IMPLEMENTATION OF THE CONDITIONAL MOMENT CLOSURE MODEL TO A TURBULENT NONPREMIXED H2/CO-AIR FLAME STABILIZED ON A BLUFF BODY

1999 ◽  
Vol 23 (3-4) ◽  
pp. 425-433 ◽  
Author(s):  
S.- H. Kim ◽  
T. Liu ◽  
K.Y. Huh
Keyword(s):  
Bluff Body ◽  
Reaction Rates ◽  
Moment Closure ◽  
Scalar Dissipation ◽  
Conditional Moment ◽  
Turbulent Diffusion Flame ◽  
Recirculating Flow ◽  
Conditional Moment Closure ◽  
Mass Fractions ◽  
Turbulent Nonpremixed

A turbulent nonpremixed flame of H2/CO-air stabilized on a bluff-body is simulated by the conditional moment closure (CMC) model. Full spatial variation of the conditional quantities is taken into account for an elliptic recirculating flow field. Comparison has shown reasonable agreement for the conditional and Favre mean temperature and mass fractions of CO and H20 between calculation and experiment. Overprediction of the peak OH mass fraction is attributed to inaccurate modelling of the conditional scalar dissipation rate. The CMC model is capable of predicting major features of a turbulent diffusion flame characterized by finite chemical reaction rates.

Modeling an Enclosed, Turbulent Reacting Methane Jet With the Premixed Conditional Moment Closure Method

2013 ◽  
Author(s):  
Scott Martin ◽  
Aleksandar Jemcov ◽  
Björn de Ruijter
Keyword(s):  
Turbulent Combustion ◽  
Large Scale ◽  
Reaction Rates ◽  
Moment Closure ◽  
Scalar Dissipation ◽  
Small Scale ◽  
Conditional Moment ◽  
Progress Variable ◽  
Conditional Moment Closure ◽  
Scale Turbulence

Here the premixed Conditional Moment Closure (CMC) method is used to model the recent PIV and Raman turbulent, enclosed reacting methane jet data from DLR Stuttgart [1]. The experimental data has a rectangular test section at atmospheric pressure and temperature with a single inlet jet. A jet velocity of 90 m/s is used with an adiabatic flame temperature of 2,064 K. Contours of major species, temperature and velocities along with velocity rms values are provided. The conditional moment closure model has been shown to provide the capability to model turbulent, premixed methane flames with detailed chemistry and reasonable runtimes [2]. The simplified CMC model used here falls into the class of table lookup turbulent combustion models where the chemical kinetics are solved offline over a range of conditions and stored in a table that is accessed by the CFD code. Most table lookup models are based on the laminar 1-D flamelet equations, which assume the small scale turbulence does not affect the reaction rates, only the large scale turbulence has an effect on the reaction rates. The CMC model is derived from first principles to account for the effects of small scale turbulence on the reaction rates, as well as the effects of the large scale mixing, making it more versatile than other models. This is accomplished by conditioning the scalars with the reaction progress variable. By conditioning the scalars and accounting for the small scale mixing, the effects of turbulent fluctuations of the temperature on the reaction rates are more accurately modeled. The scalar dissipation is used to account for the effects of the small scale mixing on the reaction rates. The original premixed CMC model used a constant value of scalar dissipation, here the scalar dissipation is conditioned by the reaction progress variable. The steady RANS 3-D version of the open source CFD code OpenFOAM is used. Velocity, temperature and species are compared to the experimental data. Once validated, this CFD turbulent combustion model will have great utility for designing lean premixed gas turbine combustors.

scholarly journals Modelling of a Bluff-Body Stabilised Premixed Flames Close to Blow-Off

Computation ◽  
2021 ◽  
Vol 9 (4) ◽  
pp. 43
Author(s):  
Shokri Amzin ◽  
Mohd Fairus Mohd Yasin
Keyword(s):  
Bluff Body ◽  
Fluid Dynamic ◽  
Premixed Flames ◽  
Pollutant Emissions ◽  
Moment Closure ◽  
Recirculation Region ◽  
Scalar Dissipation ◽  
Average Error ◽  
Conditional Moment ◽  
Lean Premixed

As emission legislation becomes more stringent, the modelling of turbulent lean premixed combustion is becoming an essential tool for designing efficient and environmentally friendly combustion systems. However, to predict emissions, reliable predictive models are required. Among the promising methods capable of predicting pollutant emissions with a long chemical time scale, such as nitrogen oxides (NOx), is conditional moment closure (CMC). However, the practical application of this method to turbulent premixed flames depends on the precision of the conditional scalar dissipation rate,. In this study, an alternative closure for this term is implemented in the RANS-CMC method. The method is validated against the velocity, temperature, and gas composition measurements of lean premixed flames close to blow-off, within the limit of computational fluid dynamic (CFD) capability. Acceptable agreement is achieved between the predicted and measured values near the burner, with an average error of 15%. The model reproduces the flame characteristics; some discrepancies are found within the recirculation region due to significant turbulence intensity.

Large Eddy Simulation of an Enclosed Turbulent Reacting Methane Jet With the Tabulated Premixed Conditional Moment Closure Method

2016 ◽  
Vol 138 (10) ◽  
Author(s):  
Carlos Velez ◽  
Scott Martin ◽  
Aleksander Jemcov ◽  
Subith Vasu
Keyword(s):  
Turbulent Combustion ◽  
Moment Closure ◽  
Scalar Dissipation ◽  
Combustion Model ◽  
Conditional Moment ◽  
Eddy Simulation ◽  
Conditional Moment Closure ◽  
Major Species ◽  
Large Eddy ◽  
Closure Method

The tabulated premixed conditional moment closure (T-PCMC) method has been shown to provide the capability to model turbulent, premixed methane flames with detailed chemistry and reasonable runtimes in Reynolds-averaged Navier–Stokes (RANS) environment by Martin et al. (2013, “Modeling an Enclosed, Turbulent Reacting Methane Jet With the Premixed Conditional Moment Closure Method,” ASME Paper No. GT2013-95092). Here, the premixed conditional moment closure (PCMC) method is extended to large eddy simulation (LES). The new model is validated with the turbulent, enclosed reacting methane backward facing step data from El Banhawy et al. (1983, “Premixed, Turbulent Combustion of a Sudden-Expansion Flow,” Combust. Flame, 50, pp. 153–165). The experimental data have a rectangular test section at atmospheric pressure and temperature with an inlet velocity of 10.5 m/s and an equivalence ratio of 0.9 for two different step heights. Contours of major species, velocity, and temperature are provided. The T-PCMC model falls into the class of table lookup turbulent combustion models in which the combustion model is solved offline over a range of conditions and stored in a table that is accessed by the computational fluid dynamic (CFD) code using three controlling variables: the reaction progress variable (RPV), variance, and local scalar dissipation rate. The local scalar dissipation rate is used to account for the affects of the small-scale mixing on the reaction rates. A presumed shape beta function probability density function (PDF) is used to account for the effects of subgrid scale (SGS) turbulence on the reactions. SGS models are incorporated for the scalar dissipation and variance. The open source CFD code OpenFOAM is used with the compressible Smagorinsky LES model. Velocity, temperature, and major species are compared to the experimental data. Once validated, this low “runtime” CFD turbulent combustion model will have great utility for designing the next generation of lean premixed (LPM) gas turbine combustors.

Sign in / Sign up

Export Citation Format

Share Document