Computational Focusing Sensor: Enhancing Spatial Resolution of Electrical Impedance Tomography in Region of Interest

2021 ◽  
pp. 1-1
Author(s):  
Yu Wang ◽  
Feng Dong ◽  
Shangjie Ren
2021 ◽  
Vol 2008 (1) ◽  
pp. 012002
Author(s):  
C E Castillo ◽  
A E Álvarez

Abstract Electrical impedance tomography (EIT) is a medical imaging modality that considers the electrical properties of tissues to obtain a conductivity distribution of a region of interest using the level of resistance it presents to the passage of a small electrical current. This work describes the design of an 8-electrode EIT prototype that offers the possibility of changing the excitation parameters and freedom of movement of the demodulation synchrony by means of conventional electronics. The image reconstruction obtained can locate disturbances in the study medium using the adjacent electrode method. A comparison of the voltage measurements acquired on a homogeneous test medium in two different collection cycles was implemented to determine the precision of the system. The data obtained indicate a maximum error percentage of 2.6% between measurements, which represents an acceptable first approach towards the design of a device with greater stability and precision.


2012 ◽  
Vol 61 (8) ◽  
pp. 1199-1205 ◽  
Author(s):  
Chan-Yong Kim ◽  
Jeong-Min Kang ◽  
Ji-Hoon Kim ◽  
Bong-Yeol Choi ◽  
Kyung-Youn Kim

2015 ◽  
Vol 9 (1) ◽  
pp. 211-229 ◽  
Author(s):  
Dong liu ◽  
◽  
Ville Kolehmainen ◽  
Samuli Siltanen ◽  
Anne-maria Laukkanen ◽  
...  

2019 ◽  
Vol 5 (1) ◽  
pp. 199-202
Author(s):  
Sabine Krueger-Ziolek ◽  
Bo Gong ◽  
Bernhard Laufer ◽  
Knut Moeller

AbstractElectrical Impedance Tomography (EIT), an imaging technique which operates non-invasively and without radiation exposure, provides information about ventilation- and cardiac-synchronous (pulsatile) changes in the lung. It is well known, that perfusion within the thorax is influenced by lung volume or intrathoracic pressure. In this observational study, it shall be investigated if this phenomenon can be monitored by EIT. Therefore, the impact of the amount of air within the lung on the pulsatile EIT signal was evaluated by carrying out EIT measurements with a spontaneously breathing lung healthy subject holding the breath at three different inspiratory and three various expiratory volume levels during normal tidal breathing. For EIT data analysis, a region of interest was defined by including lung tissue and excluding the heart region. The EIT data revealed, that the shape and the amplitude of the pulsatile EIT signal (evaluated per heartbeat) during the phases of breath holding were dependent on the enclosed lung volume. For lung volumes > 4 L, the amplitude of the pulsatile EIT signal increased with rising inspiratory level and the shape remained almost unchanged. For lung volumes < 4 L, a change in shape was visible but the amplitude remained more or less the same with decreasing expiratory level. Since the results of this observational study show that the pulsatile EIT signal is influenced by the lung volume, it might be used in future to draw conclusions of cardiacpulmonary interactions or intrathoracic pressure states, benefitting the treatment of intensive care patients.


2013 ◽  
Vol 2013 ◽  
pp. 1-9 ◽  
Author(s):  
Hyeuknam Kwon ◽  
Alistair L. McEwan ◽  
Tong In Oh ◽  
Adnan Farooq ◽  
Eung Je Woo ◽  
...  

Electrical Impedance Tomography (EIT) is a very attractive functional imaging method despite the low sensitivity and resolution. The use of internal electrodes with the conventional reconstruction algorithms was not enough to enhance image resolution and accuracy in the region of interest (ROI). We propose a local ROI imaging method with internal electrodes developed from careful analysis of the sensitivity matrix that is designed to reduce the sensitivity of the voxels outside the local region and optimize the sensitivity of the voxel inside the local region. We perform numerical simulations and physical measurements to demonstrate the localized EIT imaging method. In preliminary results with multiple objects we show the benefits of using an internal electrode and the improved resolution due to the local ROI image reconstruction method. The sensitivity is further increased by allowing the surface electrodes to be unevenly spaced with a higher density of surface electrodes near the ROI. Also, we analyse how much the image quality is improved using several performance parameters for comparison. While these have not yet been studied in depth, it convincingly shows an improvement in local sensitivity in images obtained with an internal electrode in comparison to a standard reconstruction method.


2019 ◽  
Vol 8 (1) ◽  
pp. 66-78 ◽  
Author(s):  
Venkatratnam Chitturi ◽  
Nagi Farrukh

Abstract Electrical impedance tomography (EIT) is a relatively new imaging technique. It has the advantages of low cost, portability, non-invasiveness and is free from radiation effects. So far, this imaging technique has shown satisfactory results in functional imaging. However, it is not yet fully suitable for anatomical imaging due to its poor spatial resolution. In this paper, we review the basic directions of research in the area of the spatial resolution of the EIT systems. The improvements to the hardware and the software developments are highlighted. Finally, possible techniques to enhance the spatial resolution of the EIT systems using array processing beamforming methods are discussed.


Sign in / Sign up

Export Citation Format

Share Document