A Modified Gradient Plasticity Theory for Micro-Bending and Micro-Torsion Size Effects

Author(s):  
George Z. Voyiadjis ◽  
Rashid K. Abu Al-Rub

The definition and magnitude of the intrinsic length scale are keys to the development of the theory of plasticity that incorporates size effects. Gradient plasticity theory with a material length scale parameter is successfully in capturing the size dependence of material behavior at the micron scale. However, a fixed value of the material length-scale is not always realistic and that different problems could require different values. Moreover, a linear coupling between the local and non-local terms in the gradient plasticity theory is not always realistic and that different problems could require different couplings. A generalized gradient plasticity model with a non-fixed length scale parameter is proposed. This model assesses the sensitivity of predictions in the way in which the local and non-local parts are coupled. The proposed model gives good predictions of the size effect in micro-bending tests of thin films and micro-torsion tests of thin wires.

2009 ◽  
Vol 24 (3) ◽  
pp. 1197-1207 ◽  
Author(s):  
B. Backes ◽  
Y.Y. Huang ◽  
M. Göken ◽  
K. Durst

In the present work a new equation to determine the internal material length scale for strain gradient plasticity theories from two independent experiments (uniaxial and nanoindentation tests) is introduced. The applicability of the presented equation is verified for conventional grained as well as for ultrafine-grained copper and brass with different amounts of prestraining. A significant decrease of the experimentally determined internal material length scale is found for increasing dislocation densities due to prestraining. Conventional mechanism strain gradient plasticity theory is used for simulating the indentation response, using experimentally determined material input data as the yield stress, the work-hardening behavior and the internal material length scale. The work-hardening behavior and the yield stress were taken from the uniaxial experiments, whereas the internal material length scale was calculated using the yield stress from the uniaxial experiment, the macroscopic hardness H0 and the length scale parameter h* following from the nanoindentation experiment. A good agreement between the measured and calculated load–displacement curve and the hardness is found independent of the material and the microstructure.


2018 ◽  
Vol 2018 ◽  
pp. 1-17 ◽  
Author(s):  
Dang Van Hieu

In this paper, post-buckling and free nonlinear vibration of microbeams resting on nonlinear elastic foundation subjected to axial force are investigated. The equations of motion of microbeams are derived by using the modified couple stress theory. Using Galerkin’s method, the equation of motion of microbeams is reduced to the nonlinear ordinary differential equation. By using the equivalent linearization in which the averaging value is calculated in a new way called the weighted averaging value, approximate analytical expressions for the nonlinear frequency of microbeams with pinned–pinned and clamped–clamped end conditions are obtained in closed-forms. Comparisons with previous solutions are showed accuracy of the present solutions. Effects of the material length scale parameter and the axial compressive force on the frequency ratios of microbeams; and effect of the material length scale parameter on the buckling load ratios of microbeams are investigated in this paper.


2011 ◽  
Vol 110-116 ◽  
pp. 4178-4186
Author(s):  
H. Nourbakhsh ◽  
R. Mohammadzadeh ◽  
M. Rafiee ◽  
R. Rafiee

Nonlinear free and forced oscillation of microscale simply supported beams is investigated in this paper. Introducing a material length scale parameter, the nonlinear model is conducted within the context of non-classical continuum mechanics. By using a combination of the modified couple stress theory and Hamilton’s principle the nonlinear equation of motion is derived. The nonlinear frequencies of a beam with initial lateral displacement are discussed. Equations have been solved using an exact method for free vibration and multiple times scales (MTS) method for forced vibration and some analytical relations have been obtained for natural frequency of oscillations. The results have been compared with previous work and good agreement has been obtained. Also forced vibrations of system in primary resonance have been studied and the effects of different parameters on the frequency-response have been investigated. It is shown that the size effect is significant when the ratio of characteristic thickness to internal material length scale parameter is approximately equal to one, but is diminishing with the increase of the ratio. Our results also indicate that the nonlinearity has a great effect on the vibration behavior of microscale beams.


2019 ◽  
Vol 40 (12) ◽  
pp. 1695-1722 ◽  
Author(s):  
Lu Lu ◽  
Li Zhu ◽  
Xingming Guo ◽  
Jianzhong Zhao ◽  
Guanzhong Liu

AbstractIn this paper, a novel size-dependent functionally graded (FG) cylindrical shell model is developed based on the nonlocal strain gradient theory in conjunction with the Gurtin-Murdoch surface elasticity theory. The new model containing a nonlocal parameter, a material length scale parameter, and several surface elastic constants can capture three typical types of size effects simultaneously, which are the nonlocal stress effect, the strain gradient effect, and the surface energy effects. With the help of Hamilton’s principle and first-order shear deformation theory, the non-classical governing equations and related boundary conditions are derived. By using the proposed model, the free vibration problem of FG cylindrical nanoshells with material properties varying continuously through the thickness according to a power-law distribution is analytically solved, and the closed-form solutions for natural frequencies under various boundary conditions are obtained. After verifying the reliability of the proposed model and analytical method by comparing the degenerated results with those available in the literature, the influences of nonlocal parameter, material length scale parameter, power-law index, radius-to-thickness ratio, length-to-radius ratio, and surface effects on the vibration characteristic of functionally graded cylindrical nanoshells are examined in detail.


Sign in / Sign up

Export Citation Format

Share Document