat transfer of technology and industry areas. Social implications Use of free and open-source software as a research tool in the Computational Fluid Dynamics (CFD) area, especially in conditions without large financial resources or state-of-the-art infrastructure. Originality/value To the best of the authors’ knowledge, this work is yet not available in existing literature.

Numerical study of surface radiation and combined natural convection heat transfer in a solar cavity receiver

2017 ◽  
Vol 27 (10) ◽  
pp. 2385-2399 ◽  
Author(s):  
Kamel Milani Shirvan ◽  
Mojtaba Mamourian ◽  
Soroush Mirzakhanlari ◽  
A.B. Rahimi ◽  
R. Ellahi
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Rayleigh Number ◽  
Numerical Solutions ◽  
Convection Heat Transfer ◽  
Surface Radiation ◽  
Natural Convection Heat Transfer ◽  
Convection Heat ◽  
Surface Emissivity ◽  
Content Type

Purpose The purpose of this paper is to present the numerical solutions of surface radiation and combined natural convection heat transfer in a solar cavity receiver. The paper aims to discuss sundry issues that take place in the said model. Design/methodology/approach The numerical solutions are developed by means of second-order upwind scheme using the SIMPLE algorithm. Findings The effects of physical factors such as Rayleigh number (104 ≤ Ra ≤ 106), inclination angels of insulated walls (0º ≤ θ ≤ 10º) and the wall surface emissivity (0 ≤ ε ≤ 1) on natural convection-surface radiation heat transfer rate are analyzed. Impact of sundry parameters on flow quantities are discussed and displayed via graphs and tables. Stream lines and isothermal lines have also been drawn in the region of cavity. The numerical results reveal that increasing the Rayleigh number, wall surface emissivity and inclination angels of insulated walls in an open cavity enhances the mean total Nusselt number. The variations of the surface radiation and natural convection heat transfer mean Nusselt numbers are very small to the inclination angle of θ, while a significant change is noted for the case of Rayleigh number and emissivity. Originality/value To the best of authors’ knowledge, this model is reported for the first time.

Sign in / Sign up

Export Citation Format

Share Document