scholarly journals Propagation of a Plane Strain Hydraulic Fracture With a Fluid Lag in Permeable Rock

2018 ◽  
Vol 85 (9) ◽  
Author(s):  
B. Chen ◽  
Andrew R. Barron ◽  
D. R. J. Owen ◽  
Chen-Feng Li

Based on the KGD scheme, this paper investigates, with both analytical and numerical approaches, the propagation of a hydraulic fracture with a fluid lag in permeable rock. On the analytical aspect, the general form of normalized governing equations is first formulated to take into account both fluid lag and leak-off during the process of hydraulic fracturing. Then a new self-similar solution corresponding to the limiting case of zero dimensionless confining stress (T=0) and infinite dimensionless leak-off coefficient (L=∞) is obtained. A dimensionless parameter R is proposed to indicate the propagation regimes of hydraulic fracture in more general cases, where R is defined as the ratio of the two time-scales related to the dimensionless confining stress T and the dimensionless leak-off coefficient L. In addition, a robust finite element-based KGD model has been developed to simulate the transient process from L=0 to L=∞ under T=0, and the numerical solutions converge and agree well with the self-similar solution at T=0 and L=∞. More general processes from T=0 and L=0 to T=∞ and L=∞ for three different values of R are also simulated, which proves the effectiveness of the proposed dimensionless parameter R for indicating fracture regimes.


2017 ◽  
Vol 9 (6) ◽  
pp. 657-668
Author(s):  
A. V. Karakin ◽  
M. M. Ramazanov ◽  
V. E. Borisov ◽  
I. S. Men’shov ◽  
E. B. Savenkov




2014 ◽  
Vol 747 ◽  
pp. 218-246 ◽  
Author(s):  
Zhong Zheng ◽  
Ivan C. Christov ◽  
Howard A. Stone

AbstractWe report experimental, theoretical and numerical results on the effects of horizontal heterogeneities on the propagation of viscous gravity currents. We use two geometries to highlight these effects: (a) a horizontal channel (or crack) whose gap thickness varies as a power-law function of the streamwise coordinate; (b) a heterogeneous porous medium whose permeability and porosity have power-law variations. We demonstrate that two types of self-similar behaviours emerge as a result of horizontal heterogeneity: (a) a first-kind self-similar solution is found using dimensional analysis (scaling) for viscous gravity currents that propagate away from the origin (a point of zero permeability); (b) a second-kind self-similar solution is found using a phase-plane analysis for viscous gravity currents that propagate toward the origin. These theoretical predictions, obtained using the ideas of self-similar intermediate asymptotics, are compared with experimental results and numerical solutions of the governing partial differential equation developed under the lubrication approximation. All three results are found to be in good agreement.





2020 ◽  
Author(s):  
Grigory Paderin

<p>Nowadays hydraulic fracturing is an essential part of the development of low-permeability oil and gas fields. Moreover, the well productivity dynamics is radically depends on the effectiveness of fracturing treatment. One of the main hydraulic fracturing design problem is create a long fracture without crack height growth into the intervals saturated with non-target fluid (e.g. water). The obtaining self-similar solution to this problem in the framework of the Pserudo3D [1-3] model is considered in the presented study.</p><p>The presented crack propagation analysis shows that in the case of constant bottom hole pressure the automodel solution of one variable could be derived. A study on the dependence of the solution on pressure, time, hydraulic fluid properties and leak off is also conducted.</p><p>REFERENCES<br>[1] J.I. Adachi, E. Detournay, and A. P. Peirce // Analysis of the classical pseudo-3D model for hydraulic fracture with equilibrium height growth across stress barriers. International Journal of Rock Mechanics and Mining Sciences. 2010. 47 (4): 625–639. <br>[2] X. Weng, O. Kresse, C. Cohen, R. Wu, and H. Gu // Modeling of hydraulic-fracture-network propagation in a naturally fractured formation. SPE Production & Operations  2011. 26 (4): 368–380. doi:10.2118/140253-PA.<br>[3] G.V. Paderin // Proxy Pseudo3D model: the optimum of speed and accuracy in hydraulic fracturing simulation. IOP Conference Series: Earth and Environmental Science. 2018.</p>



Sign in / Sign up

Export Citation Format

Share Document