Dynamics of Large-Scale Structures for Jets in a Crossflow

Author(s):  
Frank Muldoon ◽  
Sumanta Acharya

Results of a three dimensional unsteady computational study of a row of jets injected normal to a cross-flow are presented with the aim of understanding the dynamics of the large scale structures in the region near the jet. The jet to cross-flow velocity ratio is .5. A modified version of the computer program (INS3D) which utilizes the method of artificial compressibility is used for the computations. Results obtained clearly indicate that the near field large scale structures are extremely dynamical in nature, and undergo breakup and reconnection processes. The dynamical near field structures identified include the counter rotating vortex pair (CVP), the horseshoe vortex, wake vortex, wall vortex and the shear layer vortex. The dynamical features of these vortices are presented in this paper. The CVP is observed to be a convoluted structure interacting with the wall and horseshoe vortices. The shear layer vortices are stripped by the crossflow, and undergo pairing and stretching events in the leeward side of the jet. The wall vortex is reoriented into the upright wake system. Comparison of the predictions with mean velocity measurements is made. Reasonable agreement is observed.

1999 ◽  
Vol 121 (3) ◽  
pp. 577-587 ◽  
Author(s):  
F. Muldoon ◽  
S. Acharya

Results of a three-dimensional unsteady computational study of a row of jets injected normal to a crossflow are presented with the aim of understanding the dynamics of the large-scale structures in the region near the jet. The jet to crossflow velocity ratio is 0.5. A modified version of the computer program (INS3D), which utilizes the method of artificial compressibility, is used for the computations. Results obtained clearly indicate that the near-field large-scale structures are extremely dynamic in nature, and undergo breakup and reconnection processes. The dynamic near-field structures identified include the counterrotating vortex pair (CVP), the horseshoe vortex, wake vortex, wall vortex, and shear layer vortex. The dynamic features of these vortices are presented in this paper. The CVP is observed to be a convoluted structure interacting with the wall and horseshoe vortices. The shear layer vortices are stripped by the crossflow, and undergo pairing and stretching events in the leeward side of the jet. The wall vortex is reoriented into the upright wake system. Comparison of the predictions with mean velocity measurements is made. Reasonable agreement is observed.


Author(s):  
Frank Muldoon ◽  
Sumanta Acharya

Results of a three dimensional unsteady computational study of a row of jets injected normal to a cross-flow are presented with the aim of understanding the dynamics of the large scale structures in the region near the jet. The jet hole is square in cross-section, and the jet to cross-flow velocity ratio is 0.5. The calculations are based on higher-order finite differences, and are performed on extremely refined spatial and temporal meshes so that all the important energy-carrying scales are resolved. Results obtained indicate that the near field large scale structures include the shear layer vortices, the counter rotating vortex pair (CVP), the horseshoe vortex system, and wake and wall vortices. The dynamics of these structures appear to be significantly influenced by a time-periodic interaction between the jet hole boundary layer and the approaching crossflow. This periodic behavior involves the approaching crossflow periodically ingressing into the jet hole region and pushing the injected jet back toward the trailing edge at a Strouhal number of 0.44 based on the jet velocity and diameter. A new mechanism for the formation of shear layer vortices is identified and consists of alternate shedding of positive vorticity from the hole leading edge boundary layer and negative vorticity from the leading horseshoe vortex. Comparison of the predicted turbulent statistics with experimental measurements are made and reasonable agreement is observed.


2018 ◽  
Vol 839 ◽  
pp. 313-347 ◽  
Author(s):  
Michael Crawley ◽  
Lior Gefen ◽  
Ching-Wen Kuo ◽  
Mo Samimy ◽  
Roberto Camussi

This work aims to study the dynamics of and noise generated by large-scale structures in a Mach 0.9 turbulent jet of Reynolds number $6.2\times 10^{5}$ using plasma-based excitation of shear layer instabilities. The excitation frequency is varied to produce individual or periodic coherent ring vortices in the shear layer. First, two-point cross-correlations are used between the acoustic near field and far field in order to identify the dominant noise source region. The large-scale structure interactions are then investigated by stochastically estimating time-resolved velocity fields using time-resolved near-field pressure traces and non-time-resolved planar velocity snapshots (obtained by particle image velocimetry) by means of an artificial neural network. The estimated time-resolved velocity fields show multiple mergings of large-scale structures in the shear layer, and indicate that disintegration of coherent ring vortices is the dominant aeroacoustic source mechanism for the jet studied here. However, the merging of vortices in the initial shear layer is also identified as a non-trivial noise source mechanism.


2001 ◽  
Vol 13 (3) ◽  
pp. 770-775 ◽  
Author(s):  
T. T. Lim ◽  
T. H. New ◽  
S. C. Luo

2020 ◽  
Vol 142 (2) ◽  
Author(s):  
Joshua T. M. Horwood ◽  
Fabian P. Hualca ◽  
Mike Wilson ◽  
James A. Scobie ◽  
Carl M. Sangan ◽  
...  

Abstract The ingress of hot annulus gas into stator–rotor cavities is an important topic to engine designers. Rim-seals reduce the pressurized purge required to protect highly stressed components. This paper describes an experimental and computational study of flow through a turbine chute seal. The computations—which include a 360 deg domain—were undertaken using dlrtrace's time-marching solver. The experiments used a low Reynolds number turbine rig operating with an engine-representative flow structure. The simulations provide an excellent prediction of cavity pressure and swirl, and good overall agreement of sealing effectiveness when compared to experiment. Computation of flow within the chute seal showed strong shear gradients which influence the pressure distribution and secondary-flow field near the blade leading edge. High levels of shear across the rim-seal promote the formation of large-scale structures at the wheel-space periphery; the number and speed of which were measured experimentally and captured, qualitatively and quantitatively, by computations. A comparison of computational domains ranging from 30 deg to 360 deg indicates that steady features of the flow are largely unaffected by sector size. However, differences in large-scale flow structures were pronounced with a 60 deg sector and suggest that modeling an even number of blades in small sector simulations should be avoided.


