Design and Experimental Characterization of a High-Temperature Proton Exchange Membrane Fuel Cell Stack

2011 ◽  
Vol 8 (5) ◽  
Author(s):  
Robert Radu ◽  
Nicola Zuliani ◽  
Rodolfo Taccani
Keyword(s):  
Fuel Cells ◽  
High Temperature ◽  
Fuel Cell ◽  
Proton Exchange Membrane ◽  
Single Cells ◽  
Pem Fuel Cells ◽  
Proton Exchange ◽  
Pure Hydrogen ◽  
Exchange Membrane

Proton exchange membrane (PEM) fuel cells based on polybenzimidazole (PBI) polymers and phosphoric acid can be operated at temperature between 120 °C and 180 °C. Reactant humidification is not required and CO content up to 1% in the fuel can be tolerated, only marginally affecting performance. This is what makes high-temperature PEM (HTPEM) fuel cells very attractive, as low quality reformed hydrogen can be used and water management problems are avoided. From an experimental point of view, the major research effort up to now was dedicated to the development and study of high-temperature membranes, especially to development of acid-doped PBI type membranes. Some studies were dedicated to the experimental analysis of single cells and only very few to the development and characterization of high-temperature stacks. This work aims to provide more experimental data regarding high-temperature fuel cell stacks, operated with hydrogen but also with different types of reformates. The main design features and the performance curves obtained with a three-cell air-cooled stack are presented. The stack was tested on a broad temperature range, between 120 and 180 °C, with pure hydrogen and gas mixtures containing up to 2% of CO, simulating the output of a typical methanol reformer. With pure hydrogen, at 180 °C, the considered stack is able to deliver electrical power of 31 W at 1.8 V. With a mixture containing 2% of carbon monoxide, in the same conditions, the performance drops to 24 W. The tests demonstrated that the performance loss caused by operation with reformates, can be partially compensated by a higher stack temperature.

Degradation Effects on PEM Fuel Cells Supplied with Hydrogen from a LOHC System

2016 ◽  
Vol 839 ◽  
pp. 165-169 ◽  
Author(s):  
Thomas Luschtinetz ◽  
Andreas Sklarow ◽  
Johannes Gulden
Keyword(s):  
Fuel Cells ◽  
Fuel Cell ◽  
Proton Exchange Membrane ◽  
Pem Fuel Cell ◽  
Pem Fuel Cells ◽  
Proton Exchange ◽  
Pure Hydrogen ◽  
Exchange Membrane

Liquid organic hydrogen carriers (LOHC) are a promising form to store hydrogen. However, the process of dehydrogenation has to be demonstrated for applications with proton exchange membrane (PEM) fuel cells which require very pure hydrogen. Here we document the measured degradation effects due to CO contamination on a PEM fuel cell that is supplied with hydrogen from a LOHC and we want to use later in a maritime application.

Performance of a High Temperature Proton Exchange Membrane Fuel Cell (HT-PEMFC) Operating on Simulated Reformate

2015 ◽  
Author(s):  
Michael G. Waller ◽  
Mark R. Walluk ◽  
Thomas A. Trabold
Keyword(s):  
Fuel Cells ◽  
High Temperature ◽  
Fuel Cell ◽  
System Design ◽  
Proton Exchange Membrane ◽  
Pem Fuel Cells ◽  
Proton Exchange ◽  
Fuel Reforming ◽  
Exchange Membrane ◽  
High Temperature Pem

Conventional proton exchange membrane (PEM) fuel cell systems suffer from requiring high purity hydrogen, necessitating a costly on-board hydrogen storage tank to be incorporated into the overall system design. One method to overcome this barrier is to use an on-board reforming system fueled by some sort of hydrocarbon. Unfortunately though, most fuel reforming processes generate significant amounts of impurities, such as CO and CO2, requiring a costly and complex upfront reforming system that is unwieldy for a practical system. High temperature PEM fuel cells based on acid doped polybenzimidazole (PBI), are capable of operating on lower quality reformed hydrogen, allowing for a simplified on-board fuel reforming system design to be envisioned. Advances in high temperature PEM fuel cells have progressed to the point where they are now a commercially viable technology. However, there remains a lack of published literature on the performance of HT-PEMFCs operating on common reformate effluent compositions consisting primarily of H2, CO, CO2, and N2. In this work, the performance of PBI-based HT-PEMFCs are evaluated under simulated reformate compositions.

