Rings with Hirth couplings are primarily used for the accurate positioning of axial-symmetric components in the machine tool industry and, generally, in mechanical components. It is also possible to use Hirth rings as connection tools. Specific industries with special milling and grinding machines are able to manufacture both tailor made and standard Hirth rings available on stock. Unfortunately, no international standard (for instance ISO, DIN or AGMA) is available for the production and the design of such components. In the best-case scenario, it is possible to find simplified design formulae in the catalogue of the suppliers. The aim of this work is to provide some accurate formulae and computational methods for design to provide better awareness on the limitations and the potential of this type of connection. The work consists of five parts: (i) a review of the base calculation derived mainly from the catalogues of manufacturers; (ii) an improved calculation based on a new analytical method including the friction phenomenon; (iii) an experimentation run for validating the method; (iv) a case study applied to a machine tool; and, (v) a closed form formulation to determine an upper threshold for friction, thus ensuring the Hirth coupling regular performance.
UPSTREAM VOLATILITY IN THE SUPPLY CHAIN: THE MACHINE TOOL INDUSTRY AS A CASE STUDY