Plasmonic excitations in two-dimensional materials: effects of structural symmetry and material anisotropy

Plasmonics in two-dimensional materials, an emerging direction of nano-optics, has attracted great attention recently, which exhibits unique properties than that in noble metals. Extending its advanced features by different manipulations is very beneficial for its promotion. In this paper, we study plasmonic excitations in graphene and black phosphorus (BP) nanostructures, where the effects of structural symmetry and material anisotropy are discussed. We show that the two factors are crucial to mode excitations, e.g. the extinction can be dominated by higher order modes rather than dipole resonance. The behavior occurs only in the direction hosting larger resonance frequencies, e.g. armchair (AC) direction of BP and shorter side of graphene rectangles. In BP rectangles along AC direction, the two factors are competing, and thus can be applied cooperatively to tune plasmonic resonance, from dipole to higher order excitations. Besides, the manipulation can also be achieved by designing BP square rings, in which the interaction between outer and inner edges show great impact on mode excitations. Our studies further promote the understanding of plasmonics in two-dimensional materials, and will pave the way for particular plasmonic applications.

Elastodynamic Behaviour of Laminate Structures with Soft Thin Interlayers: Theory and Experiment

Laminate structures composed of stiff plates and thin soft interlayers are widely used in aerospace, automotive and civil engineering encouraging the development of reliable non-destructive strategies for their condition assessment. In the paper, elastodynamic behaviour of such laminate structures is investigated with emphasis on its application in ultrasonic based NDT and SHM for the identification of interlayer mechanical and interfacial contact properties. A particular attention is given to the practically important frequency range, in which the wavelength considerably exceeds the thickness of the film. Three layer model with spring-type boundary conditions employed for imperfect contact simulation is used for numerical investigation. Novel effective boundary conditions are derived via asymptotic expansion technique and used for analysis of the peculiar properties of elastic guided waves in considered laminates. It is revealed that the thin and soft film influences the behaviour of the laminate mainly via the effective stiffnesses being a combination of the elastic moduli of the film, its thickness and interface stiffnesses. To evaluate each of these parameters separately (or to figure out that the available experimental data are insufficient), a step-wise procedure employing the effective boundary conditions is proposed and tested versus the laser Doppler vibrometry data for Lamb waves in Aluminium/Polymer film/Alumunium structure. The possibility of using film-related thickness resonance frequencies to estimate the film properties and contact quality is also demonstrated. Additionally, the rich family of edge waves is also investigated, and the splitting of fundamental edge waves into pairs is revealed.

Design and Optimization of the Dual-Mode Lamb Wave Resonator and Dual-Passband Filter

Radio frequency (RF) filters with multiple passbands can meet the needs of miniaturization and integration for 5G communications. This paper reports a dual-mode Lamb wave resonator (DLWR) and a dual-passband filter based on DLWRs. The DLWR consists of a piezoelectric film and two interdigital electrode (IDT) arrays with different thicknesses, which leads to the coexistence of two main modes in the resonator. The resonance frequencies of the two modes can be adjusted separately by changing the thicknesses of the IDTs, which greatly satisfies the requirements of the dual-passband filter. Four DLWRs with different electrode configurations are designed, and the influences of the periodic length and thicknesses of the IDTs on the performance of the DLWR are studied. When the thickness of the piezoelectric layer is 0.75 μm and the two thicknesses of the IDTs are 0.1 μm and 0.3 μm, the resonance frequency of the second main mode is 1.27 GHz higher than the resonance frequency of the first main mode in the DLWR. Furthermore, a dual-passband filter based on the proposed DLWRs is demonstrated with an insertion loss less than 1 dB and a band rejection of about 15 dB. Moreover, two passbands at 2.45 GHz and 3.88 GHz with bandwidths of 66 MHz and 112 MHz, respectively, are achieved. The presented DLWR shows a potential application that can be used to obtain RF filters with adjustable dual passbands.

Assessment of Substrate and TBC Damage Effects on Resonance Frequencies for Blade Health Monitoring

The reliability of critical aircraft components continues to shift towards onboard monitoring to optimize maintenance scheduling, economy efficiency and safety. Therefore, the present study investigates changes in dynamic behavior of turbine blades for the detection of defects, with focus on substrate cracks and TBC spallation as they relate to vibration modes 1 to 6. Two‐dimensional and three-dimensional finite element simulation is used. The results indicate that TBC spallation reduces natural frequencies due to the ensuing hot spot and overall increase in temperature, leading to drops in blade stiffness and strength. Cracks cause even larger frequency shifts due to local plastic deformation at the crack that changes the energy dissipation behavior. Mode 1 vibration shows the largest shifts in natural frequencies that best correlate to the size of defects and their position. As such, it may be most appropriate for the early assessment of the severity and location of defects.

Static and dynamic formant scaling conveys body size and aggression

When producing intimidating aggressive vocalizations, humans and other animals often extend their vocal tracts to lower their voice resonance frequencies (formants) and thus sound big. Is acoustic size exaggeration more effective when the vocal tract is extended before, or during, the vocalization, and how do listeners interpret within-call changes in apparent vocal tract length? We compared perceptual effects of static and dynamic formant scaling in aggressive human speech and nonverbal vocalizations. Acoustic manipulations corresponded to elongating or shortening the vocal tract either around (Experiment 1) or from (Experiment 2) its resting position. Gradual formant scaling that preserved average frequencies conveyed the impression of smaller size and greater aggression, regardless of the direction of change. Vocal tract shortening from the original length conveyed smaller size and less aggression, whereas vocal tract elongation conveyed larger size and more aggression, and these effects were stronger for static than for dynamic scaling. Listeners familiarized with the speaker's natural voice were less often ‘fooled’ by formant manipulations when judging speaker size, but paid more attention to formants when judging aggressive intent. Thus, within-call vocal tract scaling conveys emotion, but a better way to sound large and intimidating is to keep the vocal tract consistently extended.

