The U.S. Department of Energy Efforts in Fuel Cells for Portable Power Applications

2019 ◽  
Vol 30 (1) ◽  
pp. 337-343 ◽  
Author(s):  
Donna Ho ◽  
John P. Kopasz ◽  
Thomas G. Benjamin ◽  
Walt Podolski
Author(s):  
S. H. Chan ◽  
G. B. Jung ◽  
F. B. Weng ◽  
A. Su

Fuel cells provide a clean and efficient alternative fuel technology for transportation, residential and portable power applications. From political, social, economic, energy, environmental and technological considerations, the emerging fuel cell technology is undoubtedly well worthy of long-term investment in Taiwan. In view of the success and manufacture capability of electronics and IT industries, Taiwan may play an active role in fuel cell manufacturing and is thus conducive for international strategic alliance, both in R&D and manufacturing activities. This article provides an overview of Taiwan’s technological activities and accomplishments in fuel cells, and makes recommendations for the country’s future development and commercialization of fuel cell applications.


2013 ◽  
Vol 135 (09) ◽  
pp. 40-45
Author(s):  
Mark Crawford

This article discusses the use of fuel cell-powered vehicles that aim to change the face of transportation. These fuel cell-powered vehicles are expected to have a significant impact on reducing both the emissions implicated in global climate change and those that cause local smog. Fuel cells electrochemically oxidize a fuel without burning, thereby avoiding the inefficiencies and pollution associated with the traditional combustion technologies. The U.S. Department of Energy is working with researchers at the University of Waterloo in Ontario and elsewhere to develop non-precious materials to replace the platinum catalysts in fuel cells. European scientists have developed a material for converting hydrogen and oxygen to water that uses only 10% of the amount of platinum that is normally required. The researchers discovered that the efficiency of the nanometer-sized catalyst particles is greatly influenced by their geometric shape and atomic structure. Mechanical engineers play a crucial role in the development of both fuel cell and hydrogen production technologies.


Author(s):  
Brian A. Bucci ◽  
Jeffrey S. Vipperman ◽  
William Clark ◽  
J. Peter Hensel ◽  
Jimmy Thornton ◽  
...  

Maldistribution of fuel across the cells of a fuel cell stack is an issue that can contribute to poor cell performance and possible cell failure. It has been proposed that an array of microvalves could promote even distribution of fuel across a fuel cell stack. A piezoelectric microvalve has been developed for this purpose. This valve can be tuned to a nominal flow rate (and failure position) from which the actuator would either increase or decrease the flow rate and fuel. The valve can successfully regulate the flow of fuel from 0.7 to 1.1 slpm of hydrogen in the range of temperatures from 80° to 100°C and has been tested over pressure drops from 0.5 to 1 psi. A bank of these valves is currently being tested in a four-cell stack at the U.S. Department of Energy National Energy Technology Laboratory.


1982 ◽  
Vol 14 (12) ◽  
pp. 45-59 ◽  
Author(s):  
R L Jolley ◽  
R B Cumming ◽  
N E Lee ◽  
J E Thompson ◽  
L R Lewis

The principal objective of this research program was to examine the effects of disinfection by chlorine, ozone, and ultraviolet light (uv) irradiation on nonvolatile organic constituents relative to chemical effects and the formation of micropollutants. In a comparative study of highly concentrated samples of effluents from nine wastewater treatment plants, it was determined that disinfection with chlorine or ozone both destroys and produces nonvolatile organic constituents including mutagenic constituents. The chemical effects of disinfection by uv irradiation were relatively slight, although the mutagenic constituents in one effluent were eliminated by this treatment. The nine wastewater treatment plants were selected by using the following criteria: disinfection method, nature of wastewater source, type of wastewater treatment, standards for quality of treatment, and geographical location. The treatment plants varied from pilot plant and small plants [0.05 m3/s (1 Mgd)] treating principally domestic waste to large plants [4.4 m3/s (100 Mgd)] treating principally industrial waste. Four plants used only chlorine for disinfection, four used ozone for disinfection, and one used uv irradiation for disinfection. Eight treatment plants used conventional secondary or more advanced wastewater treatment, and one plant used primary treatment. The following methodology was used in this investigation: grab sample collection of 40-L samples of undisinfected and disinfected effluents; concentration of the effluents by lyophilization; high-pressure liquid chromatographic separation of nonvolatile organic constituents in effluent concentrates using uv absorbance, cerate oxidation, and fluorescence detectors; bacterial mutagenicity testing of concentrates and chromatographic fractions; and identification and characterization of nonvolatile organic constituents in mutagenic HPLC fractions. With these procedures, over 100 micropollutants were identified in the wastewater effluent concentrates. Interplant comparison revealed considerable variability in the presence of mutagenic nonvolatile organic constituents in the undisinfected effluent concentrates as well as much variability in the destruction of the mutagenic constituents and the formation of other mutagenic constituents as a result of disinfection. Moreover, the effects varied on samples collected at the same wastewater treatment plant at different periods. No micropollutants known to be mutagens were identified in the mutagenic HPLC fractions separated from the undisinfected, chlorinated, and ozonated effluent concentrates. The mutagenic activity of the nonvolatile organic constituents in one chlorinated effluent concentrate was not attributable to organic chloramines. Most of the mutagens detected in effluent concentrates are direct acting and do not require metabolic activation. Both base-pair substitution mutagens and frame-shift mutagens occurred in the wastewater concentrates, but the former type was more frequent. For many of the compounds in effluents, strain TA-1535 was more sensitive than strain TA-100 in detecting base-pair substitution mutagens. *Research sponsored by the U.S. Department of Energy and the U.S. Environmental Protection Agency. The work was carried out at the Oak Ridge National Laboratory, which is operated by the U.S. Department of Energy under contract W-7405-eng-26 with the Union Carbide Corporation.


Sign in / Sign up

Export Citation Format

Share Document