Trajectories of ballistic ejecta from the Chicxulub Crater

Author(s):  
Walter Alvarez
2017 ◽  
Author(s):  
David A. Kring ◽  
◽  
Martin Schmieder ◽  
Ulrich Riller ◽  
Sarah L. Simpson ◽  
...  

2021 ◽  
Vol 10 (1) ◽  
Author(s):  
Hiroyuki Yamada ◽  
Kohei Tateyama ◽  
Shino Naruke ◽  
Hisashi Sasaki ◽  
Shinichi Torigata ◽  
...  

AbstractThe destruction caused by ballistic ejecta from the phreatic eruptions of Mt. Ontake in 2014 and Mt. Kusatsu-Shirane (Mt. Moto-Shirane) in 2018 in Japan, which resulted in numerous casualties, highlighted the need for better evacuation facilities. In response, some mountain huts were reinforced with aramid fabric to convert them into shelters. However, a number of decisions must be made when working to increase the number of shelters, which depend on the location where they are to be built. In this study, we propose a method of using high-strength steel to reinforce wooden buildings for use as shelters. More specifically, assuming that ballistic ejecta has an impact energy of 9 kJ or more, as in previous studies, we developed a method that utilizes SUS304 and SS400 unprocessed steel plates based on existing impact test data. We found that SUS304 is particularly suitable for use as a reinforcing material because it has excellent impact energy absorption characteristics due to its high ductility as well as excellent corrosion resistance. With the aim of increasing the structural strength of steel shelters, we also conducted an impact test on a shelter fabricated from SS400 deck plates (i.e., steel with improved flexural strength provided by work-hardened trapezoidal corrugated plates). The results show that the shelter could withstand impact with an energy of 13.5 kJ (2.66 kg of simulated ballistic ejecta at 101 m/s on impact). In addition, from the result of the impact test using the roof-simulating structure, it was confirmed the impact absorption energy is further increased when artificial pumice as an additional protective layer is installed on this structure. Observations of the shelter after the impact test show that there is still some allowance for deformation caused by projectile impact, which means that the proposed steel shelter holds promise, not only structurally, but also from the aspects of transportation and assembly. Hence, the usefulness of shelters that use steel was shown experimentally. However, shelter construction should be suitable for the target environment.


Science ◽  
1992 ◽  
Vol 257 (5072) ◽  
pp. 954-958 ◽  
Author(s):  
C. C. Swisher ◽  
J. M. Grajales-Nishimura ◽  
A. Montanari ◽  
S. V. Margolis ◽  
P. Claeys ◽  
...  
Keyword(s):  

2022 ◽  
pp. 105194
Author(s):  
L. Hernandez-Terrones ◽  
L. Martínez ◽  
J. Szamotulski ◽  
E. González-Partida ◽  
J.V. Morgan ◽  
...  

Nature ◽  
1993 ◽  
Vol 366 (6457) ◽  
pp. 731-734 ◽  
Author(s):  
Thomas E. Krogh ◽  
Sandra L. Kamo ◽  
Virgil L. Sharpton ◽  
Luis E. Marin ◽  
Alan R. Hildebrands
Keyword(s):  

2020 ◽  
Author(s):  
Jaime Urrutia-Fucugauchi ◽  
Ligia Perez-Cruz ◽  
Elia Escobar-Sanchez ◽  
Miriam Velasco-Villarreal ◽  
Edgar Garcia-Garnica

<p>Chicxulub crater was formed ~66 Ma ago by an asteroid impact at the Cretaceous/Paleogene (K/Pg) boundary on the Yucatan carbonate platform in the southern Gulf of Mexico. The crater is the youngest and best preserved of the three large impact basins, with a ~200 km diameter and multi-ring and peak ring morphology. The crater, covered by post-impact carbonate sediments with thickness up to ~1.1 km, has been investigated by geophysical studies and drilling programs. Initial drilling in Yucatan was carried out by the Pemex oil company, followed by the National University UNAM Chicxulub program, the ICDP Yaxcopoil-1 project and the IODP-ICDP Expedition 364 marine drilling. Here, results of combined paleomagnetic, rock magnetic, petrographic and geochemical studies are used to characterize the sequence and constrain the unit’s emplacement and crater formation. We analyze core samples of suevitic breccias and Paleogene carbonates from the Yaxcopoil-1 and Santa Elena boreholes drilled in the southern sector, inside and to the south of the crater rim marked by the ring of cenotes.  Magnetic hysteresis, low-field susceptibility and coercitivity analyses indicate that main carriers are titanomagnetites and magnetite. Mineralogical and magnetic properties indicate effects of hydrothermal alteration, associated with the high temperature system generated by the impact. Higher coercitivity minerals are also observed in some samples. In the carbonate sections, hydrothermal effects as marked by the geochemical logs decrease upwards from the breccia-carbonate contact. Alternating field and thermal demagnetization is used to investigate the magnetization vector composition and isolate the characteristic remanent components. Magnetic polarities defined from the inclination data show a sequence of reverse to normal, which correlate to polarity chrons 29r to 26r, with impact occurring within 29r chron.  The correlations of the magnetostratigraphy and stable isotopes indicate a hiatus at the basal Paleocene section. In Santa Elena cores, d<sup>13</sup>C values range from 1.2 to 3.5%<sub>0 </sub>and d<sup>18</sup>O values range from -1.4 to -4.8%<sub>0, </sub>with variation trends correlating with the marine carbon and oxygen isotope records for the late Maastrichtian and early Paleocene. The positive carbon isotopes indicate high productivity after the K/Pg extinction event, while the oxygen isotope values are more negative reflecting regional and local effects. Silica contents decrease from high in the suevites to low values in carbonates showing higher variability and then increased contents at the Paleocene-Eocene Thermal Maximum (PETM). The geochemical trends correlate in other elements including iron, titanium, potassium and aluminum that record impact-induced hydrothermal effects and possibly changing depositional conditions. Ca shows an opposite trend, with lower values in the upper suevitic breccias, higher values in the Paleocene carbonates and lower values in the PETM.</p>


2021 ◽  
pp. 106594
Author(s):  
E. Guzmán-Hidalgo ◽  
J.M. Grajales-Nishimura ◽  
G.P. Eberli ◽  
J.E. Aguayo-Camargo ◽  
J. Urrutia-Fucugauchi ◽  
...  
Keyword(s):  

1996 ◽  
Vol 127 (3) ◽  
pp. F11-F14 ◽  
Author(s):  
Martin Connors ◽  
Alan R. Hildebrand ◽  
Mark Pilkington ◽  
Carlos Ortiz-Aleman ◽  
Rene E. Chavez ◽  
...  
Keyword(s):  

Sign in / Sign up

Export Citation Format

Share Document