scholarly journals Geometric Construction-Based Realization of Planar Elastic Behaviors With Parallel and Serial Manipulators

2017 ◽  
Vol 9 (5) ◽  
Author(s):  
Shuguang Huang ◽  
Joseph M. Schimmels
Keyword(s):  
Elastic Properties ◽  
Sufficient Conditions ◽  
Necessary And Sufficient Conditions ◽  
Geometric Construction ◽  
Elastic Component ◽  
Elastic Behavior ◽  
Serial Manipulators ◽  
New Construction ◽  
Necessary And Sufficient ◽  
Serial Mechanism

This paper addresses the passive realization of any selected planar elastic behavior with a parallel or a serial manipulator. Sets of necessary and sufficient conditions for a mechanism to passively realize an elastic behavior are presented. These conditions completely decouple the requirements on component elastic properties from the requirements on mechanism kinematics. The restrictions on the set of elastic behaviors that can be realized with a mechanism are described in terms of acceptable locations of realizable elastic behavior centers. Parallel–serial mechanism pairs that realize identical elastic behaviors (dual elastic mechanisms) are described. New construction-based synthesis procedures for planar elastic behaviors are developed. Using these procedures, one can select the geometry of each elastic component from a restricted space of kinematically allowable candidates. With each selection, the space is further restricted until the desired elastic behavior is achieved.

scholarly journals Geometric Approach to the Realization of Planar Elastic Behaviors With Mechanisms Having Four Elastic Components

2018 ◽  
Vol 10 (4) ◽  
Author(s):  
Shuguang Huang ◽  
Joseph M. Schimmels
Keyword(s):  
Sufficient Conditions ◽  
Geometric Approach ◽  
Necessary And Sufficient Conditions ◽  
Elastic Component ◽  
Elastic Behavior ◽  
Parallel Mechanisms ◽  
Compliant Joints ◽  
Necessary And Sufficient ◽  
Selection Of

This paper addresses the passive realization of any selected planar elastic behavior with redundant elastic manipulators. The class of manipulators considered are either serial mechanisms having four compliant joints or parallel mechanisms having four springs. Sets of necessary and sufficient conditions for mechanisms in this class to passively realize an elastic behavior are presented. The conditions are interpreted in terms of mechanism geometry. Similar conditions for nonredundant cases are highly restrictive. Redundancy yields a significantly larger space of realizable elastic behaviors. Construction-based synthesis procedures for planar elastic behaviors are also developed. In each, the selection of the mechanism geometry and the selection of joint/spring stiffnesses are completely decoupled. The procedures require that the geometry of each elastic component be selected from a restricted space of acceptable candidates.

Synthesis of Point Planar Elastic Behaviors Using Three-Joint Serial Mechanisms of Specified Construction

2016 ◽  
Vol 9 (1) ◽  
Author(s):  
Shuguang Huang ◽  
Joseph M. Schimmels
Keyword(s):  
Sufficient Conditions ◽  
Necessary And Sufficient Conditions ◽  
Elastic Behavior ◽  
Compliance Matrix ◽  
Revolute Joint ◽  
Redundant Mechanism ◽  
Compliance Matrices ◽  
Necessary And Sufficient ◽  
Serial Mechanism

This paper presents methods for the realization of 2 × 2 translational compliance matrices using serial mechanisms having three joints, each either revolute or prismatic and each with selectable compliance. The geometry of the mechanism and the location of the compliance frame relative to the mechanism base are each arbitrary but specified. Necessary and sufficient conditions for the realization of a given compliance with a given mechanism are obtained. We show that, for an appropriately constructed serial mechanism having at least one revolute joint, any single 2 × 2 compliance matrix can be realized by properly choosing the joint compliances and the mechanism configuration. For each type of three-joint combination, requirements on the redundant mechanism geometry are identified for the realization of every point planar elastic behavior at a given location, just by changing the mechanism configuration and the joint compliances.

scholarly journals A NEW CONSTRUCTION FOR REGULAR SEMIGROUPS WITH QUASI-IDEAL ORTHODOX TRANSVERSALS

2009 ◽  
Vol 86 (2) ◽  
pp. 177-187 ◽  
Author(s):  
XIANGJUN KONG ◽  
XIANZHONG ZHAO
Keyword(s):  
Regular Semigroup ◽  
Structure Theorem ◽  
Sufficient Conditions ◽  
Necessary And Sufficient Conditions ◽  
Green’S Relations ◽  
Regular Semigroups ◽  
New Construction ◽  
Necessary And Sufficient ◽  
Equivalent Conditions ◽  
Orthodox Semigroups

AbstractIn any regular semigroup with an orthodox transversal, we define two sets R and L using Green’s relations and give necessary and sufficient conditions for them to be subsemigroups. By using R and L, some equivalent conditions for an orthodox transversal to be a quasi-ideal are obtained. Finally, we give a structure theorem for regular semigroups with quasi-ideal orthodox transversals by two orthodox semigroups R and L.

