ABSTRACTWe report on direct measurements of surface potentials on cross sections of a-Si:H and a-SiGe:H n-i-p solar cells using scanning Kelvin probe microscopy. External bias voltage (Vb)induced changes in the electric field distributions in the i layer were further deduced by taking the derivative of the Vb-induced potential changes. This procedure avoids the effect of surface charges or surface Fermi-level pinning on the potential measurement. We found that the electric field does not distribute uniformly through the i layer of a-Si:H cells, but it is stronger in the regions near the n and p layers than in the middle of the i layer. The non-uniformity is reduced by incorporating buffer layers at the n/i and i/p interfaces in the a-Si:H solar cells. For a-SiGe:H solar cells, the electric field at the p side of the i layer is much stronger than at the n side and the middle. The non-uniformity becomes more severe when a profiled Ge content is incorporated with a high Ge content on the p side. We speculate that the increase in defect density with increasing of Ge content causes charge accumulation at the i/p interface.
Sample preparation for scanning Kelvin probe microscopy studies on cross sections of organic solar cells