Application of Integrated Far-Field Diversion Technology in Multistage Acid-Fracturing: Lesson Learnings from Unconventional Field North Kuwait

The unconventional Bahrah field is a high potential field which poses several challenges in terms of hydrocarbon flow assurance through highly heterogeneous tight carbonate intervals with poor reservoir quality and curtailed mobility. Due to this, the field development strategies have prioritized well completion using horizontal acid fracturing technology over vertical wells. During fracturing, the acid system tends to form highly conductive channels in the formation. Most of the fluid will flow into the path of least resistance leaving large portions of the formation untreated. As a result, the fracturing treatment options dwindle significantly, thus reservoir stimulation results are not optimum in each stage. Achieving complete wellbore coverage is a challenge for any acid frac treatment performed in long lateral with variations in reservoir characteristics. The multistage acid fracturing using Integrated Far-field Diversion (IFD) is performed using selective openhole completion, enabling mechanical annular segmentation of the wellbore using swellable packers and sliding sleeves. The mechanical as well as chemical diversion in IFD methodology is highly important to the overall stimulation success. The technique includes pumping multiple self-degrading particle sizes, considering the openhole annular space and wide presence of natural fractures, followed by in-situ HCL based crosslinked system employed for improving individual stage targets. A biomodal strategy is employed wherein larger particles are supplemented with smaller that can bridge pore throats of the larger particles and have the desired property of rigidity and develop a level of suppleness once exposed to reservoir conditions. The IFD diversion shifts the fracture to unstimulated areas to create complex fractures that increase reservoir contact volume and improving overall conductivity. This paper examines IFD in acid fracturing and describes the crucial diversion strategy. Unlike available diverters used in other fields, the particulates are unaffected at low pH values and in live acids. Proper agent selection and combination with in-situ crosslink acid effectively plug the fracture generated previously and generate pressure high enough to initiate another fracture for further ramification. The optimization and designing of the IFD diversion in each stage plays a key role and has helped to effectively plug fractures and realize segmentation. Concentration of diversion agents, volume of fluid system and open-hole stage length sensitivity plays vital role for the success of this treatment. The application of IFD methodology is tuned as fit-for-purpose to address the unique challenges of well operations, formation technical difficulties, high-stakes economics, and untapped high potential from this unconventional reservoir. A direct result of this acid fracturing treatment is that the post-operation data showed high contribution of all fractured zones along the section in sustained manner. Furthermore, this methodology can be considered as best practice for application in unconventional challenges in other fields.

Achieving Productivity and Clean Inflow from an Unconventional Reservoir in North Kuwait

Jurassic Kerogen shale/carbonate reservoir in North Kuwait provides the same challenges as North American shales in addition to ones not yet comparable to any other analogue reservoir globally. It is the Kerogen's resource density; however, that makes this play so attractive. Like ‘conventional’ unconventional in the US and Canada this kerogen is believed to be a source rock and is on the order of micro-to nano-Darcy permeability. As such, industry learnings show that likely long horizontal laterals with multiple hydraulic fractures will be necessary to make commercial wells. Following this premise, the immediate objective is to establish clean inflow into wellbore as the previous attempts to appraise failed due to "creep" of particulate material and formation flowing into the wellbore. Achieving this milestone will confirm that this formation is capable of solids free inflow and will open a new era in unconventional in Kuwait. Planning for success, the secondary objective is to then upscale to full field development. The main uncertainties lie in both producibility and ‘frac-ability’, and certainly, these challenges are not trivial. A fully integrated testing program was applied to both better understand the rock mechanical properties and to land on an effective frac design. Scratch, unconfined stress, proppant embedment and fluid compatibility tests were conducted on full core samples for geo-mechanics to prepare a suite of strength measurements ahead of frac design and to custom-design the fracture treatment and "controlled" flowback programs to establish inflow from Kerogen without "creep". Unlike developed shale reservoirs, the Jurassic Kerogen tends to become unconsolidated when treated. The pre-frac geomechanics tests will be outlined in this paper with the primary objective of finding the most competent reservoir unit to select the limited perforation interval to frac through so that formation competency can be maintained. Previous attempts failed to maintain a competent rock matrix even only after pumping data-fracs. Acidizing treatments also turn the treated rock volume into sludgy material with no in-situ stability nor ability to deliver "clean inflow". A propped fracturing treatment with resin-coated bauxite was successfully placed in December 2019 in a vertical appraisal well perforated over 6 ft at 12 spf shot density. "Controlled" flowback carried out in January 2020 achieved the strategically critical "clean inflow" with reservoir fluids established to surface. Special proppant technologies provided by an industry leading manufacturer overcame the embedment effects and to control solids flowback. A properly designed choke schedule to balance unloading with a delicate enough drawdown to avoid formation failure was executed. Local oilfields relied on the vast reserves and produced easily from carbonate reservoirs that required only perforating or acid squeezes to easily meet or exceed high production expectations. This unconventional undertaking in Kuwait presents a real challenge as it is a complete departure from the ways of working yet it points towards a very high upside potential should the appraisal campaign can be completed effectively.