The extinction time of a general birth and death process with catastrophes

1986 ◽  
Vol 23 (04) ◽  
pp. 851-858 ◽  
Author(s):  
P. J. Brockwell
Keyword(s):  
Laplace Transform ◽  
Size Distribution ◽  
Sufficient Conditions ◽  
Necessary And Sufficient Conditions ◽  
Death Process ◽  
Extinction Time ◽  
Birth And Death Process ◽  
Different Types ◽  
The Laplace Transform ◽  
Necessary And Sufficient

The Laplace transform of the extinction time is determined for a general birth and death process with arbitrary catastrophe rate and catastrophe size distribution. It is assumed only that the birth rates satisfyλ0= 0,λj> 0 for eachj> 0, and. Necessary and sufficient conditions for certain extinction of the population are derived. The results are applied to the linear birth and death process (λj=jλ, µj=jμ) with catastrophes of several different types.

Nonlinear boundary-value problems for degenerate differential-algebraic systems

2020 ◽  
Vol 17 (3) ◽  
pp. 313-324
Author(s):  
Sergii Chuiko ◽  
Ol'ga Nesmelova
Keyword(s):  
Boundary Value Problem ◽  
Boundary Value Problems ◽  
Algebraic System ◽  
Boundary Value ◽  
Sufficient Conditions ◽  
Necessary And Sufficient Conditions ◽  
Weakly Nonlinear ◽  
Differential Algebraic System ◽  
Linear Differential ◽  
Necessary And Sufficient

The study of the differential-algebraic boundary value problems, traditional for the Kiev school of nonlinear oscillations, founded by academicians M.M. Krylov, M.M. Bogolyubov, Yu.A. Mitropolsky and A.M. Samoilenko. It was founded in the 19th century in the works of G. Kirchhoff and K. Weierstrass and developed in the 20th century by M.M. Luzin, F.R. Gantmacher, A.M. Tikhonov, A. Rutkas, Yu.D. Shlapac, S.L. Campbell, L.R. Petzold, Yu.E. Boyarintsev, V.F. Chistyakov, A.M. Samoilenko, O.A. Boichuk, V.P. Yacovets, C.W. Gear and others. In the works of S.L. Campbell, L.R. Petzold, Yu.E. Boyarintsev, V.F. Chistyakov, A.M. Samoilenko and V.P. Yakovets were obtained sufficient conditions for the reducibility of the linear differential-algebraic system to the central canonical form and the structure of the general solution of the degenerate linear system was obtained. Assuming that the conditions for the reducibility of the linear differential-algebraic system to the central canonical form were satisfied, O.A.~Boichuk obtained the necessary and sufficient conditions for the solvability of the linear Noetherian differential-algebraic boundary value problem and constructed a generalized Green operator of this problem. Based on this, later O.A. Boichuk and O.O. Pokutnyi obtained the necessary and sufficient conditions for the solvability of the weakly nonlinear differential algebraic boundary value problem, the linear part of which is a Noetherian differential algebraic boundary value problem. Thus, out of the scope of the research, the cases of dependence of the desired solution on an arbitrary continuous function were left, which are typical for the linear differential-algebraic system. Our article is devoted to the study of just such a case. The article uses the original necessary and sufficient conditions for the solvability of the linear Noetherian differential-algebraic boundary value problem and the construction of the generalized Green operator of this problem, constructed by S.M. Chuiko. Based on this, necessary and sufficient conditions for the solvability of the weakly nonlinear differential-algebraic boundary value problem were obtained. A typical feature of the obtained necessary and sufficient conditions for the solvability of the linear and weakly nonlinear differential-algebraic boundary-value problem is its dependence on the means of fixing of the arbitrary continuous function. An improved classification and a convergent iterative scheme for finding approximations to the solutions of weakly nonlinear differential algebraic boundary value problems was constructed in the article.

On the domain of Riesz mean in the space Ls

Filomat ◽  
2017 ◽  
Vol 31 (4) ◽  
pp. 925-940 ◽  
Author(s):  
Medine Yeşilkayagil ◽  
Feyzi Başar
Keyword(s):  
Banach Space ◽  
Sequence Space ◽  
Double Sequence ◽  
Sufficient Conditions ◽  
Necessary And Sufficient Conditions ◽  
Double Sequences ◽  
Riesz Mean ◽  
Double Sequence Space ◽  
Necessary And Sufficient ◽  
Barrelled Space

Let 0 < s < ?. In this study, we introduce the double sequence space Rqt(Ls) as the domain of four dimensional Riesz mean Rqt in the space Ls of absolutely s-summable double sequences. Furthermore, we show that Rqt(Ls) is a Banach space and a barrelled space for 1 ? s < 1 and is not a barrelled space for 0 < s < 1. We determine the ?- and ?(?)-duals of the space Ls for 0 < s ? 1 and ?(bp)-dual of the space Rqt(Ls) for 1 < s < 1, where ? ? {p, bp, r}. Finally, we characterize the classes (Ls:Mu), (Ls:Cbp), (Rqt(Ls) : Mu) and (Rqt(Ls):Cbp) of four dimensional matrices in the cases both 0 < s < 1 and 1 ? s < 1 together with corollaries some of them give the necessary and sufficient conditions on a four dimensional matrix in order to transform a Riesz double sequence space into another Riesz double sequence space.

Sign in / Sign up

Export Citation Format

Share Document