Power attenuation from restricting range of motion is minimized in subjects with fast RTD and following isometric training

Time-dependent measures consisting of rate of torque development (RTD), rate of velocity development (RVD), and rate of neuromuscular activation can be used to evaluate explosive muscular performance, which becomes critical when performing movements throughout limited ranges of motion (ROM). Using a HUMAC NORM dynamometer, seven males (27 ± 7 years) and six females (22 ± 3 years) underwent 8 weeks of maximal isometric dorsiflexion training 3 days/week. One leg was trained at 0° (short-muscle tendon unit (MTU) length) and the other at 40° of plantar flexion (long-MTU length). RTD and rate of neuromuscular activation were evaluated during 'fast' maximal isometric contractions. Power, RVD, and rate of neuromuscular activation were assessed during maximal isotonic contractions in four conditions (small (40° to 30° of plantar flexion) ROM at 10 and 50% MVC; large (40° to 0° of plantar flexion) ROM at 10 and 50% MVC) for both legs, pre- and post-training. Despite no change in rate of neuromuscular activation following training, peak power, RTD, and RVD increased at both MTU lengths (p < 0.05). Strong relationships (R2=0.73) were observed between RTD and peak power in the small ROM, indicating that fast time-dependent measures are critical for optimal performance when ROM is constrained. Meanwhile, strong relationships (R2=0.90) between RVD and power were observed at the 50% load, indicating that RVD is critical when limited by load and ROM is not confined. Maximal isometric dorsiflexion training can be used to improve time-dependent measures (RTD, RVD) to minimize power attenuation when ROM is restricted.

Progress in researching the implosion of nested arrays of mixed composition and the generation of soft X-ray power pulse

The results of experiments on the study of plasma compression of nested wire arrays of mixed composition and the generation of powerful pulses of soft X-ray radiation (SXR), carried out on a powerful electrophysical facility Angara-5-1 at a current level of up to 3 MA, are presented. Based on the latest experimental data on the intensity of plasma formation of various substances m& (in μg/(cm2×ns)) [1] and on the features of the dynamics of plasma compression in nested arrays [2], a nested wire array design has been developed which makes it possible to obtain a high peak SXR power in comparison with the known designs of single and nested tungsten wire arrays. During the implosion of nested arrays of mixed composition, consisting of plastic fibers and tungsten wires, shorter and more powerful SXR pulses were obtained with a maximum peak power PSXRmax~10 TW with a FWHM duration of ~5 ns compared to the parameters of SXR pulses upon compression of single tungsten arrays: PSXRmax~5 TW and FWHM~10 ns. Thus, under the conditions of our experiments, we have shown the possibility of a twofold increase in the peak SXR power during compression of nested arrays by optimizing their design.

A comparative study of an Yb-doped fiber gain-managed nonlinear amplifier seeded by femtosecond fiber lasers

In this work, we show that the nonlinear evolution of femtosecond seed pulses with different parameters (temporal and spectral shapes, repetition rate, pulse energy) in an Yb-fiber amplifier leads to gain-managed nonlinear amplification, enabling robust generation of high-peak-power and nearly transform-limited pulses after external compression. We demonstrate a compressed pulse duration of 33 fs with an energy of 80.5 nJ and a peak power of 2.29 MW for a source with a repetition rate of 30 MHz. For a second seed source with a repetition rate of 125 MHz, we obtained a pulse duration of 51 fs with an energy of 22.8 nJ and a peak power of 420 kW. Numerical simulations incorporating rate equations and nonlinear propagation in the amplifier provide evolutions that agree well with the experimental results. The discrepancies in the amplifier’s absorption edge appearing at low repetition rates and higher pump powers are attributed to the temperature dependence of the amplifier’s gain cross-sections. Here, we experimentally verify this attribution and thus underline the importance of accounting for the fiber core temperature for precise modelling of the short-wavelength spectral edge of the output pulses in nonlinear Yb-fiber amplifiers. We also measure, for the first time, the relative intensity noise of an amplifier operating in the gain-managed nonlinear regime. The measurements reveal a significant contribution of the amplification process to the overall output noise of the system.

