A Control Oriented Charge Mixing and HCCI Combustion Model for Internal Combustion Engines

Author(s):  
Shupeng Zhang ◽  
Guoming G. Zhu ◽  
Yongsoon Yoon ◽  
Zongxuan Sun
2011 ◽  
Vol 2011 ◽  
pp. 1-8 ◽  
Author(s):  
Gregory T. Chin ◽  
J.-Y. Chen ◽  
Vi H. Rapp ◽  
R. W. Dibble

A 28-species reduced chemistry mechanism for Dimethyl Ether (DME) combustion is developed on the basis of a recent detailed mechanism by Zhao et al. (2008). The construction of reduced chemistry was carried out with automatic algorithms incorporating newly developed strategies. The performance of the reduced mechanism is assessed over a wide range of combustion conditions anticipated to occur in future advanced piston internal combustion engines, such as HCCI, SAHCCI, and PCCI. Overall, the reduced chemistry gives results in good agreement with those from the detailed mechanism for all the combustion modes tested. While the detailed mechanism by Zhao et al. (2008) shows reasonable agreement with the shock tube autoignition delay data, the detailed mechanism requires further improvement in order to better predict HCCI combustion under engine conditions.


2009 ◽  
Vol 13 (3) ◽  
pp. 35-46 ◽  
Author(s):  
Karima Boussouara ◽  
Mahfoud Kadja

Modelling internal combustion engines can be made following different approaches, depending on the type of problem to be simulated. A diesel combustion model has been developed and implemented in a full cycle simulation of a combustion, model accounts for transient fuel spray evolution, fuel-air mixing, ignition, combustion, and soot pollutant formation. The models of turbulent combustion of diffusion flame, apply to diffusion flames, which one meets in industry, typically in the diesel engines particulate emission represents one of the most deleterious pollutants generated during diesel combustion. Stringent standards on particulate emission along with specific emphasis on size of emitted particulates have resulted in increased interest in fundamental understanding of the mechanisms of soot particulate formation and oxidation in internal combustion engines. A phenomenological numerical model which can predict the particle size distribution of the soot emitted will be very useful in explaining the above observed results and will also be of use to develop better particulate control techniques. A diesel engine chosen for simulation is a version of the Caterpillar 3406. We are interested in employing a standard finite-volume computational fluid dynamics code, KIVA3V-RELEASE2.


Author(s):  
Chuanhao Zhao ◽  
Yang Luo

This paper is a brief review of the homogeneous charge compression ignition (HCCI) model for hydrogen-fueled internal combustion engines based on an analysis of the advantages and disadvantages of hydrogen internal combustion engines and HCCI combustion. It found that HCCI can be realized in a hydrogen-fueled internal combustion engine, meanwhile the HCCI can effectively reduce the emission of hydrogen internal combustion engine.


2018 ◽  
Author(s):  
Branislav Basara ◽  
Zoran N. Pavlovic ◽  
Sinisa Krajnovic

Sign in / Sign up

Export Citation Format

Share Document