Null Space Method of Differential Equation Type for Motion Analysis of Multibody Systems

2017 ◽  
Author(s):  
Keisuke Kamiya ◽  
Yusaku Yamashita
Keyword(s):  
Lagrange Multipliers ◽  
Multibody Systems ◽  
Null Space ◽  
Differential Algebraic Equations ◽  
Algebraic Equations ◽  
Governing Equations ◽  
Accurate Analysis ◽  
Dependent Variables ◽  
Space Matrix ◽  
Space Method

The governing equations of multibody systems are, in general, formulated in the form of differential algebraic equations (DAEs) involving the Lagrange multipliers. For efficient and accurate analysis, it is desirable to eliminate the Lagrange multipliers and dependent variables. Methods called null space method and Maggi’s method eliminate the Lagrange multipliers by using the null space matrix for the constraint Jacobian. In previous reports, one of the authors presented methods which use the null space matrix. In the procedure to obtain the null space matrix, the inverse of a matrix whose regularity may not be always guaranteed. In this report, a new method is proposed in which the null space matrix is obtained by solving differential equations that can be always defined by using the QR decomposition, even if the constraints are redundant. Examples of numerical analysis are shown to validate the proposed method.

Continuous Null Space Method for Constrained Mechanical Systems

2011 ◽  
Author(s):  
Keisuke Kamiya ◽  
Makoto Sawada ◽  
Yuji Furusawa
Keyword(s):  
Lagrange Multipliers ◽  
Null Space ◽  
Differential Algebraic Equations ◽  
Algebraic Equations ◽  
Governing Equations ◽  
Accurate Analysis ◽  
Constrained Mechanical Systems ◽  
Dependent Variables ◽  
Space Matrix ◽  
Space Method

The governing equations for multibody systems are, in general, formulated in the form of differential algebraic equations (DAEs) involving the Lagrange multipliers. It is desirable for efficient and accurate analysis to eliminate the Lagrange multipliers and dependent variables. As a method to solve the DAEs by eliminating the Lagrange multipliers, there is a method called the null space method. In this report, first, it is shown that using the null space matrix one can eliminate the Lagrange multipliers and reduce the number of velocities to that of the independent ones. Then, a new method to obtain the continuous null space matrix is presented. Finally, the presented method is applied to four-bar linkages.

Time-Differentiable Null Space Method for Constrained Mechanical Systems (Application to a Rheonomic System)

2013 ◽  
Author(s):  
Keisuke Kamiya
Keyword(s):  
Lagrange Multipliers ◽  
Null Space ◽  
Constraint Equation ◽  
Coefficient Matrix ◽  
Differential Algebraic Equations ◽  
Algebraic Equations ◽  
Accurate Analysis ◽  
Constrained Mechanical Systems ◽  
Space Matrix ◽  
Space Method

The governing equations of multibody systems are, in general, formulated in the form of differential algebraic equations (DAEs) involving the Lagrange multipliers. For efficient and accurate analysis, it is desirable to eliminate the Lagrange multipliers and dependent variables. Methods called null space method and Maggi’s method eliminate the Lagrange multipliers by using the null space matrix for the coefficient matrix which appears in the constraint equation in velocity level. In a previous report, the author presented a method to obtain a time differentiable null space matrix for scleronomic systems, whose constraint does not depend on time explicitly. In this report, the method is generalized to rheonomic systems, whose constraint depends on time explicitly. Finally, the presented method is applied to four-bar linkages.

Analysis of Constraint Forces in Multibody Systems Based on the Differential Null Space Matrix Method

2019 ◽  
Author(s):  
Keisuke Kamiya
Keyword(s):  
Lagrange Multipliers ◽  
Multibody Systems ◽  
Null Space ◽  
Governing Equations ◽  
Constraint Forces ◽  
Numerical Examples ◽  
Space Matrix ◽  
Rigid Multibody Systems ◽  
Rigid Multibody

Abstract This paper treats a problem to determine constraint forces in rigid mutibody systems. One of the most often applied algorithms for determination of constraint forces is based on the use of recursive Newton-Euler formalism. Another algorithm often applied for determination of constraint forces is based on the use of Lagrange multipliers. This paper presents a new method to determine constraint forces in rigid multibody systems. First relative displacements which violate the constraints, called anti-constraint relative displacements, are introduced, and governing equations which involve the constraint forces explicitly are derived. In the derived equations, the constraint forces appear independently from the Lagrange multipliers. Then, a method is proposed to determine the constraint forces by eliminating the Lagrange multipliers based on the methods proposed in previous papers by the author. The method is extended to have ability to treat systems with redundant constraints. Finally, validity of the proposed method is confirmed via numerical examples.

