<p>We have undertaken a journey to develop a small X-band radar based on widely available commercial off-the-shelf (COTS) components. We have evaluated various radar transmitters, antenna and radome designs and sizes and we are currently operating the second-largest radar network in Europe, spanning 5 countries and consisting of 30 radars.</p><p>The final solution can be deployed by a small team in two days and operated without supervision with negligible maintenance and recurring costs. With approximately 120 kilometers of effective range and high refresh rate, it might be a good fit as an early warning radar, for areas with no current radar coverage or to fill gaps in larger networks; however, due to some limitations of the X band, namely higher attenuation in spatially distributed rain, it may not be a replacement of long-range observation radars.</p><p>In this work, we present an overview of our undertakings, technical solutions we have chosen and problems we have encountered. First, we cover transmitter technology selection, and discuss advantages and disadvantages of currently available magnetron and solid-state transmitters. Then we show the evolution of our antenna design, from 1-dimensional slotted waveguide to parabolic antennas with tapered beam.&#160;</p><p>With large parabolic antennas, another problem arises: the mechanics of the radar cannot cope with the additional weight and angular momentum, thus we had to develop various mechanical supports and a custom rotator. This rotator can also tilt the antenna, effectively adding volumetric scanning; the tilting is also needed to cope with non-ideal radar locations, where the horizon is partially obscured, which are unfortunately common for a radar network with limited budget. Finally, we discuss design and material selection of our custom radomes, and present an overall experience with everyday running and maintaining the network.</p>
Development of a low-cost X-band meteorological radar