Use Co- and Ni-Free Air Electrode in Solid Oxide Cell Manufacturing for Electrolysis and Fuel Cell Applications

2021 ◽  
Vol 103 (1) ◽  
pp. 581-590
Author(s):  
Claire Julie Ferchaud ◽  
Frans Berkel ◽  
Loek Berkeveld ◽  
Miranda Heijink-Smith ◽  
Jakobert Veldhuis ◽  
...  
2021 ◽  
Vol MA2021-03 (1) ◽  
pp. 226-226
Author(s):  
Claire Julie Ferchaud ◽  
Frans Berkel ◽  
Loek Berkeveld ◽  
Miranda Heijink-Smith ◽  
Jakobert Veldhuis ◽  
...  

Author(s):  
W.T. Ju ◽  
S.H. Hong

Abstract The atmospheric pressure plasma spray processes for functional layers of the tubular solid oxide fuel cell are developed to build a fuel cell structure consisting of air electrode, ceramic electrolyte, and fuel electrode. Further more the characteristics of each film are also investigated. The layers of LSM (La0.65Sr0.35MnO3) air electrode and Ni/8YSZ fuel electrode have porosities of 23 ~32 % sufficient for supplying fuel and oxidant gases efficiently to electrochemical reaction interfaces. The measured electrical conductivities of the electrodes are higher than 90 S/cm at 1000 °C, which satisfy the requirement as the current collecting electrodes. The YSZ electrolyte film has a high ionic conductivity of 0.07 S/cm at 1000 °C, but shows a bit too porous to block the oxygen molecule penetration through it. A unit tubular SOFC is fabricated by the optimized plasma spray processes for depositing each functional film and forming a porous cylindrical supporting tube of the cell, and turns out to have a promising capability of electricity generation.


2021 ◽  
Author(s):  
Bryan Blackburn ◽  
◽  
Yue Li ◽  
Stelu Deaconu ◽  
Lei Wang ◽  
...  

2019 ◽  
Vol 35 (1) ◽  
pp. 445-450 ◽  
Author(s):  
Lide M. Rodriguez-Martinez ◽  
Mikel Rivas ◽  
Laida Otaegi ◽  
Nuria Gomez ◽  
Mario Alberto Alvarez ◽  
...  

Author(s):  
C. Stoots ◽  
J. O’Brien ◽  
T. Cable

The Idaho National Laboratory has been researching the application of solid-oxide fuel cell technology for large-scale hydrogen production. As a result, the Idaho National Laboratory has been testing various cell designs to characterize electrolytic performance. NASA, in conjunction with the University of Toledo, has developed a new cell concept with the goals of reduced weight and high power density. This paper presents results of the INL’s testing of this new solid oxide cell design as an electrolyzer. Gas composition, operating voltage, and other parameters were varied during testing. Results to date show the NASA cell to be a promising design for both high power-to-weight fuel cell and electrolyzer applications.


2021 ◽  
pp. 138765
Author(s):  
F. Monaco ◽  
E. Effori ◽  
M. Hubert ◽  
E. Siebert ◽  
G. Geneste ◽  
...  

Author(s):  
Ananda Himansu ◽  
Joshua E. Freeh ◽  
Christopher J. Steffen ◽  
Robert T. Tornabene ◽  
Xiao-Yen J. Wang

A system level analysis, inclusive of mass, is carried out for a cryogenic hydrogen fueled hybrid solid oxide fuel cell and bottoming gas turbine (SOFC/GT) power system. The system is designed to provide primary or secondary electrical power for an unmanned aerial vehicle (UAV) over a high altitude, long endurance mission. The net power level and altitude are parametrically varied to examine their effect on total system mass. Some of the more important technology parameters, including turbomachinery efficiencies and the SOFC area specific resistance, are also studied for their effect on total system mass. Finally, two different solid oxide cell designs are compared to show the importance of the individual solid oxide cell design on the overall system. We show that for long mission durations of 10 days or more, the fuel mass savings resulting from the high efficiency of an SOFC/GT system more than offset the larger powerplant mass resulting from the low specific power of the SOFC/GT system. These missions therefore favor high efficiency, low power density systems, characteristics typical of fuel cell systems in general.


Sign in / Sign up

Export Citation Format

Share Document