A broadband energy‐based boundary element method for predicting vehicle interior noise

2004 ◽  
Vol 115 (5) ◽  
pp. 2538-2538 ◽  
Author(s):  
Linda Franzoni ◽  
Jerry Rouse ◽  
Tracy DuVall
Keyword(s):  
Boundary Element Method ◽  
Boundary Element ◽  
Interior Noise ◽  
Vehicle Interior ◽  
Vehicle Interior Noise ◽  
Element Method

A BOUNDARY-ELEMENT METHOD FOR ATOMIZATION OF A FINITE LIQUID JET

1995 ◽  
Vol 5 (6) ◽  
pp. 621-638 ◽  
Author(s):  
J. H. Hilbing ◽  
Stephen D. Heister ◽  
C. A. Spangler
Keyword(s):  
Boundary Element Method ◽  
Boundary Element ◽  
Liquid Jet ◽  
Element Method

Application of the Boundary Element Method and Modal Analysis to Tire Acoustics Problems

1993 ◽  
Vol 21 (2) ◽  
pp. 66-90 ◽  
Author(s):  
Y. Nakajima ◽  
Y. Inoue ◽  
H. Ogawa
Keyword(s):  
Finite Element ◽  
Boundary Element Method ◽  
Boundary Element ◽  
Acoustic Radiation ◽  
Traffic Noise ◽  
Noise Prediction ◽  
Prediction System ◽  
Tire Noise ◽  
Acoustic Contribution ◽  
Element Method

Abstract Road traffic noise needs to be reduced, because traffic volume is increasing every year. The noise generated from a tire is becoming one of the dominant sources in the total traffic noise because the engine noise is constantly being reduced by the vehicle manufacturers. Although the acoustic intensity measurement technology has been enhanced by the recent developments in digital measurement techniques, repetitive measurements are necessary to find effective ways for noise control. Hence, a simulation method to predict generated noise is required to replace the time-consuming experiments. The boundary element method (BEM) is applied to predict the acoustic radiation caused by the vibration of a tire sidewall and a tire noise prediction system is developed. The BEM requires the geometry and the modal characteristics of a tire which are provided by an experiment or the finite element method (FEM). Since the finite element procedure is applied to the prediction of modal characteristics in a tire noise prediction system, the acoustic pressure can be predicted without any measurements. Furthermore, the acoustic contribution analysis obtained from the post-processing of the predicted results is very helpful to know where and how the design change affects the acoustic radiation. The predictability of this system is verified by measurements and the acoustic contribution analysis is applied to tire noise control.

Plane Wave Resonance in the Tire Air Cavity as a Vehicle Interior Noise Source

1995 ◽  
Vol 23 (1) ◽  
pp. 2-10 ◽  
Author(s):  
J. K. Thompson
Keyword(s):  
Closed Form Solution ◽  
Form Solution ◽  
Interior Noise ◽  
Cavity Resonance ◽  
Test Results ◽  
Vehicle Interior ◽  
Air Cavity ◽  
Vehicle Interior Noise ◽  
Wave Resonance ◽  
Resonance Frequencies

Abstract Vehicle interior noise is the result of numerous sources of excitation. One source involving tire pavement interaction is the tire air cavity resonance and the forcing it provides to the vehicle spindle: This paper applies fundamental principles combined with experimental verification to describe the tire cavity resonance. A closed form solution is developed to predict the resonance frequencies from geometric data. Tire test results are used to examine the accuracy of predictions of undeflected and deflected tire resonances. Errors in predicted and actual frequencies are shown to be less than 2%. The nature of the forcing this resonance as it applies to the vehicle spindle is also examined.

Sign in / Sign up

Export Citation Format

Share Document