Design space minimization with timing and code size optimization for embedded DSP

Author(s):  
Qingfeng Zhuge ◽  
Zili Shao ◽  
Bin Xiao ◽  
W.H.-M. Sha
2015 ◽  
Vol 137 (12) ◽  
Author(s):  
Babak Dizangian ◽  
Mohammad Reza Ghasemi

This article proposes a novel ranked-based method for size optimization of structures. This method uses violation-based sensitivity analysis and borderline adaptive sliding technique (ViS-BLAST) on the margin of feasible nonfeasible (FNF) design space. ViS-BLAST maybe considered a multiphase optimization technique, where in the first phase, the first arbitrary local optimum is found by few analyses and in the second phase, a sequence of local optimum points is found through jumps and BLASTs until the global optimum is found. In fact, this technique reaches a sensitive margin zone where the global optimum is located, with a small number of analyses, utilizing a space-degradation strategy (SDS). This strategy substantially degrades the high order searching space and then proceeds with the proposed ViS-BLAST search for the optimum design. Its robustness and effectiveness are then defied by some well-known benchmark examples. The ViS-BLAST not only speeds up the optimization procedure but also it ensures nonviolated optimum designs.


Author(s):  
Sreeram Polavarapu ◽  
Lonny L. Thompson ◽  
Mica Grujicic

Finite element analysis, together with topology and free-size optimization is used to design a lightweight die cast automotive front seat backrest frame when subjected to loads prescribed by ECE R17 European government regulations and additional loads which are predicted in an event of crash. In particular, an effort is made here to study the characteristics of a die cast automotive front seat backrest frame and develop a method for predicting the optimized material and support rib distribution which provides a lightweight seat which satisfies both strength and deflection requirements in a design space which includes the action of multiple load cases. An existing commercially available die cast backrest frame serves as the reference design space. Both 3D surface and solid models are created for representation as shell and solid finite element models for analysis. The objective function for topology optimization of the 3D solid model is to minimize mass of the component subject to stress and deflection constraints and is used as a guide in determining optimal geometric distribution of stiffening ribs. When the shell model of the reference seat is subjected to free-size optimization with this same constraint and objective given, an optimized material distribution measured by shell element thicknesses is obtained. For the topology optimization, manufacturing constraints of preferred draw direction and symmetry are applied in order to obtain an optimized material distribution which can be manufactured in the die-cast process. The procedure followed in this work generated an optimal material distribution and stiffening ribs in a lightweight die cast automotive seat backrest frame when subjected to multiple load cases. An overall reduction in weight of 13% is achieved over a reference commercially available die cast backrest frame component.


Author(s):  
Meilin Liu ◽  
Qingfeng Zhuge ◽  
Zili Shao ◽  
Chun Xue ◽  
Meikang Qiu ◽  
...  
Keyword(s):  

2010 ◽  
Vol 62 (3) ◽  
pp. 325-340
Author(s):  
Meilin Liu ◽  
Edwin H. -M. Sha ◽  
Qingfeng Zhuge ◽  
Yi He ◽  
Meikang Qiu
Keyword(s):  

Author(s):  
Stan Liao ◽  
Srinivas Devadas ◽  
Kurt Keutzer ◽  
Steve Tjiang

Sign in / Sign up

Export Citation Format

Share Document