Effects of Weak Free Stream Nonuniformity on Boundary Layer Transition (Keynote Paper)

2003 ◽  
Author(s):  
Jonathan H. Watmuff
Keyword(s):  
Boundary Layer ◽  
Free Stream ◽  
Leading Edge ◽  
Boundary Layer Transition ◽  
Mean Flow ◽  
Layer Transition ◽  
Free Stream Turbulence ◽  
Tollmien Schlichting ◽  
Distorted Waves ◽  
Thickness Variations

Experiments are described in which well-defined FSN (Free Stream Nonuniformity) distributions are introduced by placing fine wires upstream of the leading edge of a flat plate. Large amplitude spanwise thickness variations are present in the downstream boundary layer resulting from the interaction of the laminar wakes with the leading edge. Regions of elevated background unsteadiness appear on either side of the peak layer thickness, which share many of the characteristics of Klebanoff modes, observed at elevated Free Stream Turbulence (FST) levels. However, for the low background disturbance level of the free stream, the layer remains laminar to the end of the test section (Rx ≈ l.4×106) and there is no evidence of bursting or other phenomena associated with breakdown to turbulence. A vibrating ribbon apparatus is used to demonstrate that the deformation of the mean flow is responsible for substantial phase and amplitude distortion of Tollmien-Schlichting (TS) waves. Pseudo-flow visualization of hot-wire data shows that the breakdown of the distorted waves is more complex and occurs at a lower Reynolds number than the breakdown of the K-type secondary instability observed when the FSN is not present.

Effects of Weak Free Stream Nonuniformity on Boundary Layer Transition

2005 ◽  
Vol 128 (2) ◽  
pp. 247-257 ◽  
Author(s):  
Jonathan H. Watmuff
Keyword(s):  
Boundary Layer ◽  
Layer Thickness ◽  
Free Stream ◽  
Leading Edge ◽  
Boundary Layer Transition ◽  
Bypass Transition ◽  
Mean Flow ◽  
Low Speed ◽  
Free Stream Turbulence ◽  
Thickness Variations

Experiments are described in which well-defined weak Free Stream Nonuniformity (FSN) is introduced by placing fine wires upstream of the leading edge of a flat plate. Large amplitude spanwise thickness variations form in the boundary layer as a result of the interaction between the steady laminar wakes from the wires and the leading edge. The centerline of a region of elevated layer thickness is aligned with the centerline of the wake in the freestream and the response is shown to be remarkably sensitive to the spanwise length-scale of the wakes. The region of elevated thickness is equivalent to a long narrow low speed streak in the layer. Elevated Free Stream Turbulence (FST) levels are known to produce randomly forming arrays of long narrow low speed streaks in laminar boundary layers. Therefore the characteristics of the streaks resulting from the FSN are studied in detail in an effort to gain some insight into bypass transition that occurs at elevated FST levels. The shape factors of the profiles in the vicinity of the streak appear to be unaltered from the Blasius value, even though the magnitude of the local thickness variations are as large as 60% of that of the undisturbed layer. Regions of elevated background unsteadiness appear on either side of the streak and it is shown that they are most likely the result of small amplitude spanwise modulation of the layer thickness. The background unsteadiness shares many of the characteristics of Klebanoff modes observed at elevated FST levels. However, the layer remains laminar to the end of the test section (Rx≈1.4×106) and there is no evidence of bursting or other phenomena associated with breakdown to turbulence. A vibrating ribbon apparatus is used to examine interactions between the streak and Tollmien-Schlichting (TS) waves. The deformation of the mean flow introduced by the streak is responsible for substantial phase and amplitude distortion of the waves and the breakdown of the distorted waves is more complex and it occurs at a lower Reynolds number than the breakdown of the K-type secondary instability that is observed when the FSN is not present.

Boundary Layer Transition Under High Free-Stream Turbulence and Strong Acceleration Conditions: Part 1—Mean Flow Results

1997 ◽  
Vol 119 (3) ◽  
pp. 420-426 ◽  
Author(s):  
R. J. Volino ◽  
T. W. Simon
Keyword(s):  
Boundary Layer ◽  
Skin Friction ◽  
Free Stream ◽  
Boundary Layer Transition ◽  
Temperature Profiles ◽  
Mean Flow ◽  
Transfer Coefficients ◽  
Mean Velocity ◽  
Layer Transition ◽  
Free Stream Turbulence

Measurements from heated boundary layers along a concave-curved test wall subject to high (initially 8 percent) free-stream turbulence intensity and strong (K = (ν/U∞2) dU∞/dx) as high as 9 × 10−6) acceleration are presented and discussed. Conditions for the experiments were chosen to roughly simulate those present on the downstream half of the pressure side of a gas turbine airfoil. Mean velocity and temperature profiles as well as skin friction and heat transfer coefficients are presented. The transition zone is of extended length in spite of the high free-stream turbulence level. Transitional values of skin friction coefficients and Stanton numbers drop below flat-plate, low-free-stream-turbulence, turbulent flow correlations, but remain well above laminar flow values. The mean velocity and temperature profiles exhibit clear changes in shape as the flow passes through transition. To the authors’ knowledge, this is the first detailed documentation of a high-free-stream-turbulence boundary layer flow in such a strong acceleration field.

