Integrating First-Principle Calculation and Phase-Field Simulation for Lithium Dendritic Growth on the Anode of a Lithium-Ion Battery

Author(s):  
Lei Chen

Lithium (Li) dendrite formation compromises the reliability of Li-ion batteries, either because dendrite pieces lose electrical contractor or growing dendrite penetrates the separator and leads to internal short-circuiting. In this paper, a multi-scale computational approach integrating phase-field model and first-principles calculation is proposed to predict the Li dendrite formation at the anode/electrolyte interface of Li-ion batteries. The first-principles calculation is employed to atomically determine the interfacial energy, which is subsequently fed into the phase-field model at the micro-scale. 1D distribution of fields is first analyzed to validate the proposed model. An apparent 2D tree-type Li dendrite, widely observed in experiments during electrodeposition, is produced using the model. Finally, the 2D dendritic evolution under different electrochemical conditions specified by the applied current densities is discussed.

2014 ◽  
Vol 61 (8) ◽  
pp. 1-9 ◽  
Author(s):  
H.-W. Zhang ◽  
Z. Liu ◽  
L. Liang ◽  
L. Chen ◽  
Y. Qi ◽  
...  

2021 ◽  
Vol 894 ◽  
pp. 61-66
Author(s):  
Rui Zhi Dong

Due to the development of various mobile electronic devices, such as electric vehicles, rechargeable ion batteries are becoming more and more important. However, the current commercial lithium-ion batteries have obvious defects, including poor safety from Li dendrite and flammable electrolyte, quick capacity loss and low charging and discharging rate. It is very important to find a better two-dimensional material as the anode of the battery to recover the disadvantages. In this paper, first principles calculations are used to explore the performances of VS2 bilayer and VS2 / graphene heterostructure as the anodes of Li ion batteries. Based on the calculation of the valences, binding energy, intercalation voltage, charge transfer and diffusion barrier of Li, it is found that the latter can be used as a better anode material from the perspective of insertion voltage and binding energy. At the same time, the former one is better in terms of diffusion barrier. Our study provides a comprehensive understanding on VS2 based 2D anodes.


2017 ◽  
Vol 29 (1) ◽  
pp. 118-145 ◽  
Author(s):  
E. MECA ◽  
A. MÜNCH ◽  
B. WAGNER

In this study, we present a phase-field model that describes the process of intercalation of Li ions into a layer of an amorphous solid such as amorphous silicon (a-Si). The governing equations couple a viscous Cahn–Hilliard-Reaction model with elasticity in the framework of the Cahn–Larché system. We discuss the parameter settings and flux conditions at the free boundary that lead to the formation of phase boundaries having a sharp gradient in lithium ion concentration between the initial state of the solid layer and the intercalated region. We carry out a matched asymptotic analysis to derive the corresponding sharp-interface model that also takes into account the dynamics of triple points where the sharp interface intersects the free boundary of the Si layer. We numerically compare the interface motion predicted by the sharp-interface model with the long-time dynamics of the phase-field model.


2020 ◽  
Vol 49 (9) ◽  
pp. 5523-5527
Author(s):  
Wenhua Liu ◽  
Huihui Xu ◽  
Qinghua Zhou ◽  
Yuwen Dai ◽  
Wei Hu ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document