A 1 $\times$ 2 Dual-Band Antenna Array for Radio-Frequency Identification (RFID) Handheld Reader Applications

2014 ◽  
Vol 62 (10) ◽  
pp. 5260-5267 ◽  
Author(s):  
Heng-Tung Hsu ◽  
Ting-Jui Huang
Keyword(s):  
Radio Frequency ◽  
Antenna Array ◽  
Radio Frequency Identification ◽  
Dual Band ◽  
Dual Band Antenna ◽  
Frequency Identification

scholarly journals Dual-Band Antenna/AMC Combination for RFID

2012 ◽  
Vol 2012 ◽  
pp. 1-7 ◽  
Author(s):  
M. E. de Cos ◽  
F. Las-Heras
Keyword(s):  
Radio Frequency ◽  
Radio Frequency Identification ◽  
Return Loss ◽  
Dual Band ◽  
Rfid Tags ◽  
Metallic Plate ◽  
Magnetic Conductor ◽  
Dual Band Antenna ◽  
Radiation Properties ◽  
Frequency Identification

A novel antenna/Artificial Magnetic Conductor (AMC) combination usable in dual-band Radio Frequency Identification (RFID) tags over metallic objects is presented. A compact and low thickness prototype is manufactured and characterized in terms of return loss and radiation properties in an anechoic chamber both alone and on a metallic plate. The performance exhibited by the presented antenna/AMC prototype is proper for RFID tags on both metallic and nonmetallic objects.

scholarly journals Compact Dual-Band Circularly Polarized Stacked Patch Antenna for Microwave-Radio-Frequency Identification Multiple-Input-Multiple-Output Application

2021 ◽  
Vol 2021 ◽  
pp. 1-13
Author(s):  
Enze Zhang ◽  
Andrea Michel ◽  
Paolo Nepa ◽  
Jinghui Qiu
Keyword(s):  
Radio Frequency ◽  
Radio Frequency Identification ◽  
Patch Antenna ◽  
Multiple Input Multiple Output ◽  
Dual Band ◽  
Circularly Polarized ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Frequency Identification ◽  
Stacked Patch Antenna

A compact, low-profile, two-port dual-band circularly polarized (CP) stacked patch antenna for radio-frequency identification (RFID) multiple-input-multiple-output (MIMO) readers is proposed, which employs the shared-aperture technique. The proposed antenna adopts a 1.524 mm thickness Rogers Ro4350b substrate with relative permittivity of 3.48. Two pairs of isolated ports are working at two microwave- (MW-) RFID bands (2.4–2.485 GHz and 5.725–5.875 GHz) with high port isolation of 25 dB and 30 dB, respectively. A shared metal slot layer is designed to separate two feeding structures of the lower band and upper band for port isolation enhancement as well as saving space. Corner-truncated square slot and patch configurations have been designed to obtain CP modes. In the lower and upper MW-RFID bands, the relative impedance bandwidths are 12.2% and 5.7%, and the maximum realized gains are higher than 7.3 dBic. Moreover, two-element configurations have been combined for an RFID MIMO system that occupies a dimension of 119 mm × 119 mm × 12.9 mm. The MIMO antenna performance of envelope correlation coefficient (ECC) is lower than 0.03, and diversity gain is close to 10 dB.

Dual-Band Platform Tolerant Antennas for Radio-Frequency Identification

2006 ◽  
Vol 54 (9) ◽  
pp. 2632-2637 ◽  
Author(s):  
M. Hirvonen ◽  
K. Jaakkola ◽  
P. Pursula ◽  
J. Saily
Keyword(s):  
Radio Frequency ◽  
Radio Frequency Identification ◽  
Dual Band ◽  
Frequency Identification

scholarly journals Dual-band Dipole Antenna for 2.45 GHz and 5.8 GHz RFID Tag Application

2015 ◽  
Vol 4 (1) ◽  
pp. 31 ◽  
Author(s):  
Y. Yu ◽  
J. Ni ◽  
Z. Xu
Keyword(s):  
Radio Frequency ◽  
Radio Frequency Identification ◽  
Input Impedance ◽  
Return Loss ◽  
Dipole Antenna ◽  
Dual Band ◽  
Radiation Characteristics ◽  
Rfid Tag ◽  
Microstrip Patch ◽  
Frequency Identification

In this paper, a dual-band dipole antenna for passive radio frequency identification (RFID) tag application at 2.45 GHz and 5.8 GHz is designed and optimized using HFSS 13. The proposed antenna is composed of a bent microstrip patch and a coupled rectangular microstrip patch. The optimal results of this antenna are obtained by sweeping antenna parameters. Its return losses reach to -18.7732 dB and -18.2514 dB at 2.45 GHz and 5.8 GHz, respectively. The bandwidths (Return loss <=-10 dB) are 2.42~2.50 GHz and 5.77~5.82 GHz. And the relative bandwidths are 3.3% and 0.9%. It shows good impedance, gain, and radiation characteristics for both bands of interest. Besides, the input impedance of the proposed antenna may be tuned flexibly to conjugate-match to that of the IC chip.

Sign in / Sign up

Export Citation Format

Share Document