Mode spectra of magnetic and dielectric plasmon spheres obtained from Mie scattering and free oscillation theories

This paper presents Mie scattering theory as compared to rigorous electromagnetic theory of free oscillations in magnetic and electric plasmon spheres. It is shown that the maxima of Mie scattering and absorption spectra well correspond to resonance frequencies of plasmon modes occurring in dielectric and magnetic spheres, similarly as it takes place for ordinary dielectric resonator modes. Mie theory is well applicable to determine resonance frequencies and scattering parameters of spherical plasmons. However, this theory cannot be applied to determine intrinsic properties of modes induced in the object by the incident plane wave, like quality factors. On the contrary, rigorous electromagnetic theory of free oscillations allows one to determine the complex resonance frequency of each mode that can occur in a given object, and the corresponding quality factor accounting for various kind of losses, including medium and radiation losses. The advantage of the free oscillations theory, as shown in this paper, is in the determination of the quality factors of modes occurring in magnetic plasmon spheres made of a strongly dispersive magnetic medium. Graphical Abstract

Research on split and evolution of acoustic cavity resonance frequency of rotating loaded tire

The tire acoustic cavity resonance noise (TACRN) is known to contribute to audible noise in the passenger compartment of a vehicle. In order to reduce TACRN effectively, its mechanism needs to be grasped better. In this paper, the calculation formulas of tire acoustic cavity resonance frequency for four different conditions such as static unloaded tire, static loaded tire, rotating unloaded tire, and rotating loaded tire are analyzed and verified by the simulation and experiment. In particular, the resonance frequency formulas of static loaded tire introducing inflation pressure and rotating loaded tire are proposed and verified, respectively, in this paper. And the influence of tire inflation pressure, load, and running velocity on splitting frequency are studied. Some new findings are described and discussed; for example, the first-order resonance frequency may split into four resonance frequencies in most cases, and may split into three resonance frequencies in certain cases when a loaded tire is rotating. And the existing conditions for three and four resonance frequencies are also discussed.

INFLUENCE OF FRICTION IN THE ARMORED FACE CONVEYOR CHAIN ON DYNAMICS AND ENERGY EFFICIENCY

The range of values ​​of the coefficient of resistance to movement of the chain of typical longwall armored face conveyors and the coefficient of inner viscous friction in the chain, both immersed in the moving load and during the idle run of the conveyor, is estimated. The computer model of the conveyor is built as a multi-mass elastic-viscous stretched closed chain without sag with the number of masses n = 200 and one induction drive motor located in the head of the conveyor. Using the constructed model, three-dimensional space-time dynamic characteristics of speeds and forces in the chain of the CP72 longwall armored face conveyor are obtained. Start up to rated speed v≈1 m / s and the working process is simulated with an unloaded conveyor. The spatial form of frictional self-oscillations in the model with distributed parameters is shown. The resonance frequencies and amplitudes of oscillations of the efforts in the circuit and the length of the corresponding spatial waves have been determined. It was found that at the first and second resonance frequencies, self-oscillations are not excited, since the damping effect of the electric drive is quite pronounced in this frequency band. The direct connection of vibration amplitudes with the energy efficiency of the conveyor electric drive is indicated.

ROLE OF «MAGIC» HCP NUMBERS IN STABILITY OF THE INTERNAL STRUCTURE OF Ag AND Ag NANOCLUSTERS

В настоящее время серебро активно применяется в микроэлектронике, в основном благодаря своей высокой электро- и теплопроводности. Учет процессов взаимодействия между металлом и световой волной (плазмонные эффекты) дает совершенно новые технические приложения серебра. Эти приложения становятся возможными благодаря сильному взаимодействию между падающим светом и свободными электронами в наноструктурах. К настоящему времени уже стало понятно, что размер, форма и структура наночастиц определяют их плазмонные свойства, в том числе резонансные частоты. Следовательно, подгонкой размера, внешнего вида металлической наноструктуры и ее внутреннего строения, можно управлять светом с очень большой степенью точности. В данной работе методом молекулярной динамики с использованием модифицированного потенциала сильной связи TB-SMA (second moment approximation of tight-binding) были изучены границы термической стабильности различной исходной структурной фазы в малых кластерах серебра с числом атомов, соответствующим «магическим» числам ГПУ структуры. Было показано, что характер термически индуцированных структурных переходов в исследуемых группах нанокластеров резко отличается. Данный факт может позволить создать малые кластеры серебра с требуемым внутренним строением. Currently, silver is actively used in microelectronics, mainly due to its high electrical and thermal conductivity. Taking into account the processes of interaction between a metal and a light wave (plasmon effects) gives completely new technical applications of silver. These applications are made possible by the strong interaction between incident light and free electrons in nanostructures. By now, it has already become clear that the size, shape, and structure of nanoparticles determine their plasmon properties, including resonance frequencies. Therefore, by adjusting the size, appearance of the metal nanostructure and its internal structure, it is possible to control light with a very high degree of accuracy. In this work, the boundaries of thermal stability of various initial structural phases in small silver clusters with the number of atoms corresponding to the «magic» numbers of the hcp structure were studied by the molecular dynamics method using the modified tight-binding potential TB-SMA (second moment approximation of tight-binding). It was shown that the nature of thermally induced structural transitions in the groups of nanoclusters under study differs sharply. This fact can make it possible to create small silver clusters with the required internal structure.