Pile capacity for eccentric inclined load in clay

1984 ◽  
Vol 21 (3) ◽  
pp. 389-396 ◽  
Author(s):  
G. G. Meyerhof ◽  
A.S. Yalcin
Keyword(s):  
Bearing Capacity ◽  
Ultimate Load ◽  
Offshore Structures ◽  
Ultimate Bearing Capacity ◽  
Pile Groups ◽  
Bridge Foundations ◽  
Inclined Load ◽  
Eccentric Load ◽  
Pile Cap ◽  
Load Tests

In connection with the design of offshore structures and bridge foundations, the ultimate bearing capacity of rigid piles and pile groups in clay has been determined under various combinations of eccentricity and inclination of the load varying from the vertical to horizontal directions. The results of load tests on single rigid model piles and freestanding groups are compared with theoretical estimates. The influence of eccentricity and inclination of the load on the ultimate bearing capacity can be represented by simple interaction relationships between the ultimate loads and moments and between the axial and normal components of the ultimate load. The effect of a pile cap resting on the soil in piled foundations and the influence of pile flexibility on the ultimate load are examined briefly. Key words: bearing capacity, clay, eccentric load, inclined load, pile groups, pile–soil interaction, rigid piles, ultimate load, ultimate moment.

Ultimate capacity of flexible piles under eccentric and inclined loads

1989 ◽  
Vol 26 (1) ◽  
pp. 34-42 ◽  
Author(s):  
G. G. Meyerhof ◽  
D. P. Ghosh
Keyword(s):  
Bearing Capacity ◽  
Soft Clay ◽  
Ultimate Bearing Capacity ◽  
Embedment Depth ◽  
Pile Groups ◽  
Single Model ◽  
Eccentric Load ◽  
Inclined Loads ◽  
Load Tests ◽  
Ultimate Moment

The ultimate bearing capacity of flexible single model piles and small pile groups of timber and nylon in loose sand and soft clay has been determined under various combinations of eccentricity and inclination of the load varying in direction from vertical to horizontal. The results of the load tests are presented in the form of polar bearing capacity diagrams and they are compared with the theoretical estimates based on the concept of an effective embedment depth in terms of the behaviour of equivalent rigid piles. Reasonable agreement has been found between the observed and predicted ultimate bearing capacity of flexible piles under any combination of eccentricity and inclination of loads. Key words: flexible piles, pile groups, ultimate bearing capacity, ultimate moment, model test, eccentric load, inclined load, sand, clay.

The bearing capacity of rigid piles and pile groups under inclined loads in clay

1981 ◽  
Vol 18 (2) ◽  
pp. 297-300 ◽  
Author(s):  
G. G. Meyerhof
Keyword(s):  
Bearing Capacity ◽  
Ultimate Bearing Capacity ◽  
Test Results ◽  
Pile Groups ◽  
Free Standing ◽  
Previous Theory ◽  
Inclined Loads ◽  
Load Tests ◽  
Batter Piles ◽  
Piled Foundations

The ultimate bearing capacity of rigid vertical and batter piles and pile groups in clay has been determined under various inclinations of the load, varying from the vertical to horizontal directions. The results of load tests on single model piles of different lengths and inclinations and on free-standing groups and piled foundations are compared with theoretical estimates. The influence of load inclination on the bearing capacity can be represented by simple interaction relationships between the axial and normal components of the ultimate load. The effect of eccentricity of the load on the ultimate bearing capacity of pile groups is discussed on the basis of previous theory and model test results.

The bearing capacity of rigid piles and pile groups under inclined loads in layered sand

1981 ◽  
Vol 18 (4) ◽  
pp. 514-519 ◽  
Author(s):  
G. G. Meyerhof ◽  
S. K. Mathur ◽  
A. J. Valsangkar
Keyword(s):  
Bearing Capacity ◽  
Ultimate Bearing Capacity ◽  
Test Results ◽  
Pile Groups ◽  
Free Standing ◽  
Previous Theory ◽  
Inclined Loads ◽  
Load Tests ◽  
Batter Piles ◽  
Theory And Model

The ultimate bearing capacity of rigid vertical and batter piles and pile groups in layered sand has been determined under various inclinations of the load varying from the vertical to horizontal directions. The results of load tests on single model piles of different inclinations and on free-standing groups are compared with theoretical estimates. The influence of load inclination on the bearing capacity can be represented by simple interaction relationships between the axial and normal components of the ultimate load. The effect of eccentricity of the load on the ultimate bearing capacity of pile groups is discussed on the basis of previous theory and model test results.