scholarly journals Recent Progress in the Development of Composite Membranes Based on Polybenzimidazole for High Temperature Proton Exchange Membrane (PEM) Fuel Cell Applications

Polymers ◽  
2020 ◽  
Vol 12 (9) ◽  
pp. 1861 ◽  
Author(s):  
Jorge Escorihuela ◽  
Jessica Olvera-Mancilla ◽  
Larissa Alexandrova ◽  
L. Felipe del Castillo ◽  
Vicente Compañ
Keyword(s):  
Fuel Cells ◽  
High Temperature ◽  
Fuel Cell ◽  
Alternative Energy ◽  
Proton Exchange Membrane ◽  
Composite Membranes ◽  
Pem Fuel Cell ◽  
Pem Fuel Cells ◽  
Proton Exchange ◽  
Exchange Membrane

The rapid increasing of the population in combination with the emergence of new energy-consuming technologies has risen worldwide total energy consumption towards unprecedent values. Furthermore, fossil fuel reserves are running out very quickly and the polluting greenhouse gases emitted during their utilization need to be reduced. In this scenario, a few alternative energy sources have been proposed and, among these, proton exchange membrane (PEM) fuel cells are promising. Recently, polybenzimidazole-based polymers, featuring high chemical and thermal stability, in combination with fillers that can regulate the proton mobility, have attracted tremendous attention for their roles as PEMs in fuel cells. Recent advances in composite membranes based on polybenzimidazole (PBI) for high temperature PEM fuel cell applications are summarized and highlighted in this review. In addition, the challenges, future trends, and prospects of composite membranes based on PBI for solid electrolytes are also discussed.

Submicro-pore containing poly(ether sulfones)/polyvinylpyrrolidone membranes for high-temperature fuel cell applications

2015 ◽  
Vol 3 (16) ◽  
pp. 8847-8854 ◽  
Author(s):  
Zhibin Guo ◽  
Ruijie Xiu ◽  
Shanfu Lu ◽  
Xin Xu ◽  
Shichun Yang ◽  
...  
Keyword(s):  
Fuel Cells ◽  
High Temperature ◽  
Fuel Cell ◽  
Proton Exchange Membrane ◽  
Proton Exchange ◽  
Exchange Membrane

A novel submicro-pore containing proton exchange membrane is designed and fabricated for application in high-temperature fuel cells.

Synthesis and characterization of para- and meta-polybenzimidazoles for high-temperature proton exchange membrane fuel cells

2014 ◽  
Vol 26 (4) ◽  
pp. 436-444 ◽  
Author(s):  
Marek Malinowski ◽  
Agnieszka Iwan ◽  
Grzegorz Paściak ◽  
Kacper Parafiniuk ◽  
Lech Gorecki
Keyword(s):  
Fuel Cells ◽  
High Temperature ◽  
Proton Exchange Membrane ◽  
Proton Exchange ◽  
Synthesis And Characterization ◽  
Exchange Membrane

Component Failure Analysis From the U.S. Army ERDC-CERL Residential Proton Exchange Membrane Fuel Cells Demonstration

2006 ◽  
Author(s):  
Scott A. Kenner ◽  
Nicholas M. Josefik ◽  
Scott M. Lux ◽  
James L. Knight ◽  
Melissa K. White ◽  
...  
Keyword(s):  
Fuel Cells ◽  
Fuel Cell ◽  
Proton Exchange Membrane ◽  
Pem Fuel Cells ◽  
Proton Exchange ◽  
Fuel Cell Stack ◽  
The Mean ◽  
Exchange Membrane ◽  
Mean Time ◽  
The U.S

Background: The U.S. Army Engineer Research and Development Center, Construction Engineering Research Laboratory (ERDC-CERL) continues to manage The Department of Defense (DoD) Residential Proton Exchange Membrane (PEM) Fuel Cell Demonstration Project. This project was funded by the United States Congress for fiscal years 2001 through 2004. A fleet of 91 residential-scale PEM fuel cells, ranging in size from 1 to 5 kW, has been demonstrated at various U.S. DoD facilities around the world. Approach: The performance of the fuel cells has been monitored over a 12-month field demonstration period. A detailed analysis has been performed cataloging the component failures, investigating the mean time of the failures, and the mean time between failures. A discussion of the lifespan and failure modes of selected fuel cell components, based on component type, age, and usage will be provided. This analysis also addresses fuel cell stack life for both primary and back-up power systems. Several fuels were used throughout the demonstration, including natural gas, propane, and hydrogen. A distinction will be made on any variances in performance based on the input fuel stock. Summary: This analysis will provide an overview of the ERDC-CERL PEM demonstration fuel cell applications and the corresponding data from the field demonstrations. Special emphasis will be placed on the components, fuel cell stack life, and input fuel characteristics of the systems demonstrated.

