scholarly journals Channel Modeling for Future High-Speed Railway Communication Systems: A Survey

IEEE Access ◽  
2019 ◽  
Vol 7 ◽  
pp. 52818-52826 ◽  
Author(s):  
Tao Zhou ◽  
Huayu Li ◽  
Yang Wang ◽  
Liu Liu ◽  
Cheng Tao
2018 ◽  
Vol 2018 ◽  
pp. 1-7 ◽  
Author(s):  
Tao Zhou ◽  
Cheng Tao ◽  
Kai Liu

This paper presents the analysis of nonstationary characteristics for high-speed railway (HSR) scenarios, according to passive long-term evolution- (LTE-) based channel measurements. The measurement data collected in three typical scenarios, rural, station, and suburban, are processed to obtain the channel impulse responses (CIRs). Based on the CIRs, the nonstationarity of the HSR channel is studied focusing on the stationarity interval, and a four-state Markov chain model is generated to describe the birth-death process of multipath components. The presented results will be useful in dynamic channel modeling for future HSR mobile communication systems.


2017 ◽  
Vol 2017 ◽  
pp. 1-15 ◽  
Author(s):  
Jianwen Ding ◽  
Lei Zhang ◽  
Jingya Yang ◽  
Bin Sun ◽  
Jiying Huang

The rapid development of high-speed railway (HSR) and train-ground communications with high reliability, safety, and capacity promotes the evolution of railway dedicated mobile communication systems from Global System for Mobile Communications-Railway (GSM-R) to Long Term Evolution-Railway (LTE-R). The main challenges for LTE-R network planning are the rapidly time-varying channel and high mobility, because HSR lines consist of a variety of complex terrains, especially the composite scenarios where tunnels, cuttings, and viaducts are connected together within a short distance. Existing researches mainly focus on the path loss and delay spread for the individual HSR scenarios. In this paper, the broadband measurements are performed using a channel sounder at 950 MHz and 2150 MHz in a typical HSR composite scenario. Based on the measurements, the pivotal characteristics are analyzed for path loss exponent, power delay profile, and tap delay line model. Then, the deterministic channel model in which the 3D ray-tracing algorithm is applied in the composite scenario is presented and validated by the measurement data. Based on the ray-tracing simulations, statistical analysis of channel characteristics in delay and Doppler domain is carried out for the HSR composite scenario. The research results can be useful for radio interface design and optimization of LTE-R system.


2021 ◽  
Vol 36 (7) ◽  
pp. 879-884
Author(s):  
Hao Li ◽  
Lu Xu ◽  
Feng Qian ◽  
Yong Zhou

As a convenient and efficient public transport system, high speed railway (HSR) was rapidly deployed in China. Since the fifth generation (5G) mobile communication system is commercially applied, it is necessary for mobile terminals antennas to cover multiple operating bands to be compatible with various communication systems. Here a HSR-mounted broadband and high-gain monopole antenna is proposed. By using the meander technology and introducing the tapered structure, the proposed antenna operates over a bandwidth of 694-960 MHz and 1350-5975 MHz (VSWR<1.8), which covers both 2G-5G mobile communication and WiFi frequency bands. The dimensions of the proposed antenna are 400 mm × 330 mm × 78 mm. The measured average gain is 6.11 dBi over the entire bandwidth.


Author(s):  
Longhe Wang ◽  
Bo Ai ◽  
Ke Guan ◽  
Danping He ◽  
Zhangdui Zhong ◽  
...  

2015 ◽  
Vol 53 (10) ◽  
pp. 70-77 ◽  
Author(s):  
Tao Zhou ◽  
Cheng Tao ◽  
Sana Salous ◽  
Liu Liu ◽  
Zhenhui Tan

Sign in / Sign up

Export Citation Format

Share Document