Boundary Layer Transition at High Levels of Free Stream Turbulence

1998 ◽  
Author(s):  
Masaharu Matsubara ◽  
P. Henrik Alfredsson ◽  
K. Johan A. Westin
Keyword(s):  
Boundary Layer ◽  
Boundary Layers ◽  
Free Stream ◽  
Turbine Blades ◽  
Boundary Layer Transition ◽  
Transition To Turbulence ◽  
Flow Visualisation ◽  
Mean Flow ◽  
Layer Transition ◽  
Free Stream Turbulence

Transition to turbulence in laminar boundary layers subjected to high levels of free stream turbulence (FST) can still not be reliably predicted, despite its technical importance, e.g. in the case of boundary layers developing on gas turbine blades. In a series of experiments in the MTL-wind tunnel at KTH the influence of grid-generated FST on boundary layer transition has been studied, with FST-levels up to 6%. It was shown from both flow visualisation and hot-wire measurements that the boundary layer develops unsteady streaky structures with high and low streamwise velocity. This leads to large amplitude low frequency fluctuations inside the boundary layer although the mean flow is still close to the laminar profile. Breakdown to turbulence occurs through an instability of the streaks which leads to the formation of turbulent spots. Accurate physical modelling of these processes seems to be needed in order to obtain a reliable prediction method.

Bypass Transition Modelling: A New Method Which Accounts for Free-Stream Turbulence Intensity and Length Scale

2000 ◽  
Author(s):  
Paul E. Roach ◽  
David H. Brierley
Keyword(s):  
Boundary Layer ◽  
Turbulence Intensity ◽  
Free Stream ◽  
Leading Edge ◽  
Boundary Layer Transition ◽  
Test Surface ◽  
Length Scale ◽  
Pressure Gradients ◽  
Layer Transition ◽  
Free Stream Turbulence

The publication of the present authors’ boundary layer transition data in 1992 (now widely known as the ERCOFTAC test case T3) has led to a spate of new experimental and modelling efforts aimed at improving our understanding of this problem. This paper describes a new method of determining boundary layer transition with zero mean pressure gradient. The approach examines the development of a laminar boundary layer to the start of transition, accounting for the influences of free-stream turbulence and test surface geometry. It is presented as a “proof of concept”, requiring a significant amount of work before it can be considered as a practically applicable model for transition prediction. The method is based upon one first put forward by G.I. Taylor in the 1930’s, and accounts for the action of local, instantaneous pressure gradients on the developing laminar boundary layer. These pressure gradients are related to the intensity and length scale of turbulence in the free-stream using Taylor’s simple isotropic model. The findings demonstrate the need to account for the separate influences of free-stream turbulence intensity and length scale when considering the transition process. Although the length scale has less of an effect than the intensity, its influence is, nevertheless, significant and must not be overlooked. This fact goes a long way towards explaining the large scatter to be found in simple correlations which involve only the turbulence intensity. Intriguingly, it is demonstrated that it is the free-stream turbulence at the leading edge of the test surface which is important, not that found locally outside the boundary layer. The additional influence of leading edge geometry is also shown to play a major role in fixing the point at which transition begins. It is suggested that the leading edge geometry will distort the incident turbulent eddies, modifying the effective “free-stream” turbulence properties. Consequently, it is shown that the scale of the eddies relative to the leading edge thickness is a further important parameter, and helps bring together a large number of test cases.

Relation Between Disturbance of Boundary Layer and Free Stream Turbulence Component

2011 ◽  
Author(s):  
Ryohei Norimatsu ◽  
Shogo Takai ◽  
Masaharu Matsubara
Keyword(s):  
Boundary Layer ◽  
Free Stream ◽  
Plate Boundary ◽  
Prediction Method ◽  
Leading Edge ◽  
Boundary Layer Transition ◽  
Experimental Investigations ◽  
Major Step ◽  
Layer Transition ◽  
Free Stream Turbulence

In a flat plate boundary layer subjected to isotropic free stream turbulence of few percents turbulence intensity, the streaks, which longitudinally elongated regions of high and low streamwise velocity, appear in the boundary layer and then break down to turbulent spots. Experiments and DNS have revealed that the profile of the streamwise fluctuation energy has a peak at the middle of boundary layer and that the disturbance grows in proportion to the streamwise distance from the leading edge. These results were in good agreement with the non-modal theory. Though the theory suggested that in lower free stream turbulent case modal disturbance has chance to develop and breakdown to turbulence, experimental investigations have not clarified the maximum intensity of the free stream turbulence at which the modal disturbance triggers transition. It is know that there are other processes of the boundary transition that start with a short streak breakdown. In this study various types of the free stream turbulence including anisotropic turbulence are scrutinized using turbulence grids and their relation to the disturbance growth in the boundary layer is investigated. The result with hot-wire measurements shows that the spanwise spectra of the free stream turbulence are essential factor for the non-modal growth. This would be a major step for developing prediction method of boundary layer transition.

