Computational Envision of Structural, Electronic, Mechanical and Thermoelectric Properties of PdXSn (X=Zr, Hf) half Heusler compounds

Half heusler compounds have gained attention due to their excellent properties and good thermal stability. In this paper, using first principle calculation and Boltzmann transport equation, we have investigated structural, electronic, mechanical and thermoelectric properties of PdXSn (X=Zr,Hf) half Heusler materials. These materials are indirect band gap semiconductors with band gap of 0.52 (0.44) for PdZrSn (PdHfSn). Calculations of elastic and phonon characteristics show that both materials are mechanically and dynamically stable. At 300K the magnitude of lattice thermal conductivity observed for PdZrSn is 15.16 W/mK and 9.53 W/mK for PdHfSn. The highest ZT value for PdZrSn and PdHfSn is 0.32 and 0.4 respectively.

Investigative properties of CeO2 doped with niobium: A combined characterization and DFT studies

Catalytic capacity of ceria mainly stems from a facile switch in the Ce oxidation states from +4 to +4 − x. While various experimental and computational studies pinpoint the reduction chemistry of Ce atom through the creation of oxygen vacancies, the analogous process when ceria surface is decorated with cations remains poorly understood. Where such results are available, a synergy between experimental and first principle calculation is scarce. Niobium materials are evolving and their use in catalysis is being widely investigated due to their high surface acidity and thermal and chemical stability. This study aims to report structural and electronic properties of various configurations of mixed Ce–Nb oxides and elaborates on factors that underpin potential catalytic improvements. Evaluations of the samples through X-ray diffraction (XRD), Fourier transform infrared (FTIR), N2-adsorption–desorption, scanning electron microscope (SEM), energy dispersive spectroscope (EDS), and thermogravimetric (TGA) analyses are examined and discussed. First principles density functional theory (DFT) calculations provide structural features of the Ce–Nb solutions at low concentration of Nb via computing atomic charge distribution. Contraction in the lattice parameter after Nb doping was confirmed with both XRD and DFT results. SEM analysis reveals particle growth at the loading of 50 wt%. FTIR results established the Ce–Nb–O bond at 1,100 cm−1 and the TGA analysis confirms the thermal stability of Nb-doped ceria. Tetrahedral O atoms demonstrate an increase in electronegativity and this in turn facilitates catalytic propensity of the material because the O atoms will exhibit higher affinity for adsorbed reactants. Cerium oxide (CeO2) after Nb doping displays a noticeable band gap narrowing, confirming the possible improvement in the catalytic behavior. The 4d states of the Niobium pentoxide (Nb2O5) is found to fill up the 4f states of CeO2 around the Fermi energy level promoting electrons excitation in the CeO2. Reported electronic, structural, and thermal characteristics herein indicate promising catalytic applications of niobium-promoted ceria.

Deep level transient spectroscopy and photoluminescence studies of hole and electron traps in ZnSnP2 bulk crystals

ZnSnP2, an emerging inorganic material for solar cells, was characterized by deep level transient spectroscopy (DLTS) and photoluminescence (PL). Acceptor- and donor-like traps with shallow energy levels were detected by DLTS analysis. The previous study based on first-principle calculation also suggested such traps were due to antisite defects of Zn and Sn. PL measurements also revealed sub-gap transitions related to these trap levels. Additionally, DLTS found a trap with deep level in ZnSnP2. A short lifetime of minority carrier in previous work might be due to such trap, coming from phosphorus vacancies and/or zinc interstitials suggested by first-principle study.

Electronic structure and Thermoelectric Properties of Hybrid Organic-Inorganic Perovskites [NH3-(CH2)3-COOH]2CdCl4

In this work, we conducted the first principle calculation of electronic structure and transport properties of [NH3-(CH2)3-COOH]2CdCl4 (Acid-Cd). The generalized gradient approximation is used in structural optimization and electronic structure. The theoretical band gap value found is in good agreement with experimental. Electronic thermal conductivity, electrical conductivity, Seebeck coefficient (S) and figure of merit (ZT) have been calculated using semi-local Boltzmann theory to predict the thermoelectric characteristic of the studied materials.

First-Principle Study on p-n Control of PEDOT-Based Thermoelectric Materials by PTSA Doping

PEDOT:Tos, a PSS-free PEDOT-based material, is a promising possible organic thermoelectric material for a practical conversion module because the material reportedly has a large power factor. However, since PEDOT:Tos is mainly reported to be a p-type thermoelectric material, the development of PSS-free PEDOT with n-type thermoelectric properties is desirable. Thus, in order to search for PSS-free PEDOT with n-type thermoelectric properties, we investigated the doping concentration of PTSA dependence of the thermoelectric property using the first-principle calculation. The band structure and the density of state indicated that the n-type thermal electromotive force was attributed to the electrons’ large effective mass. Such electrons were produced thanks to the binding of the dopant PTSA to the benzene ring. The contribution of the electron to the Seebeck coefficient increased with increasing PTSA doping concentrations.

Fractal Analysis on Pore Structure and Hydration of Magnesium Oxysulfate Cements by First Principle, Thermodynamic and Microstructure-Based Methods

Magnesium oxysulfate (MOS) cement is a typical eco-friendly cementitious material, which presents excellent performances. In this work, a novel multiscale modeling strategy is proposed to simulate the hydration and pore structure of MOS cement system. This work collected and evaluated the Gibbs free energy of formation for main hydrates and equilibrium constant of main reactions in MOS cement system based on a first principle calculation using Material Studio. Followingly, the equilibrium phase compositions of MOS cement system were simulated through PHREEQC to investigate the molar ratio dependence of equilibrium phase compositions. Results showed that large M (MgO/MgSO4) was beneficial for the formation of 5Mg(OH)2·MgSO4·7H2O (Phase 517) and large H (H2O/MgSO4) tended to decompose MOS cement paste and cause leaching. The microstructure-based method visualized the hydration status of MOS cement systems at initial and ultimate stages via MATLAB and the results showed that large M was significant to reduce porosity, and similar results for the case of small H. Fractal analysis confirms that fractal dimension of pore structure (Df) was significantly decreased after the hydration of MOS and was positively correlated to the porosity of the paste. In addition, it can be referred that large M and small H were beneficial for modifying the microstructure of MOS paste by decreasing the value of Df.