scholarly journals Compact Multiband Printed IFA on Electromagnetic Band-Gap Structures Ground Plane for Wireless Applications

2013 ◽  
Vol 2013 ◽  
pp. 1-9 ◽  
Author(s):  
Dalia Elsheakh ◽  
Esmat Abdallah
Keyword(s):  
Band Gap ◽  
Ground Plane ◽  
Split Ring Resonator ◽  
Split Ring ◽  
Electromagnetic Band Gap ◽  
Physical Size ◽  
Wireless Applications ◽  
Data Rates ◽  
Different Shapes ◽  
Increasing Demand

The fourth mobile generation requires of multistandard operating handsets of small physical size as well as has an increasing demand for higher data rates. Compact multiband printed inverted-F antennas (IFAs) for available wireless communications are proposed in this paper. A new design of a printed IFA based on a uniplanar compact EBG concept is proposed. An L-loaded printed IFA shaped over an artificial ground plane is designed as the main antenna to cover the GSM, LTE, UMTS, bluetooth, and WLAN. The multi-band is created by means of an electromagnetic band-gap (EBG) structure that is used as a ground plane. Different shapes of uniplanar EBG as ring, split ring resonator, and a spiral rather than mushroom-like structure are investigated. The proposed antenna is built on the uniplanar EBG ground plane with a size of 35×45 mm2, which is suitable for most of the mobile devices.

Compact multiband printed-IFA on electromagnetic band-gap structures for wireless applications

2013 ◽  
Vol 5 (4) ◽  
pp. 551-559 ◽  
Author(s):  
Dalia M. Elsheakh ◽  
Esmat A. Abdallah
Keyword(s):  
Band Gap ◽  
Ground Plane ◽  
Split Ring Resonator ◽  
Fourth Generation ◽  
Electromagnetic Band Gap ◽  
Physical Size ◽  
Wireless Applications ◽  
Data Rates ◽  
Increasing Demand ◽  
Multi Band

Fourth generation mobiles require multi-standard operating handsets with small physical size as well as increasing demand for higher data rates. Compact multi-band printed inverted-F antennas (IFA) for available wireless communications are proposed in this paper. New design of printed IFA based on uniplanar compact electromagnetic band-gap (EBG) structure concept is proposed. A printed-IFA with L-load shaped over an artificial ground plane is designed as the main antenna to cover most wireless applications such as GSM, LTE, UMTS, Bluetooth, Wimax, and WLAN. The multi-band is created by means of an EBG structure that is used as a ground plane. Different shapes of uniplanar EBG such as ring, split ring resonator, and spiral rather than mushroom-like structure are investigated. The proposed antenna is built on the uniplanar EBG ground plane with size of 35 × 45 mm2, which is suitable for most of the mobile devices.

Comparison of electromagnetic band gap and split-ring resonator microstrip lines as stop band structures

2005 ◽  
Vol 44 (4) ◽  
pp. 376-379 ◽  
Author(s):  
J. García-García ◽  
J. Bonache ◽  
I. Gil ◽  
F. Martín ◽  
R. Marqués ◽  
...  
Keyword(s):  
Band Gap ◽  
Ring Resonator ◽  
Stop Band ◽  
Split Ring Resonator ◽  
Split Ring ◽  
Band Structures ◽  
Electromagnetic Band Gap ◽  
Microstrip Lines

A Novel Tri-Band Ultra-Wideband Antenna with Deformed Split Ring Resonator for WLAN/WIMAX Applications

2015 ◽  
Vol 713-715 ◽  
pp. 1265-1268
Author(s):  
Xiang Lai Zheng ◽  
Qing Fan Shi ◽  
Dan Feng Lu ◽  
Chang Yi Ji
Keyword(s):  
Ring Resonator ◽  
Ground Plane ◽  
Split Ring Resonator ◽  
Ultra Wideband ◽  
Uwb Antenna ◽  
Split Ring ◽  
Wideband Antenna ◽  
X Band ◽  
Increasing Demand ◽  
Multi Band

With the increasing demand for different applications of antennas, especially multi-band and ultra-wideband antenna, we propose a novel tri-band, ultra-wideband (UWB) antenna with deformed split ring resonator (DSRR). The antenna consists of a partly covered ground plane and a deformed split ring resonator. By integrating the partly covered ground plane and the deformed split ring resonator and optimizing with CST Microwave Studio numerically, the proposed antenna produces three working bands ranging from 2.87GHz to 3.92GHz, 5.08 to 6.30GHz and 7.55 to 9.32GHz, which also satisfy the requirement of UWB. The three working bands cover the WIMAX band in 3.5GHz, the WLAN bands in 5.2/5.8GHz, and X-band, respectively. The radiation pattern is omnidirectional and the direction gain at every frequency is above 3.2 dBi. So the proposed antenna is suitable for multi-band communication applications.

scholarly journals Effect of disorder on magnetic resonance band gap of split-ring resonator structures

2004 ◽  
Vol 12 (24) ◽  
pp. 5896 ◽  
Author(s):  
Koray Aydin ◽  
Kaan Guven ◽  
Nikos Katsarakis ◽  
Costas M. Soukoulis ◽  
Ekmel Ozbay
Keyword(s):  
Magnetic Resonance ◽  
Band Gap ◽  
Ring Resonator ◽  
Split Ring Resonator ◽  
Split Ring ◽  
Resonance Band ◽  
Effect Of Disorder

scholarly journals Performance Evaluation of Meander Line Implantable Antenna integrated with EBG Based Ground for Anatomical Realistic Model

2019 ◽  
Vol 18 (1) ◽  
pp. 1-10
Author(s):  
Sadia Sultana ◽  
Rinku Basak
Keyword(s):  
Band Gap ◽  
Ground Plane ◽  
Wide Band ◽  
Realistic Model ◽  
Radiation Mechanism ◽  
Electromagnetic Band Gap ◽  
Antenna Performance ◽  
Human Models ◽  
Implantable Antenna ◽  
Meander Line

A unique design and meander line implantable antenna is examined in this paper which satisfies the requirements of ultra-wide band. The designed antenna is integrated with the electromagnetic band gap (EBG) structure based ground plane to enhance the performance. Rectangular electromagnetic band gap (EBG) structures are represented here to evaluate the antenna performance. This compact and efficient MLA antenna is applied to improve the antenna performance for numerous implantable scenarios and biomedical applications. The proposed antenna with EGB ground plane is designed for both the simplified model and anatomical realistic models for the human body and executed the performance in bio-environment. To approve the results of implantable antennas more correctly, simulation is analyzed using anatomical realistic human models. The ultimate design has the whole dimension is 15.2 x 8.8 m2. The thickness of the antenna is about 0.8 mm. FR4 is chosen as the substrate material and Copper is chosen as the patch material. The antenna is enclosed biocompatible material with silicon inside the tissue in order to protect patient safety. Significant parameters such as S11 parameter, Far field (radiation pattern), VSWR, Efficiency, Directivity, Gain of the proposed antenna have calculated and measured the performance both the simplified and realistic human models. Comparison Analysis of S11 parameter for different substrate materials and patch materials have observed. The radiation mechanism and modified design of the implantable antenna reducing Specific Absorption Rate (SAR) for safety issues. All the simulation results and measurements are obtained from CST Microwave Studio to validate the design.

Sign in / Sign up

Export Citation Format

Share Document