Cavity-dumped nanosecond Cr:LiSAF laser in the 985–1030 nm region for versatile seeding of Yb-based amplifiers

We report nanosecond (ns) cavity-dumped operation of a low-cost diode-pumped Cr:LiSAF laser around 1000 nm. The system is pumped with one 1-W single-emitter multimode diode at 665 nm. A Pockell cell (PC) and thin-film-polarizer (TFP) combination placed inside the cavity chops up an adjustable portion of the intracavity power and creates a variable time-dependent output coupler. Via adjusting the length and magnitude of the electrical signal going into the PC, output pulses with pulsewidths in the 2.5–500 ns range and with peak power levels above 10 W are generated at repetition rates up to 100 kHz. The central wavelength of the pulses could be smoothly tuned in the 985–1030 nm region, and is only limited by the anti-reflection coating bandwidth of the current PC and TFP. This versatile nanosecond source with 100 nJ level energies could serve as an attractive low-cost seed source for Yb-based amplifiers, including the cryogenic Yb:YLF systems.

Effects of Pre-Term Birth on the Cardio-Respiratory Responses to Hypoxic Exercise in Children

Pre-term birth is associated with numerous cardio-respiratory sequelae in children. Whether these impairments impact the responses to exercise in normoxia or hypoxia remains to be established. Fourteen prematurely-born (PREM) (Mean ± SD; gestational age 29 ± 2 weeks; age 9.5 ± 0.3 years), and 15 full-term children (CONT) (gestational age 39 ± 1 weeks; age 9.7 ± 0.9 years), underwent incremental exercise tests to exhaustion in normoxia (FiO2 = 20.9%) and normobaric hypoxia (FiO2 = 13.2%) on a cycle ergometer. Cardio-respiratory variables were measured throughout. Peak power output was higher in normoxia than hypoxia (103 ± 17 vs. 77 ± 18 W; p < 0.001), with no difference between CONT and PREM (94 ± 23 vs. 86 ± 19 W; p = 0.154). V̇O2peak was higher in normoxia than hypoxia in CONT (50.8 ± 7.2 vs. 43.8 ± 9.9 mL·kg−1·min−1; p < 0.001) but not in PREM (48.1 ± 7.5 vs. 45.0 ± 6.8 mL·kg−1·min−1; p = 0.137; interaction p = 0.044). Higher peak heart rate (187 ± 11 vs. 180 ± 10 bpm; p = 0.005) and lower stroke volume (72 ± 13 vs. 77 ± 14 mL; p = 0.004) were observed in normoxia versus hypoxia in CONT, with no such differences in PREM (p = 0.218 and > 0.999, respectively). In conclusion, premature birth does not appear to exacerbate the negative effect of hypoxia on exercise capacity in children. Further research is warranted to identify whether prematurity elicits a protective effect, and to clarify the potential underlying mechanisms.

Stable continuous-wave mode-locked laser from a 1645 nm Er:YAG ceramic oscillator

We demonstrate stable continuous-wave mode-locking (CWML) pulses around 1645nm by employing the home-made Er:YAG ceramic. By using a fiber laser and semiconductor saturable absorber mirror (SESAM) with modulation depth of 1.2%, we get ML pulses with the output average power up to 815 mW, the pulse width shortened as ~4 ps, and the peak power of 1.8 kW. With the SESAM of modulation depth of 2.4%, the second-order harmonic ML pulses were also obtained. As far as we know, this is the first report of CWML from Er3+-doped ceramics and also the shortest pulse duration in Er3+-doped solid-state oscillators.

Eucalyptus Leaves as Potential Indicators of Gold Mine in Indonesia

Eucalyptus is a plant that is able to absorb gold (Au) particles from the soil and store them in the leaves. Eucalyptus roots have the ability to penetrate the soil of the calcrete zone, which is rich in the mineral calcium (Ca). Calcium is a chemical element with the symbol Ca and atomic number 20. As an alkaline earth metal, calcium is a reactive metal that forms a dark oxide-nitride layer when exposed to air. and contains Au particles as impurities, making this plant a potential natural indicator (biogeochemical) of potential Au metal mining. The Au content in eucalyptus leaves can be determined by using the XRF (X-Ray Fluorescence) instrumentation material analysis method for qualitative analysis and AAS (Atomic Absorption Spectroscopy) for quantitative results. The form of XRF characterization of the intensity versus energy spectrum of certain elements from the XRF analysis results obtained is a spectrum with a peak power of 9.731 keV which indicates the presence of Au metal in the sample. The results obtained qualitatively are the Au metal content in the eucalyptus leaf sample of (9.0 ± 0.5) ppm. However, the Au metal content in each leaf sample was different. This provides information that Eucalyptus from different plants has the potential to be a biogeochemical indicator of potential Au metal mining in Indonesia