A new technique to realize quasi-elliptic bandpass filters with extreme close-in rejection is presented in this paper. The basic idea consists of embedding non-resonating mode waveguide cavities within the structure of an evanescent-mode filter. Such a combination of cavities and resonators allows the generation of very close transmission zeros while realizing at the same time relatively wide passbands and stopbands. Both H-plane TE201 mode and E-plane TM110 mode configurations are used as non-resonating mode waveguide cavities. In contrast with the other elliptic evanescent-mode filters using conventional approaches, the insertion loss degradation at the filter cut-off frequencies is minimized thanks to the high-Q factor of the waveguide cavities, whose corresponding poles are located right at the edges of the passband. The experimental results of an evanescent-mode filter having 9.950–11.000 GHz passband and providing more than 45 dB rejection between 11.040 and 11.050 GHz validate the proposed solution.
Increasing Peak Power Handling in Microstrip Bandpass Filters by Using Rounded-End Resonators