An experimental study of boundary layer transition induced by a cylinder wake

2011 ◽  
Vol 684 ◽  
pp. 60-84 ◽  
Author(s):  
A. C. Mandal ◽  
J. Dey
Keyword(s):  
Boundary Layer ◽  
Reynolds Number ◽  
Late Stage ◽  
Free Stream ◽  
Experimental Studies ◽  
Boundary Layer Transition ◽  
Bypass Transition ◽  
Mean Flow ◽  
Layer Transition ◽  
Free Stream Turbulence

AbstractBoundary layer transition induced by the wake of a circular cylinder in the free stream has been investigated using the particle image velocimetry technique. Some differences between simulation and experimental studies have been reported in the literature, and these have motivated the present study. The appearance of spanwise vortices in the early stage is further confirmed here. A spanwise vortex appears to evolve into a $ \mrm{\Lambda} $/hairpin vortex; the flow statistics also confirm such vortices. With increasing Reynolds number, based on the cylinder diameter, and with decreasing cylinder height from the plate, the physical size of these hairpin-like structures is found to decrease. Some mean flow characteristics, including the streamwise growth of the disturbance energy, in a wake-induced transition resemble those in bypass transition induced by free stream turbulence. Streamwise velocity streaks that are eventually generated in the late stage often undergo sinuous-type oscillations. Similar to other transitional flows, an inclined shear layer in the wall-normal plane is often seen to oscillate and shed vortices. The normalized shedding frequency of these vortices, estimated from the spatial spacing and the convection velocity of these vortices, is found to be independent of the Reynolds number, similar to that in ribbon-induced transition. Although the nature of free stream disturbance in a wake-induced transition and that in a bypass transition are different, the late-stage features including the flow breakdown characteristics of these two transitions appear to be similar.

Effects of Reynolds Number and Free-Stream Turbulence on Boundary Layer Transition in a Compressor Cascade

2000 ◽  
Author(s):  
Heinz-Adolf Schreiber ◽  
Wolfgang Steinert ◽  
Bernhard Küsters
Keyword(s):  
Boundary Layer ◽  
Free Stream ◽  
Reynolds Numbers ◽  
Boundary Layer Transition ◽  
Bypass Transition ◽  
Layer Transition ◽  
Free Stream Turbulence ◽  
High Reynolds Numbers ◽  
High Turbulence ◽  
High Reynolds

An experimental and analytical study has been performed on the effect of Reynolds number and free-stream turbulence on boundary layer transition location on the suction surface of a controlled diffusion airfoil (CDA). The experiments were conducted in a rectilinear cascade facility at Reynolds numbers between 0.7 and 3.0×106 and turbulence intensities from about 0.7 to 4%. An oil streak technique and liquid crystal coatings were used to visualize the boundary layer state. For small turbulence levels and all Reynolds numbers tested the accelerated front portion of the blade is laminar and transition occurs within a laminar separation bubble shortly after the maximum velocity near 35–40% of chord. For high turbulence levels (Tu > 3%) and high Reynolds numbers transition propagates upstream into the accelerated front portion of the CDA blade. For those conditions, the sensitivity to surface roughness increases considerably and at Tu = 4% bypass transition is observed near 7–10% of chord. Experimental results are compared to theoretical predictions using the transition model which is implemented in the MISES code of Youngren and Drela. Overall the results indicate that early bypass transition at high turbulence levels must alter the profile velocity distribution for compressor blades that are designed and optimized for high Reynolds numbers.

Effects of Concave Curvature on Boundary Layer Transition Under High Free-Stream Turbulence Conditions

2001 ◽  
Author(s):  
Michael P. Schultz ◽  
Ralph J. Volino
Keyword(s):  
Boundary Layer ◽  
Free Stream ◽  
Turbulent Transport ◽  
Boundary Layer Transition ◽  
Transitional Flow ◽  
Turbulent Shear ◽  
Radius Of Curvature ◽  
Layer Transition ◽  
Free Stream Turbulence ◽  
Turbulent Shear Stress

An experimental investigation has been carried out on a transitional boundary layer subject to high (initially 9%) free-stream turbulence, strong acceleration K=ν/Uw2dUw/dxas high as9×10-6, and strong concave curvature (boundary layer thickness between 2% and 5% of the wall radius of curvature). Mean and fluctuating velocity as well as turbulent shear stress are documented and compared to results from equivalent cases on a flat wall and a wall with milder concave curvature. The data show that curvature does have a significant effect, moving the transition location upstream, increasing turbulent transport, and causing skin friction to rise by as much as 40%. Conditional sampling results are presented which show that the curvature effect is present in both the turbulent and non-turbulent zones of the transitional flow.

Sign in / Sign up

Export Citation Format

Share Document