antenna array
Recently Published Documents


TOTAL DOCUMENTS

8699
(FIVE YEARS 2471)

H-INDEX

72
(FIVE YEARS 13)

Micromachines ◽  
2022 ◽  
Vol 13 (1) ◽  
pp. 136
Author(s):  
Jianlin Huang ◽  
Zhuoni Chen ◽  
Qibo Cai ◽  
Tian Hong Loh ◽  
Gui Liu

A multiple-input-multiple-output (MIMO) antenna array for triple-band 5G metal-frame smartphone applications is proposed in this paper. Each single antenna element consists of an S-shaped feeding strip and an L-shaped radiation strip on the metal frame. The dimension of the antenna element is only 6.5 mm × 7 mm (0.076 λ0 × 0.082 λ0, λ0 is the free-space wavelength at the frequency of 3.5 GHz). The −6 dB impedance bandwidth of the proposed eight-antenna array can cover 3.3–3.8 GHz, 4.8–5 GHz, and 5.15–5.925 GHz. The evolution design and the analysis of the optimal parameters for a single antenna element are derived to investigate the principle of the antenna. The measured total efficiency is larger than 70%. The measured isolation is better than 13 dB. The measurements of the prototype agree well with the simulation results.


2022 ◽  
Author(s):  
Cleofás Segura-Gómez ◽  
Ángel Palomares-Caballero ◽  
Pablo Padilla

This paper presents a vertically stacked SIW antenna array that enables different array configurations with the minimum number of SIW layers. This achievement lies in the modular feature offered by the proposed design. Specifically, 4 distinct array configurations can be produced with only 3 different design of SIW layers. Depending on the number of SIW layers employed in the stacked antenna, the directivity in the E-plane of radiation is modified. To obtain an equal and in-phase power distribution among the array elements, H- and E-plane corporate feeding networks are efficiently implemented in each array configuration. Array configurations of 1, 2, 4 and 8 radiating layers are offered by the proposed modular array, where each radiating layer is formed by 8 H-plane SIW horn antennas. The simulated directivity for the array configurations ranges from 15.8 dBi to 23.8 dBi and the main beam direction remains fixed along the operating frequency band. The array design has been manufactured and proper agreement between simulated and measured results are observed. The measured impedance bandwidth in all the array configurations is from 35 GHz to 41 GHz (15.79% bandwidth) with a reduction in the E-plane beamwidth as the number of radiating layers increases.


2022 ◽  
Vol 8 ◽  
Author(s):  
Xinmin Fu ◽  
Ya Fan ◽  
Yajuan Han ◽  
Jiafu Wang ◽  
Zhuangzhuang Wang ◽  
...  

The integration of the metasurface and antenna has brought new vitality to function integration and performance improvement for metasurfaces. In this study, we propose a radiation-scattering–integrated (RSI) design method of functional metasurfaces by incorporating antenna radiators into the substrates. The antenna radiators can also be considered as a band-stop frequency selective surface (FSS) embedded within the dielectric substrate, which adds up to the degree of freedom (DOF) in tailoring electromagnetic (EM) properties of the substrate. In this way, not only radiation function is added to the metasurfaces but also the original scattering-manipulation function is augmented. As an example, we apply this method to the design of a metasurface that can achieve a high radiation gain in-band and low-RCS out-of-band simultaneously. An antenna array was first designed, which uses circular patches as the radiators. Then, the antenna array was used as the substrate of a typical polarization conversion (PC) metasurface. The circular patch lies between the ground plane and the PC meta-atom, providing optimal electrical substrate thickness for PC at two separate bands. By adjusting structural parameters, the operating band of the antenna array can be made to lie in between the two PC bands. In this way, the metasurface can simultaneously possess high-gain radiation function in-band and high-efficiency PC function for RCS reduction out-of-band. A prototype was fabricated and measured. Both the simulated and measured results show that the metasurface can achieve satisfactory radiation gain in-band and significant RCS reduction out of band. This work provides an alternative method of designing multi-functional metasurfaces, which may find applications in smart skins and others.