Improved Differential Nullspace Matrix Method for the Dynamic Analysis of Multibody Systems

2018 ◽  
Author(s):  
Keisuke Kamiya
Keyword(s):  
Lagrange Multipliers ◽  
Multibody Systems ◽  
Differential Algebraic Equations ◽  
Computational Time ◽  
Algebraic Equations ◽  
Accurate Analysis ◽  
Dynamics Of Multibody Systems ◽  
General Dynamics ◽  
Novel Method ◽  
Rigid Multibody Systems

This paper presents a novel method for motion analysis of rigid multibody systems. In general, dynamics of multibody systems is described by differential algebraic equations with Lagrange multipliers. For efficient and accurate analysis, it is desirable to eliminate the Lagrange multipliers and dependent variables. Methods called nullspace method and Maggi’s method eliminate the Lagrange multipliers by using the nullspace matrix for the constraint Jacobian. In a previous report, the author presented a method in which the nullspace matrix is obtained by solving a differential equation together with the equation of motion of the system. In that method QR decomposition is used. In this report, reduction in computational time with the LU decomposition is attempted. In addition, treatment of singular configurations for accurate analysis is presented. Validity of the presented method is confirmed via numerical examples.

An Accurate Spatial Discretization and Substructural Method With Application to Moving Elevator Cable-Car Systems: Part I—Methodology

2011 ◽  
Author(s):  
H. Ren ◽  
W. D. Zhu
Keyword(s):  
Differential Algebraic Equations ◽  
Distributed Parameter ◽  
Algebraic Equations ◽  
Spatial Discretization ◽  
Matching Conditions ◽  
Generalized Coordinates ◽  
Axial Forces ◽  
Linear Algebraic Equations ◽  
Dependent Variables ◽  
Elevator Cable

A spatial discretization and substructure method is developed to calculate the dynamic responses of one-dimensional systems, which consist of length-variant distributed-parameter components such as strings, rods, and beams, and lumped-parameter components such as point masses and rigid bodies. The dependent variable, such as the displacement, of a distributed-parameter component is decomposed into boundary-induced terms and internal terms. The boundary-induced terms are interpolated from the boundary motions, and the internal terms are approximated by an expansion of trial functions that satisfy the corresponding homogeneous boundary conditions. All the matching conditions at the interfaces of the components are satisfied, and the expansions of the dependent variables of the distributed-parameter components absolutely and uniformly converge. The spatial derivatives of the dependent variables, which are related to the internal forces/moments, such as the axial forces, bending moments, and shear forces, can be accurately calculated. Assembling the component equations and the geometric matching conditions that arise from the continuity relations leads to a system of differential algebraic equations (DAEs). When some matching conditions are linear algebraic equations, some generalized coordinates can be represented by others so that the number of the generalized coordinates can be reduced. The methodology is applied to moving elevator cable-car systems in Part II of this work.

Trajectory Tracking of Underactuated Multibody Systems

2011 ◽  
Author(s):  
Stefan Reichl ◽  
Wolfgang Steiner
Keyword(s):  
Trajectory Tracking ◽  
Multibody Systems ◽  
Degrees Of Freedom ◽  
Inverse Dynamics ◽  
Feedforward Control ◽  
Equations Of Motion ◽  
Three Dimensional ◽  
Differential Algebraic Equations ◽  
State Variables ◽  
Algebraic Equations

This work presents three different approaches in inverse dynamics for the solution of trajectory tracking problems in underactuated multibody systems. Such systems are characterized by less control inputs than degrees of freedom. The first approach uses an extension of the equations of motion by geometric and control constraints. This results in index-five differential-algebraic equations. A projection method is used to reduce the systems index and the resulting equations are solved numerically. The second method is a flatness-based feedforward control design. Input and state variables can be parameterized by the flat outputs and their time derivatives up to a certain order. The third approach uses an optimal control algorithm which is based on the minimization of a cost functional including system outputs and desired trajectory. It has to be distinguished between direct and indirect methods. These specific methods are applied to an underactuated planar crane and a three-dimensional rotary crane.

Control Constraint Realization for Multibody Systems

2009 ◽  
Author(s):  
Alessandro Fumagalli ◽  
Pierangelo Masarati ◽  
Marco Morandini ◽  
Paolo Mantegazza
Keyword(s):  
Linear Systems ◽  
Multibody Systems ◽  
Matrix Pencil ◽  
Differential Algebraic Equations ◽  
Algebraic Equations ◽  
Control Constraint ◽  
Practical Observation ◽  
Alternative Condition ◽  
Deformable Bodies

This paper discusses the problem of control constraint realization applied to generic under-actuated multibody systems. The conditions for the realization are presented. Focus is placed on the tangent realization of the control constraint. An alternative condition is formulated, based on the practical observation that Differential-Algebraic Equations (DAE) need to be integrated using implicit algorithms, thus naturally leading to the solution of the problem in form of matrix pencil. The analogy with the representation of linear systems in Laplace’s domain is also discussed. The formulation is applied to the solution of simple, yet illustrative problems, related to rigid and deformable bodies. Some implications of considering deformable continua are addressed.

Sign in / Sign up

Export Citation Format

Share Document