Production Monitoring of Multilateral Wells by Quantum Marker Systems

Reliable information about the inflow composition and distribution in a multilateral well is of great importance and an existing challenge in the oil and gas industry. In this paper, we present an innovative method for dynamic monitoring of inflow profile based on quantum marker technology in a multi-lateral well located in West Siberia. Marker systems were placed in the well during the well reconstruction by horizontal side tracking with the parent borehole remaining in production. This way of reconstruction allows development of the reservoir drainage area with a lateral hole and bringing the oil reserves from the parent borehole into production, which results in an increased flow rate and improved oil recovery rate. Placement of marker systems into parent borehole and side-track for fluid distribution monitoring allows to evaluate the flow rate from every borehole and estimate the effectiveness of performed well reconstruction. Marker systems are placed into the parent borehole as a downhole sub installed into the well completion string. For the side-track polymer-coated marked proppant was injected during hydraulic fracturing to place markers. The developed method was reliably used for an accurate and fast determination of the inflow distribution in a multi-lateral well which allows more efficient field development and also enabled us to provide effective solutions for following challenges: Providing tools for timely water cut diagnostics in multilateral wells and information for water shut-off method selection; Selecting the optimal well operating mode for effective field development and premature flooding prevention in one or both boreholes; Evaluating whether well construction was performed efficiently, and an increased production rate was achieved; Leading to a considerable economic savings in capital expenditure.

Choosing a methodological base for forming and accounting for the construction costs of a gas well at the final stage of field development

The article introduces the problems of choosing a methodological base for forming and accounting costs during well construction, taking into account the intensification of gas inflow at the final stage of field development. The main methods that allow taking into account the costs of drilling operations are outlined. The main costs that need to be taken into account when designing fields with hard-to-recover gas reserves are identified and characterized. The main stages of cost formation by construction phases of a gas-producing well are shown, as well as the factors influencing the level and structure of the cost price during the construction of a well are highlighted. The authors consider the classification of cost accounting methods in the context of the comparison criterion and present the possible results of the correct choice of the cost formation method during the construction of a gas well at the final stage of its development.

Methodological approaches to increasing the flooding system efficiency at the later stage of reservoir development

Based on the analysis of the efficiency of CVI.1 and CVI.2 oil reservoirs development, which partially coincide in structural terms, and the terrigenous strata of the Lower Carboniferous of one of Volga-Ural oil and gas province oil fields, an algorithm for assessing the efficiency of waterflooding was proposed, which takes into account the geological structure of the facility, the results of core and geophysical well surveys, as well as the historical performance of wells. The presented algorithm makes it possible to identify ineffective injection directions for making decisions on waterflooding system optimizing. The effect is the identified potential to cut costs by reducing inefficient injection, as well as identifying areas for the introduction of enhanced oil recovery techniques. Keywords: field development; reservoir pressure maintenance system; waterflooding efficiency; cost reduction.

Carbonate Platform Reef-Shoal Reservoir Architecture Study and Characteristic Evaluation: A Case of S Field in Turkmenistan

Carbonate sediments are susceptible to many factors, such as paleostructure, diagenesis, and strong microbial alteration; as such, their sedimentary architecture still calls for further research. In this study, the reef and shoal bodies in the XVm and XVp layers of the Middle–Upper Jurassic Karlov-Oxfordian in the S gas field were used as the object, and the architecture of the reef-shoal facies was studied. Based on the idea of “vertical grading and horizontal boundary”, the interface characteristics of the 6th to 4th levels of reef-shoal bodies in the study area were summarized, as were four ways to determine the boundaries of reef-shoal bodies. Based on the dense well network, we quantitatively described the scale of each small layer of single reef shoal body through the point-line-surface method and established a geological database of the reef shoal bodies in the study area. In addition, we established the width and thickness of the reef shoal body and the empirical formula for relationships. The study of morphological characteristics of reef-shoal bodies and the degree of overlap revealed six architecture models of reef-shoal bodies. The vertical and lateral superimposed reefs were obtained by evaluating the reservoir space, pore throat characteristics, and physical property characteristics corresponding to various architecture models. The vertical and lateral superimposed shoals corresponded to large reservoir thicknesses. The petrophysical properties were good, and we concluded that the reef-shoal superimposed area was a sweet spot for reservoir development. We applied the research results of reef-shoal architecture reservoir characteristics to gas field development, and therefore improved well pattern deployment in the reef-shoal superimposed area. By comparing the test results of newly deployed horizontal wells with adjacent vertical wells, we confirmed that the selection of horizontal wells was better for gas field development. This study on the architecture of reef-shoal facies could guide the study of carbonate rock architecture.

