PurposeThis paper aims to investigate the performance of two novel direct torque control (DTC) schemes dedicated to three-switch three-phase inverter (B3-VSI), also called delta inverter, fed induction motor (IM) drives.Design/methodology/approachThe principle of operation of the B3-VSI-fed IM drive is recalled in a first step. Then, the basis of both proposed DTC strategies is presented. The first DTC scheme considers a subdivision of the stationary plane into three sectors and the application of the intrinsic as well as virtual voltage vectors to achieve the control combinations. While, the second DTC scheme considers a subdivision of the stationary plane into six sectors and a limitation of the voltage vectors incorporated in the look-up table to the three intrinsic ones.FindingsSimulation and experimental results have revealed that, under steady-state operation and transient conditions, the harmonic content of the IM stator phase currents is lower in the case of the DTC2 strategy, resulting in a lower ripple of electromagnetic torque. Furthermore, it has led to a quasi-circular shape of the locus described by the stator flux vector in the stationary plane.Research limitations/implicationsThis work should be extended to the synthesis and performance analysis of a new DTC strategy for B3-VSI-fed IM drive, which emulates the operation of the conventional six-switch three-phase inverter-fed IM drive.Originality/valueThe limitation associated with the reduced number of the intrinsic voltage vectors generated by the B3-VSI has been eradicated, thanks to the suitable synthesis of the look-up table incorporated in the DTC scheme.
Direct Torque Control of Four Switch Three Phase Inverter fed Induction Motor Sensorless Speed Drive
