Investigations of the Hydraulic Characteristics of Stilling Basin with Baffle-Blocks Using an Integrated SPH Method

2019 ◽  
Vol 17 (08) ◽  
pp. 1950051
Author(s):  
X. J. Ma ◽  
Y. L. Yan ◽  
G. Y. Li ◽  
M. Geni ◽  
M. Wang
Keyword(s):  
Energy Dissipation ◽  
Incompressible Flows ◽  
Particle Methods ◽  
Solid Boundary ◽  
Discharge Process ◽  
Sph Method ◽  
Stilling Basin ◽  
Dissipation Effect ◽  
Kernel Gradient Correction ◽  
Baffle Block

The stilling basin has been one of the most powerful hydraulic structures for the dissipation of the flow energy. Meshfree and particle methods have special advantages in modeling incompressible flows with free surfaces. In this paper, an integrated smoothed particle hydrodynamics (SPH) method is developed to model energy dissipation process of stilling basins. The integrated SPH includes the kernel gradient correction (KGC) technique, the dynamic solid boundary treatment, [Formula: see text]-SPH model and density reinitialization. We first conducted the simulations of dam-breaking and hydraulic jump to validate the accuracy of the present method. The present simulation results agree well with the experimental observations and numerical results from other sources. Then the discharge process of stilling basin with baffle-blocks is simulated with the integrated SPH. It is demonstrated that the detailed discharge process can be well captured by this method. The energy dissipation effect of stilling basin could be significantly improved by the baffle-blocks. The structure and position of the baffle-block directly affect the energy dissipation effect, while the height of the baffle-block has big influence on the drainage capacity.

Numerical Simulation of Violent Impinging Jet Flows with Improved SPH Method

2016 ◽  
Vol 13 (04) ◽  
pp. 1641001 ◽  
Author(s):  
J. R. Shao ◽  
S. M. Li ◽  
M. B. Liu
Keyword(s):  
Free Surface ◽  
Pressure Field ◽  
Surface Condition ◽  
Time History ◽  
Impinging Jet ◽  
Jet Flows ◽  
Solid Boundary ◽  
Sph Method ◽  
Pressure Time ◽  
Kernel Gradient Correction

This paper presents an implementation of an improved smoothed particle hydrodynamics (SPH) method for simulating violent water impinging jet flow problems. The presented SPH method involves three major modifications on the traditional SPH method, (1) The kernel gradient correction (KGC) and density correction are used to improve the computational accuracy and obtain smoothed pressure field, (2) a coupled dynamic solid boundary treatment (SBT) is used to remove the numerical oscillation near the solid boundary and ensure no penetration condition, (3) a free surface condition, which is obtained from the summation of kernel function and volume, is used to describe the water jet accurately. Different cases about violent impinging jet flows are simulated. The influences of impact velocity and angles are investigated. It is demonstrated that the presented SPH method has very good performance with accurate impinging jet patterns and pressure field distribution. It is also found that the pressure time histories of observation points are greatly influenced by the rarefaction wave from surrounding air. Closer distance from free surface can lead to quicker decay of the pressure time history.

Laboratory study of stilling basin using trapezoidal bed elements

2020 ◽  
Vol 29 (4) ◽  
pp. 409-420
Author(s):  
Thair Al-Fatlawi ◽  
Nassrin Al-Mansori ◽  
Nariman Othman
Keyword(s):  
Energy Dissipation ◽  
Laboratory Study ◽  
Hydraulic Jump ◽  
Stilling Basin ◽  
Smooth Model ◽  
Stilling Basins ◽  
Spillway Structures ◽  
Baffle Block ◽  
Pressure Driven

When designing dam spillway structures, the most significant consideration is the energy dissipation arrangements. Different varieties of baffle blocks and stilling basins have been used in this context. However, the hydraulic jump form of stilling basin is considered to be the most suitable. The main objective of this research was to introduce four different baffle block shapes (models arranged from A to D, installed at slopes 0.00, 0.04, 0.06 and 0.08 in the stilling basins). To illustrate the consequences for the qualities of pressure-driven bounce, each model was attempted in the bowl. The trials applied Froude numbers between 6.5 and 9.2. The puzzle square model D provided the best outcomes compared to the models A, B, C and smooth. Model D with different models at inclines 0.00, 0.04, 0.06 and 0.08 was used to consider the impacts of perplex hinders on water driven-bounce when bed slants were changed. When the model D baffle used instead of a smooth bed at 0.08 slope, the reduction in y2 / y1 reached 12.8%, and Lj / y1 was 18.9%. Among the different bed slopes, a normal decrease in y2 / y1 ranged from approximately 10.3%, whereas the normal decrease in Lj / y1 was about 13.8% when the model D baffle was used instead of the model A baffle with a horizontal slope bed of 0.00. The results show that the new shapes led to a decrease in sequent profundity proportion and length of jump proportion; however, the energy dissipation proportion increased.

scholarly journals Effect of baffle block configurations on characteristics of hydraulic jump in adverse stilling basins

2018 ◽  
Vol 162 ◽  
pp. 03005
Author(s):  
Ali Abbas ◽  
Haider Alwash ◽  
Ali Mahmood
Keyword(s):  
Energy Dissipation ◽  
Hydraulic Jump ◽  
Block Model ◽  
Double Row ◽  
Stilling Basin ◽  
Depth Ratio ◽  
Stilling Basins ◽  
Sequent Depth ◽  
Baffle Block ◽  
Energy Dissipation Ratio

