Energy management of vehicle electrical system with auxiliary power unit

Author(s):  
M. Kabisch ◽  
M. Heuer ◽  
G. Heideck ◽  
Z.A. Styczynski
2018 ◽  
Vol 10 (10) ◽  
pp. 3758 ◽  
Author(s):  
Shaobo Xie ◽  
Xiaosong Hu ◽  
Kun Lang ◽  
Shanwei Qi ◽  
Tong Liu

Pontryagin’s Minimum Principle (PMP) has a significant computational advantage over dynamic programming for energy management issues of hybrid electric vehicles. However, minimizing the total energy consumption for a plug-in hybrid electric vehicle based on PMP is not always a two-point boundary value problem (TPBVP), as the optimal solution of a powering mode will be either a pure-electric driving mode or a hybrid discharging mode, depending on the trip distance. In this paper, based on a plug-in hybrid electric truck (PHET) equipped with an automatic mechanical transmission (AMT), we propose an integrated control strategy to flexibly identify the optimal powering mode in accordance with different trip lengths, where an electric-only-mode decision module is incorporated into the TPBVP by judging the auxiliary power unit state and the final battery state-of-charge (SOC) level. For the hybrid mode, the PMP-based energy management problem is converted to a normal TPBVP and solved by using a shooting method. Moreover, the energy management for the plug-in hybrid electric truck with an AMT involves simultaneously optimizing the power distribution between the auxiliary power unit (APU) and the battery, as well as the gear-shifting choice. The simulation results with long- and short-distance scenarios indicate the flexibility of the PMP-based strategy. Furthermore, the proposed control strategy is compared with dynamic programming (DP) and a rule-based charge-depleting and charge-sustaining (CD-CS) strategy to evaluate its performance in terms of computational accuracy and time efficiency.


Author(s):  
Ferry Setiawan ◽  
Yustina Titin Purwantiningsih ◽  
Dhimas Wicaksono

Penelitian ini bertujuan untuk merencanakan jadwal dan aktifitas maintenance yang yangefektif pada sistem auxiliary power unit sehingga tidak terjadi lagi kegagalan ataupun kerusakan yang tidak di rencanakan atau terjadi secara tiba – tiba. Kegagalan pada peralatan auxiliary power unit ada sering terjadi pada beberapa sistem kerja yaitu electrical system, Lubrication System dan Ignition System, di mana hal ini menimbulkan kerugian yang cukup besar bagi perusahaan penerbangan. Metode penelitian ini menggunakan pendekatan kualitatif dan kuantitatif, analisis kualitatif menggunakan metode Failure Mode Effect and Critically Analysis (FMECA) dengan menganalisis faktor – faktor penyebab kegagalan dan efek terjadinya kegagalan, dengan hasil penyebab kegagalan pada beberapa sitem kerja auxiliary power unit (APU) adalah sebagai berikut electrical system adalah pada komponen start Relay, Lubrication System adalah pada komponen Oil Filter, Ignition System adalah pada igniter plug. Dari hasil analisis FMECA tersebut di lakukan analisis kuantitatif dengan analisis dilakukan menggunakan metode reliability, parameter kehandalan dihitung dengan probabilitas distribusi Weibull, untuk menentukan batas kritis waktu operasional komponen ataupun part sistem yang merupakan batas kehandalan suatu sistem auxiliary power unit. Batas kritis operasional electrical system adalah sebesar 434 jam terbang, lubrication system adalah 1186 jam terbang, dan Ignition system adalah sebesar 1610 jam terbang, selanjutnya hasil tersebut di gunakan untuk menentukan jadwal maintenance yang efektif di dukung dengan perencanaan aktifitas maintenance yang tepat untuk menghilangkan penyebab – penyebab kegagalan pada peralalatan auxiliary power unit.


2009 ◽  
Vol 129 (2) ◽  
pp. 228-229
Author(s):  
Noboru Katayama ◽  
Hideyuki Kamiyama ◽  
Yusuke Kudo ◽  
Sumio Kogoshi ◽  
Takafumi Fukada

1989 ◽  
Author(s):  
DOUG MEYER ◽  
KENT WEBER ◽  
WALTER SCOTT

Sign in / Sign up

Export Citation Format

Share Document