Ultimate pile capacity in layered soil under eccentric and inclined loads

1985 ◽  
Vol 22 (3) ◽  
pp. 399-402 ◽  
Author(s):  
G. G. Meyerhof ◽  
R. D. Purkayastha
Keyword(s):  
Bearing Capacity ◽  
Layered Soil ◽  
Clay Layer ◽  
Pile Groups ◽  
Eccentric Load ◽  
Pile Capacity ◽  
Foundation Model ◽  
Load Tests ◽  
Rigid Model ◽  
Single Piles

The ultimate bearing capacity of rigid model piles and pile groups in layered soil consisting of clay overlying sand has been investigated for various combinations of eccentricity and inclination of load and with varying thicknesses of clay layer. The effect of eccentricity and inclination of the load and thickness ratios of clay layer to pile embedment in the sand on the bearing capacity can be represented by simple interaction relationships to estimate the ultimate load. The results of load tests on single model piles and freestanding pile groups are presented in the form of polar bearing capacity diagrams and are compared with the theoretical estimates. The thickness of clay layer on the sand is found to have a significant influence on the bearing capacity of single piles and pile groups. Key words: pile foundation, model test, layered soil, eccentric load, inclined load, sand, clay, analysis, bearing capacity.

Bearing capacity of anisotropic cohesionless soils

1978 ◽  
Vol 15 (4) ◽  
pp. 592-595 ◽  
Author(s):  
G. G. Meyerhof
Keyword(s):  
Shear Strength ◽  
Bearing Capacity ◽  
Ultimate Bearing Capacity ◽  
Shallow Foundations ◽  
Test Results ◽  
Cohesionless Soils ◽  
Inclined Load ◽  
Load Tests

Previous test results of the anisotropic shear strength of cohesionless soils are reviewed. The theory of the ultimate bearing capacity of shallow foundations on homogeneous isotropic soils is extended to anisotropic cohesionless soils. The proposed method of analysis is compared with the results of some load tests on anisotropic sand. An extension of this method to foundations under inclined load is briefly discussed.

Ultimate bearing capacity of foundations on layered soils under inclined load

1978 ◽  
Vol 15 (4) ◽  
pp. 565-572 ◽  
Author(s):  
G. G. Meyerhof ◽  
A. M. Hanna
Keyword(s):  
Bearing Capacity ◽  
Ultimate Bearing Capacity ◽  
Model Tests ◽  
Clay Soils ◽  
Layered Soils ◽  
Inclined Load ◽  
Soft Layer ◽  
Soil Failure ◽  
Strip Footings

The ultimate bearing capacity of footings resting on subsoils consisting of two layers has been investigated for the cases of a dense or stiff layer overlying a weak deposit, and a loose or soft layer overlying a firm deposit. The analyses of different modes of soil failure are compared with the results of model tests on circular and strip footings on layered sand and clay soils.

scholarly journals Experimental and Numerical Investigation on the Bearing Behavior of Curved Continuous Twin I-Girder Composite Bridge with Precast Concrete Slab

2021 ◽  
Vol 2021 ◽  
pp. 1-18
Author(s):  
Chuandong Shen ◽  
Yifan Song ◽  
Lei Yan ◽  
Yuan Li ◽  
Xiaowei Ma ◽  
...  
Keyword(s):  
Yield Strength ◽  
Bearing Capacity ◽  
Ultimate Load ◽  
Ultimate Bearing Capacity ◽  
Experimental Result ◽  
Small Radius ◽  
Radius Of Curvature ◽  
Construction Scheme ◽  
Composite Bridge ◽  
Bearing Behavior

Curved twin I-girder composite bridge (TGCB) is becoming popular in Chinese highway bridge building. To study its ultimate bearing behavior, in this paper, one 1 : 5 scale intact model of a two-span curved continuous TGCB was tested to failure to evaluate its safety reserve and ductility. Afterwards, based on the experimental result, 3D FE models were developed and validated. At last, using the validated 3D FE models, the effect of construction scheme, radius of curvature, yield strength of steel, concrete compressive strength, crossbeams, and bottom lateral bracings on the ultimate bearing capacity were examined. The experimental results showed that the ultimate load (Pu) is approximate 13.6 times the service equivalent load. The cracking load and yielding load are approximately 0.12 and 0.47 Pu, respectively. The ductility coefficients are 4.06∼4.40. These above may indicate that the TGCB designed according to Chinese codes has good safety reserve and ductility. From parameter analysis results, it was concluded that the TGCB with full-support construction scheme has larger yield load and ultimate load compared with the one with erecting machine construction scheme. On the other hand, the ultimate bearing capacity reduces nonlinearly with the increase of curvature. Besides, the yield strength of steel, crossbeams, and bottom lateral bracings has a significant effect on the ultimate bearing capacity of curved TGCB. And the smaller the radius of curvature, the more obvious the effect of the latter two factors is. Unfortunately, it is unwise to continuous to improve the ultimate load by increasing the grade of steel for the TGCB when steel grade exceeds Q390. Moreover, in consideration of the big difference in bearing capacity between the inner girder and outer girder of the TGCB with small radius of curvature as well as the economy, it is suggested that the inner and outer steel girders of that TGCB should be designed differently.

Sign in / Sign up

Export Citation Format

Share Document