The construction of stilling basin with adverse slope change the characteristics of hydraulic jump such as sequent depth ratio, length of jump ratio, length of roller and energy dissipation ratio, consequently the dimensions of stilling basin are changed, also using baffle blocks with different configurations develop these characteristics. In this study different shapes of baffle block (models (A), (B), (C) and (D)) installed in the stilling basins at adverse slopes (- 0.03, - 0.045, - 0.06) in addition to horizontal bed, all these models are tested in the stilling basin to show their effects on the characteristics of hydraulic jump, the experiments applied for the range of Froude number (Fr1) between 3.99 and 7.48. The baffle block model (D) showed good results when compared with models (B) and (C), therefore it used with arrangement of (single and double row) and compared with baffle block model (A) at slopes (0, - 0.03, - 0.045, - 0.06) to study the effects of baffle blocks on hydraulic jump when bed slopes are changed. In general using baffle block caused a reduction in sequent depth ratio, length of jump ratio and the length of the roller, but the energy dissipation ratio increased.

A Numerical Investigation Into the Impact Pressures of Different Base Forms Using SPH Method

2014 ◽  
Author(s):  
Zhen Chen ◽  
Li Zou ◽  
Zhi Zong
Keyword(s):  
Free Surface Flows ◽  
Solid Boundary ◽  
Sph Method ◽  
Strong Discontinuities ◽  
Weakly Compressible ◽  
Base Form ◽  
Boundary Treatment ◽  
Sph Model ◽  
Dam Breaking ◽  
The Impact

In this paper, the impact pressures of two different base forms are comparatively studied using Smoothed Particle Hydrodynamics (SPH) method. It is summarized from previous works that the improved weakly compressible SPH model shows better performances than incompressible SPH model in numerical simulations of free surface flows accompany with large deformations and strong discontinuities. Such advantages are observed in numerical accuracy, stability and efficiency. The weakly compressible SPH model used in this paper is equipped with some new correction algorithms, among which include the density reinitialization algorithm and a new coupled dynamic Solid Boundary Treatment (SBT) on solid boundaries. The new boundary treatment combines the advantages of both the repulsive boundary treatment and the dynamic boundary treatment, intending to obtain more stable and accurate numerical results. A benchmark test of dam breaking is conducted to prove the reliability of the numerical model used in this paper. Two representative cases, among which one has one cavity and the other one has three cavities, are numerically investigated and compared to support the conclusion that the base form with cavities generally experience lower local and overall impact pressures than the base form of flat plate. It is found that with the application of cavities on the bottom, the peak values of the boundary pressure near central bottom significantly decrease, leading to smaller force load and better structural stability. The mechanisms of such phenomenon might be the pressure absorption effect conducted by the cavities.

Energy Dissipation Pool for a SAF Stilling Basin

1987 ◽  
Vol 3 (1) ◽  
pp. 52-56 ◽  
Author(s):  
C. E. Rice ◽  
F. W. Blaisdell
Keyword(s):  
Energy Dissipation ◽  
Stilling Basin

scholarly journals Energy Dissipation in Solid Roller Bucket and Controlled Stilling Basin for Ogee Stepped Spillway

2019 ◽  
Vol 8 (4) ◽  
pp. 2109-2112
Keyword(s):  
Energy Dissipation ◽  
Laboratory Experiments ◽  
Ideal Condition ◽  
Stepped Spillway ◽  
Type Ii ◽  
Dimensional Parameter ◽  
Stilling Basin ◽  
Sequent Depth ◽  
Tail Water ◽  
The Ideal

Hydraulic jump type II stilling basin is generally preferred as an energy dissipator for ogee spillway but it is uneconomical due to longer structure. On the other hand, roller bucket uses relatively shorter structure over a sloping apron or horizontal stilling basin. In this study, an attempt has been made to evaluate the performance of an ogee profile stepped spillway in combination with solid roller bucket and stilling basin type II for energy dissipation. Laboratory experiments are performed on a physical working model of ogee profile stepped spillway at discharge ranging from 0.0032 to 0.0069 m3 /s for a head of 1.5m, 4m & 7m and the results compared for energy dissipation (non-dimensional parameter (y c / h) = 0.69). The model results show that stepped spillway model without v-notch achieves 92.40 % energy dissipation. Thus this model is found to be more suitable to acquire the ideal condition of sequent depth and tail water depth in stilling basin for all the discharges.

A STABLE LARGE DEFORMATION CORRECTED SPH METHOD BASED ON STABILIZED CONFORMING NODAL INTEGRATION AND LAGRANGIAN KERNELS

2012 ◽  
Vol 09 (04) ◽  
pp. 1250057
Author(s):  
S. WANG
Keyword(s):  
Large Deformation ◽  
Smoothed Particle Hydrodynamics ◽  
Solid Mechanics ◽  
Particle Methods ◽  
Sph Method ◽  
Nodal Integration ◽  
Particle Hydrodynamics ◽  
Smoothed Particle ◽  
Meshless Approximation ◽  
Complex Phenomena

In this paper, we propose a Galerkin-based smoothed particle hydrodynamics (SPH) formulation with moving least-squares meshless approximation, applied to solid mechanics and large deformation. Our method is truly meshless and based on Lagrangian kernel formulation and stabilized nodal integration. The performance of the methodology proposed is tested through various simulations, demonstrating the attractive ability of particle methods to handle severe distortions and complex phenomena.

Sign in / Sign up

Export Citation Format

Share Document