2016 ◽  
Vol 139 (1) ◽  
Author(s):  
K. M. Nair ◽  
S. Sarkar

The primary objective is to perform a large eddy simulation (LES) using shear improved Smagorinsky model (SISM) to resolve the large-scale structures, which are primarily responsible for shear layer oscillations and acoustic loads in a cavity. The unsteady, three-dimensional (3D), compressible Navier–Stokes (N–S) equations have been solved following AUSM+-up algorithm in the finite-volume formulation for subsonic and supersonic flows, where the cavity length-to-depth ratio was 3.5 and the Reynolds number based on cavity depth was 42,000. The present LES resolves the formation of shear layer, its rollup resulting in large-scale structures apart from shock–shear layer interactions, and evolution of acoustic waves. It further indicates that hydrodynamic instability, rather than the acoustic waves, is the cause of self-sustained oscillation for subsonic flow, whereas the compressive and acoustic waves dictate the cavity oscillation, and thus the sound pressure level for supersonic flow. The present LES agrees well with the experimental data and is found to be accurate enough in resolving the shear layer growth, compressive wave structures, and radiated acoustic field.


1989 ◽  
Vol 111 (1) ◽  
pp. 148-155 ◽  
Author(s):  
E. Gutmark ◽  
T. P. Parr ◽  
D. M. Parr ◽  
K. C. Schadow

The interaction between the fluid dynamics and the combustion process in an annular diffusion flame was studied experimentally using the Planar Laser Induced Fluorescence (PLIF) technique. The local temperature and OH radical fluorescence signals were mapped in the entire flame cross section. The flame was forced at different instability frequencies, thus enabling the study of the evolution and interaction of large-scale structures in the flame shear layer. The present study of the effect of fluid dynamics on combustion is part of a more comprehensive program aimed at understanding and controlling the effect of heat release, density variations, and reaction parameters on the shear layer evolution.


Author(s):  
Joshua T. M. Horwood ◽  
Fabian P. Hualca ◽  
Mike Wilson ◽  
James A. Scobie ◽  
Carl M. Sangan ◽  
...  

Abstract The ingress of hot annulus gas into stator-rotor cavities is an important topic to engine designers. Rim-seals reduce the pressurised purge required to protect highly-stressed components. This paper describes an experimental and computational study of flow through a turbine chute seal. The computations — which include a 360° domain — were undertaken using DLR TRACE’s time-marching solver. The experiments used a low Reynolds number turbine rig operating with an engine-representative flow structure. The simulations provide an excellent prediction of cavity pressure and swirl, and good overall agreement of sealing effectiveness when compared to experiment. Computation of flow within the chute seal showed strong shear gradients which influence the pressure distribution and secondary-flow field near the blade leading edge. High levels of shear across the rim-seal promote the formation of large-scale structures at the wheel-space periphery; the number and speed of which were measured experimentally and captured, qualitatively and quantitatively, by computations. A comparison of computational domains ranging from 30° to 360° indicate that steady features of the flow are largely unaffected by sector size. However, differences in large-scale flow structures were pronounced with a 60° sector and suggest that modelling an even number of blades in small sector simulations should be avoided.


For over a quarter of a century it has been recognized that turbulent shear flows are dominated by large-scale structures. Yet the majority of models for turbulent mixing fail to include the properties of the structures either explicitly or implicitly. The results obtained using these models may appear to be satisfactory, when compared with experimental observations, but in general these models require the inclusion of empirical constants, which render the predictions only as good as the empirical database used in the determination of such constants. Existing models of turbulence also fail to provide, apart from its stochastic properties, a description of the time-dependent properties of a turbulent shear flow and its development. In this paper we introduce a model for the large-scale structures in a turbulent shear layer. Although, with certain reservations, the model is applicable to most turbulent shear flows, we restrict ourselves here to the consideration of turbulent mixing in a two-stream compressible shear layer. Two models are developed for this case that describe the influence of the large-scale motions on the turbulent mixing process. The first model simulates the average behaviour by calculating the development of the part of the turbulence spectrum related to the large-scale structures in the flow. The second model simulates the passage of a single train of large-scale structures, thereby modelling a significant part of the time-dependent features of the turbulent flow. In both these treatments the large-scale structures are described by a superposition of instability waves. The local properties of these waves are determined from linear, inviscid, stability analysis. The streamwise development of the mean flow, which includes the amplitude distribution of these instability waves, is determined from an energy integral analysis. The models contain no empirical constants. Predictions are made for the effects of freestream velocity and density ratio as well as freestream Mach number on the growth of the mixing layer. The predictions agree very well with experimental observations. Calculations are also made for the time-dependent motion of the turbulent shear layer in the form of streaklines that agree qualitatively with observation. For some other turbulent shear flows the dominant structure of the large eddies can be obtained similarly using linear stability analysis and a partial justification for this procedure is given in the Appendix. In wall-bounded flows a preliminary analysis indicates that a linear, viscous, stability analysis must be extended to second order to derive the most unstable waves and their subsequent development. The extension of the present model to such cases and the inclusion of the effects of chemical reactions in the models are also discussed.


Sign in / Sign up

Export Citation Format

Share Document