Comparison of a synchronous reference frame virtual impedance-based autonomous current sharing control with conventional droop control for parallel-connected inverters

Author(s):  
Yajuan Guan ◽  
Josep M. Guerrero ◽  
Xin Zhao ◽  
Juan C. Vasquez

Power flow control is most important in inverter interfaced Microgrids with highly penetrated DERs in islanded mode for their functionality to feed the connected loads. The different types of interfacing inverters connected to DERs, have been discussed for their principle of operation. The conventional inverters with droop control method of, P-f, Q-v alone failed to control with unequal line impedances. New inverters with SRFvirtual impedance compensation and SRF-phase locked loop along with droop characterstics have been implemented for defined functionalities in this paper. The design guidelines have been provided and the results are evaluated in Matlab/ Simulink platform to prove the effectiveness of the methodology.


Energies ◽  
2021 ◽  
Vol 14 (19) ◽  
pp. 6040
Author(s):  
Mostafa A. Hamood ◽  
Ognjen Marjanovic ◽  
Joaquin Carrasco

In this paper, an adaptive version of the impedance-conditioned phase-locked loop (IC-PLL), namely the adaptive IC-PLL (AIC-PLL), is proposed. The IC-PLL has recently been proposed to address the issue of synchronisation with a weak AC grid by supplementing the conventional synchronous reference frame phase-locked loop (SRF-PLL) with an additional virtual impedance term. The resulting IC-PLL aims to synchronise the converter to a remote and stronger point in the grid, hence increasing the upper bound on the achievable power transfer achieved by the VSC converter connected to the weak grid. However, the issue of the variable grid strength imposes another challenge in the operation of the IC-PLL. This is because the IC-PLL requires impedance estimation methods to estimate the value of the virtual impedance part. In AIC-PLL, the virtual impedance part is estimated by appending another dynamic loop in the exciting IC-PLL. In this method, an additional closed loop is involved so that the values of the virtual inductance and resistance are internally estimated and adapted. Hence, the VSC converter becomes effectively viable for the case of the grid strength variable, where the estimation of the grid impedance becomes unnecessary. The results show that the converter that relies on AIC-PLL has the ability to transfer power that is approximately equal to the theoretical maximum power while maintaining satisfactory dynamic performance.


Sign in / Sign up

Export Citation Format

Share Document