Evaluation of Oil and Gas Economy using Economics Profit Indicators and Prototype Macro VBA Excel

The oil and gas sector is an important factor in sustainable development, so it is considered necessary to make serious changes in conducting economic analysis on the oil and gas business. Oil and gas industry activities consist of upstream activities, and downstream activities. Activities in these upstream and downstream operations have high risk, high costs and high technology, so the company continuously tries to reduce the importance of the adverse impact of these risks on the work environment and people. Thus, evaluating the factors that affect sustainable production in this sector becomes a necessity. In this research will be evaluated the economy of the oil and gas field using methods of economic indicators, among others; NPV, POT, ROR, where these factors are estimated in order to be able to estimate the prospects of the oil and gas field so that the decision that the field development project can be implemented or cannot be taken immediately. Implementation of oil and gas field economic evaluation in this study using Macro VBA Excel. From several methods of economic analysis obtained that the results of this study show high precision compared to other methods, in addition to the way of evaluation using the above economic indicators is very popular.

Exploration and Validation of Force Field Design Protocols through QM-to-MM Mapping

The scale of the parameter optimisation problem in traditional molecular mechanics force field construction means that design of a new force field is a long process, and sub-optimal choices made in the early stages can persist for many generations of the force field. We hypothesise that careful use of quantum mechanics to inform molecular mechanics parameter derivation (QM-to-MM mapping) should be used to significantly reduce the number of parameters that require fitting to experiment and increase the pace of force field development. Here, we design a collection of 15 new protocols for small, organic molecule force field design, and test their accuracy against experimental liquid properties. Our best performing model has only seven fitting parameters, yet achieves mean unsigned errors of just 0.031 g/cm3 and 0.69 kcal/mol in liquid densities and heats of vaporisation, compared to experiment. The software required to derive the designed force fields is freely available at https://github.com/qubekit/QUBEKit.

ALGORITHM FOR DETERMINATION OF BRAKE EFFICIENCY OF INDUSTRIAL RAILWAY TRAINS

The main differences between the operating conditions of industrial railway transport from the main-line ones, which feature the performance of technological transportation, i.e., the transportation of goods within the local boundaries of enterprises (domestic technological transportation), and import (export) of goods to other modes of transport (external transportation). Industrial railway transport plays an important role at mining enterprises, as the working conditions of these enterprises are not constant and getting continuously more complicated during the entire period of field development. In this regard, one of the most important factors in ensuring the train safety is the braking efficiency. The calculation of the braking efficiency of a quarry train is performed according to special rules, and the parameters of the braking process that affect the braking distance are set by coefficients. As an estimated characteristic of braking efficiency for industrial railway transport, the maximum speed is taken, at which the braking distance should be no more than 300 m, regardless of the magnitude of the slope of the railway track. For the first time it is proposed to determine the allowable speed by the iterative method using a correction factor, the choice of which is due to the fact that the relationship between speed and braking distance is described by a quadratic function. The calculation showed that in five iterations the difference between the calculated and normative values of the braking distance of 0.01 m (1 cm) is achieved, which indicates the efficiency effect of the proposed determination procedure. The software allows you to automatically perform calculated studies for a given range of values of the slopes. The results of the train calculation in a specified range of slope values are given, as well as an analytical expression for determining the maximum speed for a given arbitrary slope value. Key words: allowable speed, braking distance, iterative process, correction factor, algorithm.

Complex Stimulation Approach to Low-Temperature Carbonate Formation Revitalizes Bahrain Brownfield

Carbonate formations often require stimulation treatments to be developed economically. Sometimes, proppant fracturing yields better results than acid stimulation. Carbonates are seldom stimulated with large-mesh-size proppants due to admittance issues caused by fissures and high Young’s modulus and narrow fracture width. The Magwa formation of Bahrain’s Awali brownfield is a rare case in which large treatments using 12/20-mesh proppant were successful after the more than 50 years of field development. To achieve success, a complex approach was required during preparation and execution of the hydraulic fracturing campaign. During the first phase, the main challenges that restricted achieving full production potential in previous stimulation attempts (both acid and proppant fracturing) were identified. Fines migration and shale instability were addressed during advanced core testing. Tests for embedment were conducted, and a full suite of logs was obtained to improve geomechanical modeling. In addition, a target was set to maximize fracture propped length to address the need for maximum reservoir contact in the tight Magwa reservoir and to maximize fracture width and conductivity. Sufficient fracture width in the shallow oil formation was required to withstand embedment. Sufficient conductivity was required to clean out the fracture under low-temperature conditions (124°F) and to minimize drawdown along the fracture considering the relatively low energy of the formation (pore pressure less than 1,000 psi). Understanding the fracture dimensions was critical to optimize the design. Independent measurement using high-resolution temperature logging and advanced sonic anisotropy measurements after fracturing helped to quantify fracture height. As a result of the applied comprehensive workflow, 18 wells were successfully stimulated, including three horizontal wellbores with multistage fracturing - achieving effective fracture half-lengths of 450-to 500-ft. Oil production from the wells exceeded expectations and more than doubled the results of all the previous attempts. Production decline rates were also less pronounced due to achieved fracture length and the ability to produce more reservoir compartments. The increase in oil recovery is due to the more uniform drainage systems enabled by the conductive fractures. The application of new and advanced techniques taken from several disciplines enabled successful propped fracture stimulation of a fractured carbonate formation. Extensive laboratory research and independent geometry measurements yielded significant fracture optimization and resulted in a step-change in well productivity. The techniques and lessons learned will be of benefit to engineers dealing with shallow carbonate reservoirs around the world.