Author(s):  
Haoran Zhang ◽  
Yiming Yang ◽  
Jiahao Zhou ◽  
Atif Shamim

This paper presents a compact and wearable frequency-modulated continuous-wave (FMCW) radar on a semi-flexible printed circuit board (PCB) for an anti-collision system. This can enable visually impaired people to perceive their environment better and more safely in their everyday lives. In the proposed design, a multiple-input multiple-output (MIMO) antenna array with four receivers (RXs) and three transmitters (TXs) has been designed to achieve obstacle-detection ability in both horizontal and vertical planes through a specific geometrical configuration. Operating at 76–81 GHz, an aperture coupled wide-beam patch antenna with two parasitic patches is proposed for each channel of RXs and TXs. The fast Fourier transform (FFT) algorithm has been implemented in the radar chip AWR1843 for intermediate frequency (IF) signals to generate a range-Doppler map and search precise target angles in high sensitivity. The complete system, which includes both the MIMO antenna array and the radar chip circuit, is utilized on a six-layer semi-flexible PCB to ensure compactness and ease in wearability. Field testing of the complete system has been performed, and an obstacle-detection range of 7 m (for humans) and 19 m (for larger objects) has been obtained. A wide angular detection range of 64-degree broadside view (±32°) has also been achieved. A voice module has also been integrated to deliver the obstacle’s range and angle information to visually impaired persons.


Electronics ◽  
2022 ◽  
Vol 11 (2) ◽  
pp. 208
Author(s):  
Oluwole John Famoriji ◽  
Thokozani Shongwe

Direction-of-arrival (DoA) estimation of electromagnetic (EM) waves impinging on a spherical antenna array in short time windows is examined in this paper. Reflected EM signals due to non-line-of-sight propagation measured with a spherical antenna array can be coherent and/or highly correlated in a snapshot. This makes spectral-based methods inefficient. Spectral methods, such as maximum likelihood (ML) methods, multiple signal classification (MUSIC), and beamforming methods, are theoretically and systematically investigated in this study. MUSIC is an approach used for frequency estimation and radio direction finding, ML is a technique used for estimating the parameters of an assumed probability distribution for given observed data, and PWD applies a Fourier transform to the capture response and produces them in the frequency domain. Although they have been previously adapted and used to estimate DoA of EM signals impinging on linear and planar antenna array configurations, this paper investigates their suitability and effectiveness for a spherical antenna array. Various computer simulations were conducted, and plots of root-mean-square error (RMSE) against the square root of the Cramér–Rao lower bound (CRLB) were generated and used to evaluate the performance of each method. Numerical experiments and results from measured data show the degree of appropriateness and efficiency of each method. For instance, the techniques exhibit identical performance to that in the wideband scenario when the frequency f = 8 GHz, f = 16 GHz, and f = 32 GHz, but f = 16 GHz performs best. This indicates that the difference between the covariance matrix of the signal is coherent and that the steering vectors of signals impinging from that angle are small. MUSIC and PWD share the same problems in the single-frequency scenario as in the wideband scenario when the delay sample d = 0. Consequently, the DoA estimation obtained with ML techniques is more suitable, less biased, and more robust against noise than beamforming and MUSIC techniques. In addition, deterministic ML (DML) and weighted subspace fitting (WSF) techniques show better DoA estimation performance than the stochastic ML (SML) technique. For a large number of snapshots, WSF is a better choice because it is more computationally efficient than DML. Finally, the results obtained indicate that WSF and ML methods perform better than MUSIC and PWD for the coherent or partially correlated signals studied.


2022 ◽  
Vol 72 (1) ◽  
pp. 67-72
Author(s):  
Anil Kumar Yerrola ◽  
Maifuz Ali ◽  
Ravi Kumar Arya ◽  
Lakhindar Murmu ◽  
Ashwani Kumar

In millimeter-wave (mmWave) communications, the antenna gain is a crucial parameter to overcome path loss and atmospheric attenuation. This work presents the design of two cylindrical conformal antenna arrays, made of modified rectangular microstrip patch antenna as a radiating element, working at 28 GHz for mmWave applications providing high gain and beam steering capability. The microstrip patch antenna element uses Rogers RO4232 substrate with a thickness of 0.5 mm and surface area of 5.8 mm × 5.8 mm. The individual antenna element provides a gain of 6.9 dBi with return loss bandwidth of 5.12 GHz. The first antenna array, made by using five conformal antenna elements, achieves a uniform gain of approximately 12 dBi with minimal scan loss for extensive scan angles. In the second antenna array, a dielectric superstrate using Rogers TMM (10i) was used to modify the first antenna array. It enhanced the gain to approximately 16 dBi while still maintaining low scan loss for wide angles. The proposed array design method is very robust and can be applied to any conformal surface. The mathematical equations are also provided to derive the array design, and both array designs are verified by using full-wave simulations.


2022 ◽  
Vol 2022 ◽  
pp. 1-1
Author(s):  
Saad Hassan Kiani ◽  
Xin Cheng Ren ◽  
Adil Bashir ◽  
Muhammad Rizwan Anjum ◽  
Ammar Rafiq ◽  
...  
Keyword(s):  


Sign in / Sign up

Export Citation Format

Share Document