Abstract
This case study details the use of Sealed Wellbore Pressure Monitoring (SWPM) to improve the characterization of fracture geometry and propagation during stimulation of inter-connected stacked pay in the South Texas Eagle Ford Shale.
The SWPM workflow utilizes surface pressure gauges to detect hydraulically induced fracture arrivals athorizontal monitor locations adjacent to the stimulated wellbore (Haustveit et al. 2020). A stacked and staggered development in Dewitt County provided the opportunity to jointly evaluateprimary completion and recompletion efforts spanning three reservoir target intervals. Fivemonitor wells at varying distances across the unit were employed for SWPM during the stimulation of four wells. An operational overview, analysis of techniques, correlation with seismic attributes, image log interpretations, and fracture model calibration are provided.
Outputs from this workflow allow for a refined analysis ofthe overall completion strategy. The high-density, five well monitor array recorded a total of 160 fracture arrivals at varying vertical and lateral distances, with far-field fracture arrivalsprovidingsignificant insight into propagation rates and geometry. Apronounced trend occurred in both arrival frequency and volumes pumped as monitor locations increased in distance from the treatment well. Specific to target zone isolation, it was identified that traversing vertically in section through a high stress interval yielded a 30% reduction inarrival frequency. An indirect relationship between horizontal distance and arrival frequency was also observed when monitoring from the same interval. A decrease in fracture arrivals from 70% down to 8% was realized as offset distance increased from 120 to 1,700 ft.
The results from this study have proven to be instrumental in guiding interdisciplinary discussion. Assessing fracture geometry and propagation during stimulation, particularly in the co-development of a stacked pay reservoir, is paramount to the determination of proper completion volume, perforation design, and well spacing. Leveraging the observations of SWPM ultimately provides greater confidence in field development strategy and economic optimization.
