A Finite Element Analysis of the Navier-Stokes Equations Applied to High Speed Thin Film Lubrication

1987 ◽  
Vol 109 (1) ◽  
pp. 71-76 ◽  
Author(s):  
J. O. Medwell ◽  
D. T. Gethin ◽  
C. Taylor
Keyword(s):  
Finite Element ◽  
High Speed ◽  
Stokes Equations ◽  
Three Dimensional ◽  
Navier Stokes ◽  
The Finite Element Method ◽  
Thin Film Lubrication ◽  
Element Analysis ◽  
Navier Stokes Equations ◽  
Film Lubrication

The performance of a cylindrical bore bearing fed by two axial grooves orthogonal to the load line is analyzed by solving the Navier-Stokes equations using the finite element method. This produces detailed information about the three-dimensional velocity and pressure field within the hydrodynamic film. It is also shown that the method may be applied to long bearing geometries where recirculatory flows occur and in which the governing equations are elliptic. As expected the analysis confirms that lubricant inertia does not affect bearing performance significantly.

Finite Element Analysis of Tsunami by Viscous Shallow-Water Equations

2012 ◽  
Vol 16 (4) ◽  
pp. 508-513
Author(s):  
Hiroshi Dan ◽  
◽  
Hiroshi Kanayama
Keyword(s):  
Finite Element ◽  
Shallow Water ◽  
Shallow Water Equations ◽  
Arrival Time ◽  
Stokes Equations ◽  
Three Dimensional ◽  
Navier Stokes ◽  
The Finite Element Method ◽  
Element Analysis ◽  
Navier Stokes Equations

In this paper, viscous shallow-water equations are derived from three-dimensional Navier-Stokes equations under the hydrostatic assumption. The viscous shallow-water equations are approximated by the finite element method based on our numerical scheme developed in 1978. This approach is used to simulate a tsunami in Hakata Bay. Results show a reasonable estimate of the tsunami arrival time.

Simulation of the subsonic flow in a high-speed centrifugal compressor impeller by the pressure-based method

1998 ◽  
Vol 212 (4) ◽  
pp. 269-287 ◽  
Author(s):  
Y Wang ◽  
S Komori
Keyword(s):  
High Speed ◽  
Compressible Flows ◽  
Incompressible Flows ◽  
Stokes Equations ◽  
Three Dimensional ◽  
Navier Stokes ◽  
Centrifugal Impeller ◽  
Navier Stokes Equations ◽  
Compressor Impeller ◽  
Collocated Grid

A pressure-based finite volume procedure developed previously for incompressible flows is extended to predict the three-dimensional compressible flow within a centrifugal impeller. In this procedure, the general curvilinear coordinate system is used and the collocated grid arrangement is adopted. Mass-averaging is used to close the instantaneous Navier-Stokes equations. The covariant velocity components are used as the main variables for the momentum equations, making the pressure-velocity coupling easier. The procedure is successfully applied to predict various compressible flows from subsonic to supersonic. With the aid of the k-ɛ turbulence model, the flow details within a centrifugal impeller are obtained using the present procedure. Predicted distributions of the meridional velocity and the static pressure are reasonable. Calculated radial velocities and flow angles are favourably compared with the measurements at the exit of the impeller.

Sign in / Sign up

Export Citation Format

Share Document