rigid model
Recently Published Documents


TOTAL DOCUMENTS

166
(FIVE YEARS 25)

H-INDEX

16
(FIVE YEARS 2)

2021 ◽  
Vol 1 (1) ◽  
Author(s):  
Ying Wu ◽  
Jikun Liu

AbstractWith the rapid development of gymnastics technology, novel movements are also emerging. Due to the emergence of various complicated new movements, higher requirements are put forward for college gymnastics teaching. Therefore, it is necessary to combine the multimedia simulation technology to construct the human body rigid model and combine the image texture features to display the simulation image in texture form. In the study, GeBOD morphological database modeling was used to provide the data needed for the modeling of the whole-body human body of the joint and used for dynamics simulation. Simultaneously, in order to analyze and summarize the technical essentials of the innovative action, this experiment compared and analyzed the hem stage of the cross-headstand movement of the subject and the hem stage of the 180° movement. Research shows that the method proposed in this paper has certain practical effects.


2021 ◽  
pp. 1-17
Author(s):  
Zhibo Sun ◽  
Dan Zhang ◽  
Zhilong Li ◽  
Shi Yan ◽  
Na Wang

Abstract High trafficability and stability are the most two significant features of the forestry chassis. In this study, in order to improve surface trafficability, a novel articulated wheel-legged forestry chassis(AWLFC) is presented. To balance the trafficability and stability, a serial suspension system which is a combination with the active four-bar linkage articulated suspension (AFLAS) and passive V shape rocker-bogie is proposed. Then, parameter optimization with a comprehensive object function is implemented not only to enhance the trafficability and stability benefit of the structure but also to reduce the wheel slip. After that, through the flexible kinematic model based on screw theory, characteristics such as leveling ability and surface profile accessibility of the chassis are analyzed. The minimum accessible radius is obtained as 3088mm, and the longitudinal and lateral leveling angle reaches to 22° and 28.7° separately. The new chassis performs better on leveling ability and surface profile accessibility than the forestry chassis in the current literature. Finally, compared with the simulation and prototype experiment, error rates of the flexible kinematic analysis are reduced by 12.2% and 8.6% related to the rigid model. Previously inaccessible forestry working environments can be available with the development of AWLFC.


2021 ◽  
pp. 1-54
Author(s):  
A. AVILA ◽  
MARCELO VIANA ◽  
A. WILKINSON

Abstract We explore new connections between the dynamics of conservative partially hyperbolic systems and the geometric measure-theoretic properties of their invariant foliations. Our methods are applied to two main classes of volume-preserving diffeomorphisms: fibered partially hyperbolic diffeomorphisms and center-fixing partially hyperbolic systems. When the center is one-dimensional, assuming the diffeomorphism is accessible, we prove that the disintegration of the volume measure along the center foliation is either atomic or Lebesgue. Moreover, the latter case is rigid in dimension three (this does not require accessibility): the center foliation is actually smooth and the diffeomorphism is smoothly conjugate to an explicit rigid model. A partial extension to fibered partially hyperbolic systems with compact fibers of any dimension is also obtained. A common feature of these classes of diffeomorphisms is that the center leaves either are compact or can be made compact by taking an appropriate dynamically defined quotient. For volume-preserving partially hyperbolic diffeomorphisms whose center foliation is absolutely continuous, if the generic center leaf is a circle, then every center leaf is compact.


2021 ◽  
pp. 429-436
Author(s):  
Vladimir Z. Kresin ◽  
Sergei G. Ovchinnikov ◽  
Stuart A. Wolf

This chapter discusses superconducting states in nature. The absence of resistance is the most remarkable manifestation of the superconducting state. But pair correlation is a general phenomenon that can be manifested in various systems, such as atomic nuclei, where the pairing is manifested in spectra, especially via the odd–even effect (the presence of unpaired nucleons makes it possible for nuclei to absorb a lower frequency of radiation than nuclei with an even number of nucleons can) and in the amplitudes of their momenta of inertia, which are smaller than in a rigid model. Another system, the neutron star, has an entirely different spatial scale. However, its low heat capacity leads to its rapid cooling, and the existence of a vortex structure affects the star’s rotation period. Finally, biologically active systems contain delocalised electrons, and the formation of electron pairs affects charge transfer, which is similar to Josephson tunnelling.


Complexity ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-12
Author(s):  
Uma Bharti ◽  
Pramod Kumar Vaishnav ◽  
S.M. Abo-Dahab ◽  
Jamel Bouslimi ◽  
K.H. Mahmoud

Irregularity may occur on the earth’s surface in the form of mountains due to the imperfection of the earth’s crust. To explore the influence of horizontally polarized shear waves on mountains, we considered the fluid-saturated porous medium (superficial layer) over an orthotropic semi-infinite medium with rigid (Model-I) and soft (Model-II) mountain surfaces for wave propagation. The mountain surface is defined mathematically as a periodic function of the time domain. The physical interpretation of materials’ structure has been explained in rectangular Cartesian coordinate system originated at the contact interface of layer and half-space. The displacement of the mountains has been derived by solving energy equations analytically. The influence of rigid and soft mountain surfaces on the phase velocity of shear waves has been demonstrated graphically (we used MATLAB software for graphical representations).