Alloys that form conductive and passivating oxides for proton exchange membrane fuel cell bipolar plates

2004 ◽  
Vol 19 (6) ◽  
pp. 1723-1729 ◽  
Author(s):  
Neil Aukland ◽  
Abdellah Boudina ◽  
David S. Eddy ◽  
Joseph V. Mantese ◽  
Margarita P. Thompson ◽  
...  
Keyword(s):  
Fuel Cells ◽  
Fuel Cell ◽  
Proton Exchange Membrane ◽  
Oxide Films ◽  
Pem Fuel Cell ◽  
Pem Fuel Cells ◽  
Proton Exchange ◽  
Bipolar Plates ◽  
Concentrated Solutions ◽  
Exchange Membrane

During the operation of proton exchange membrane (PEM) fuel cells, a high-resistance oxide is often formed on the cathode surface of base metal bipolar plates. Over time, this corrosion mechanism leads to a drop in fuel cell efficiency and potentially to complete failure. To address this problem, we have developed alloys capable of forming oxides that are both conductive and chemically stable under PEM fuel cell operating conditions. Five alloys of titanium with tantalum or niobium were investigated. The oxides were formed on the alloys by cyclic voltammetry in solutions mimicking the cathode- and anode-side environment of a PEM fuel cell. The oxides of all tested alloys had lower surface resistance than the oxide of pure titanium. We also investigated the chemical durability of Ti–Nb and Ti–Ta alloys in more concentrated solutions beyond those typically found in PEM fuel cells. The oxide films formed on Ti–Nb and Ti–Ta alloys remained conductive and chemically stable in these concentrated solutions. The stability of the oxide films was evaluated; Ti alloys having 3% Ta and Nb were identified as potential candidates for bipolar plate materials.

Thermodynamic Analysis of the Performance of an Irreversible PEMFC

2018 ◽  
Vol 388 ◽  
pp. 350-360 ◽  
Author(s):  
Chang Jie Li ◽  
Ye Liu ◽  
Zhe Shu Ma
Keyword(s):  
Fuel Cells ◽  
Fuel Cell ◽  
Proton Exchange Membrane ◽  
Pem Fuel Cells ◽  
Proton Exchange ◽  
Operating Conditions ◽  
Operating Pressure ◽  
Controllable Factors ◽  
Temperature Operating ◽  
Exchange Membrane

An irreversible model of proton exchange membrane fuel cells working at steady-state is established, in which the irreversibility resulting from overpotentials, internal currents and leakage currents are taken into account．In this paper, the irreversibility of fuel cell is expounded mainly from electrochemistry. The general performance characteristic curves are generated including output voltage, output power and output efficiency. In addition, the irreversibility of a class of PEMFC is studied by changing the operating conditions (controllable factors) of the fuel cell, including effect of operating temperature, operating pressure and leakage current. The results provide a theoretical basis for both the operation and optimal design of real PEM fuel cells．

MODELING OF PEM FUEL CELLS WITH FINITE-THICKNESS CATALYSTS

2009 ◽  
Vol 23 (03) ◽  
pp. 537-540 ◽  
Author(s):  
JIANG HUI YIN ◽  
JUN CAO
Keyword(s):  
Fuel Cells ◽  
Fuel Cell ◽  
Performance Optimization ◽  
Proton Exchange Membrane ◽  
Cell Model ◽  
Finite Thickness ◽  
Pem Fuel Cells ◽  
Proton Exchange ◽  
And Performance ◽  
Exchange Membrane

A general proton exchange membrane fuel cell model including two finite-thickness catalysts is developed in this study, allowing for an in-depth understanding of the effects of the two key electrochemical reactions taking place in the two catalysts. The model is used to predict the performances of fuel cells employing two different flow channel designs, providing insights for fuel cell design and performance optimization.

Sign in / Sign up

Export Citation Format

Share Document