Computational Tool for Analysis of Strains Based on Optical Flow Approach

2020 ◽  
Author(s):  
Andriy Dashkevich ◽  
Oleksii Vodka
Keyword(s):  
Optical Flow ◽  
Computational Tool

Motion correction in PET/CT

2005 ◽  
Vol 44 (S 01) ◽  
pp. S46-S50 ◽  
Author(s):  
M. Dawood ◽  
N. Lang ◽  
F. Büther ◽  
M. Schäfers ◽  
O. Schober ◽  
...  
Keyword(s):  
Optical Flow ◽  
Motion Correction ◽  
Motion Vector ◽  
Emission Tomography ◽  
Cardiac Pet ◽  
Novel Approach ◽  
Positron Emission ◽  
Pet Ct ◽  
Flow Algorithm ◽  
Motion Vector Field

Summary:Motion in PET/CT leads to artifacts in the reconstructed PET images due to the different acquisition times of positron emission tomography and computed tomography. The effect of motion on cardiac PET/CT images is evaluated in this study and a novel approach for motion correction based on optical flow methods is outlined. The Lukas-Kanade optical flow algorithm is used to calculate the motion vector field on both simulated phantom data as well as measured human PET data. The motion of the myocardium is corrected by non-linear registration techniques and results are compared to uncorrected images.

Locating Method for Vehicle at Intersection Based on TPVM and Optical Flow

CICTP 2020 ◽  
2020 ◽  
Author(s):  
Tao Chen ◽  
Linkun Fan ◽  
Xuchuan Li ◽  
Congshuai Guo ◽  
Miaomiao Qiao
Keyword(s):  
Optical Flow

CAD Of Anticorrosive Protection Of Steel Structures

2019 ◽  
pp. 18-23
Keyword(s):  
Protective Coating ◽  
Computer Aided Design ◽  
Steel Structures ◽  
Cost Effective ◽  
Operating Conditions ◽  
Computational Tool ◽  
Protection Method ◽  
Cost Effective Method ◽  
The Cost ◽  
Aided Design

The choice of cost-effective method of anticorrosive protection of steel structures is an urgent and time consuming task, considering the significant number of protection ways, differing from each other in the complex of technological, physical, chemical and economic characteristics. To reduce the complexity of solving this problem, the author proposes a computational tool that can be considered as a subsystem of computer-aided design and used at the stage of variant and detailed design of steel structures. As a criterion of the effectiveness of the anti-corrosion protection method, the cost of the protective coating during the service life is accepted. The analysis of existing methods of steel protection against corrosion is performed, the possibility of their use for the protection of the most common steel structures is established, as well as the estimated period of effective operation of the coating. The developed computational tool makes it possible to choose the best method of protection of steel structures against corrosion, taking into account the operating conditions of the protected structure and the possibility of using a protective coating.

VISUAL DESIGN TOOL FOR ELECTROSTATIC LELSES

2014 ◽  
Vol 5 (2) ◽  
pp. 778-789
Author(s):  
Hassan Nouri Al-Obaidi ◽  
Ali A. Rashead Al-Azawy
Keyword(s):  
Programming Languages ◽  
Electrostatic Potential ◽  
Electric Energy ◽  
Visual Basic ◽  
Visual Programming ◽  
Design Tool ◽  
Mesh Point ◽  
Visual Design ◽  
Computational Tool ◽  
Electrostatic Lenses

Current research presents a visual-computational tool to design and investigate round electrostatic lenses in sense of analysis procedure. The finite elements methods is adopted to find the electrostatic potential in the lens region. Laplace’s equation is first replaced by a certain functional which physically represent the electric energy stored in the electric field. This functional is then minimized at each mesh point with respect to the nearest eight ones. This minimization process is proved to be entirely equivalent to solving Laplace’s equation. The requirement that the functional being minimized is then yields a set of nine point equations which inter relate the potentials at adjacent mesh points. Finally this set of equations is solved to find the electrostatic potential at each mesh point in the region of the lens under consideration. The procedure steps mention above are coded to program written in visual basic. Hence an interface tool for analyzing and designing electrostatic lenses has been built up. Designing results proved that the introduced tools has an excellent outputs in comparison with the others written in not visual programming languages. Furthermore it easier for researchers and designer to use such a tool over their counterpart ones.

Wavelet-based Optical Flow Velocimetry (wOFV) Applied to Tagging Velocimetry Data

2021 ◽  
Author(s):  
Tobin Gevelber ◽  
Bryan E. Schmidt ◽  
Muhammad A. Mustafa ◽  
David Shekhtman ◽  
Nick J. Parziale
Keyword(s):  
Optical Flow ◽  
Flow Velocimetry
Sign in / Sign up

Export Citation Format

Share Document