2020 ◽  
Vol 1 (2) ◽  
pp. 247-259
Author(s):  
Alexey Krushelnitsky ◽  
Kay Saalwächter

Abstract. Chemical shift anisotropy (CSA) and dipolar CODEX (Cenralband Only Detection of EXchange) experiments enable abundant quantitative information on the reorientation of the CSA and dipolar tensors to be obtained on millisecond–second timescales. At the same time, proper performance of the experiments and data analysis can often be a challenge since CODEX is prone to some interfering effects that may lead to incorrect interpretation of the experimental results. One of the most important such effects is RIDER (relaxation-induced dipolar exchange with recoupling). It appears due to the dipolar interaction of the observed X nuclei with some other nuclei, which causes an apparent decay in the mixing time dependence of the signal intensity reflecting not molecular motion, but spin flips of the adjacent nuclei. This may hamper obtaining correct values of the parameters of molecular mobility. In this contribution we consider in detail the reasons why the RIDER distortions remain even under decoupling conditions and propose measures to eliminate them. That is, we suggest (1) using an additional Z filter between the cross-polarization (CP) section and the CODEX recoupling blocks that suppresses the interfering anti-phase coherence responsible for the X-H RIDER and (2) recording only the cosine component of the CODEX signal since it is less prone to the RIDER distortions in comparison to the sine component. The experiments were conducted on rigid model substances as well as microcrystalline 2H ∕ 15N-enriched proteins (GB1 and SH3) with a partial back-exchange of labile protons. Standard CSA and dipolar CODEX experiments reveal a fast-decaying component in the mixing time dependence of 15N nuclei in proteins, which can be misinterpreted as a slow overall protein rocking motion. However, the RIDER-free experimental setup provides flat mixing time dependences, meaning that the studied proteins do not undergo global motions on the millisecond timescale.


Data in Brief ◽  
2020 ◽  
Vol 32 ◽  
pp. 106080
Author(s):  
Gerardo Caroppi ◽  
Kaisa Västilä ◽  
Paola Gualtieri ◽  
Juha Järvelä ◽  
Maurizio Giugni ◽  
...  

2020 ◽  
Vol 2020 ◽  
pp. 1-13
Author(s):  
Daniele Baraldi ◽  
Claudia Brito De Carvalho Bello ◽  
Antonella Cecchi ◽  
Filippo Ubertini

In this work, a refined rigid block model is proposed for studying the in-plane behavior of regular masonry. The rigid block model is based on an existing discrete/rigid model with rigid blocks and elastoplastic interfaces that already proven its effectiveness in representing masonry behavior in linear and nonlinear fields. In this case, the proposed model is improved by assuming rigid quadrilateral elements connected by one-dimensional nonlinear interfaces, which are adopted both to represent mortar (or dry) joints between the blocks and also to represent inner potential cracks into the blocks. Furthermore, the softening behavior of interfaces in tension and shear is taken into account. Several numerical tests are performed by considering masonry panels with regular texture subjected to compression and shear. Particular attention is given to the collapse mechanisms and the pushover curves obtained numerically and compared with existing numerical and laboratory results. Furthermore, the numerical tests aim to evaluate the applicability limits of the proposed model with respect to existing results.


2020 ◽  
Author(s):  
Alexey Krushelnitsky ◽  
Kay Saalwächter

Abstract. CSA and dipolar CODEX experiments enable obtaining abundant quantitative information on the reorientation of the CSA and dipolar tensors on the millisecond-second time scales. At the same time, proper performance of the experiments and data analysis can often be a challenge since CODEX is prone to some interfering effects that may lead to incorrect interpretation of the experimental results. One of the most important such effects is RIDER (Relaxation Induced Dipolar Exchange with Recoupling). It appears due to the dipolar interaction of the observed X-nuclei with some other nuclei, which causes an apparent decay in the mixing time dependence of the signal intensity reflecting not molecular motion but spin-flips of the adjacent nuclei. This may hamper obtaining correct values of the parameters of molecular mobility. In this contribution we consider in detail the reasons, why the RIDER distortions remain even under decoupling conditions and propose measures to eliminate them. Namely, we suggest the additional Z-filter between the cross-polarization section and the CODEX recoupling blocks, which suppresses the interfering anti-phase coherence responsible for the X-H RIDER. The experiments were conducted on rigid model substances as well as microcrystalline 2H/15N-enriched proteins (GB1 and SH3) with a partial back-exchange of labile protons. Standard CSA and dipolar CODEX experiments reveal a fast decaying component in the mixing time dependence of 15N nuclei in proteins, which can be interpreted as a slow overall protein rocking motion. However, the RIDER-free experimental setup provides flat mixing time dependencies meaning that the studied proteins do not undergo global motions on the millisecond time scale.


Sign in / Sign up

Export Citation Format

Share Document